The melt spinning technique is used to obtain non-equiatomic high-entropy alloy ribbon 80 μm thick. The X-ray phase analysis, scanning and transmission electron microscopies are used to study elemental and phase compositions and the defect substructure of the alloy ribbon.
Similar content being viewed by others
References
V. E. Gromov, S. V. Konovalov, Yu. F. Ivanov, and K. A. Osintsev, Adv. Struct. Mater., 107, 110 (2021).
B. Cantor, I. T. H. Chang, P. Knight, and A. J. B. Vincent, Mat. Sci. Eng. A-Struct., 375–377, 213–218 (2004); https://doi.org/10.1016/j.msea.2003.10.257.
V. E. Gromov, Yu. F. Ivanov, K. A. Osintsev, Yu. A. Shlyarova, and I. A. Panchenko, High-Entropy Alloys: Structure and Properties [in Russian], RuScience. Moscow (2022).
B. S. Murty, J. W. Yeh, S. Ranganathan, and P. P. Bhattacharjee, High-Entropy Alloys, Elsevier, Amsterdam (2019).
Y. Zhang, High-Entropy Materials, Springer Nature, Singapore (2019)
K. A. Osintsev, V. E. Gromov, S. V. Konovalov, Yu. F. Ivanov, and I. A. Panchenko, Izv. vuzov. Chernaya metallurgiya, 64, No. 4, 249‒258 (2021); https://doi.org/10.17073/0368-0797-2021-4-249-258.
V. E. Gromov, Yu. A. Rubannikova, S. V. Konovalov, K. A. Osintsev, and S. V. Vorob’ev, Izv. vuzov. Chernaya metallurgiya, 64, No. 8, 599–605 (2021); https://doi.org/10.17073/0368-0797-2021-8-599-605.
V. K. Soni and A. K. Sinha, Trans. Indian Inst. Met., 76, 897–914 (2023); https://doi.org/10.1007/s12666-022-02777-1.
G. A. Salishchev, M. A. Tikhonovsky, D. G. Shaysultanov, N. D. Stepanov, A. V. Kuznetsov, I. V. Kolodiy, A. S. Tortika, and O. N. J. Senkov, J. Alloys Compd., 591, 11–21 (2014); https://doi.org/10.1016/j.jallcom.2013.12.210.
J. M. Zhu, H. F. Zhang, H. M. Fu, A. M. Wang, H. Li, and Z. Q. Hu, J. Alloys Compd., 497, No. 1-2, 52–56 (2010); https://doi.org/10.1016/j.jallcom.2010.03.074.
J. M. Zhu, H. M. Fu, H. F. Zhang, A. M. Wang, H. Li, and Z. Q. Hu, J. Alloys Compd., 509, No. 8, 3476–3480 (2011); https://doi.org/10.1016/j.jallc om. 2010.10. 047.
R. Li, W. Zhang, Y. Zhang, and P. K. Liaw, Mater. Sci. Eng. A., 725, 138 (2018); https://doi.org/10.1016/j.msea.2018.04.007.
J. Joseph, P. Hodgson, T. Jarvis, X. Wu, N. Stanford, and D. M. Fabijanic, Mater. Sci. Eng. A, 733, 59–70 (2018).
Q. Chao, J. Joseph, M. Annasamy, P. Hodgson, M. R. Barnett, and D. Fabijanic, J. Alloys Compd., 976, 173002 (2024); https://doi.org/10.1016/j.jallcom.2023.173002.
L. J. Zhang, M. D. Zhang, Z. Zhou, J. T. Fan, P. Cui, P. F. Yu, Q. Jing, M. Z. Ma, P. K. Liaw, G. Li, and R. P. Liu, Mater. Sci. Eng. A, 725, 437 (2018); https://doi.org/10.1016/j.msea.2018.04.058.
C. Ai, F. He, M. Guo, J. Zhou, Z. Wang, Z. Yuan, Y. Guo, Y. Liu, and L. J. Liu, J. Alloys Compd., 735, 2653 (2018); https://doi.org/10.1016/j.jallcom.2017.12.015.
T. Nagase, T. Kakeshita, K. Matsumura, K. Nakazawa, S. Furuya, N. Ozoe, and K. Yoshino, Mater. Design, 184, (2019); https://doi.org/10.1016/j.matdes.2019.108172.
A. S. Rogachev, Phys. Met. Metallogr., 121, No. 8, 733–764 (2020).
N. P. Lyakishev, ed., Binary Phase Diagrams of Metal Systems: Manual [in Russian], in 3 vol., Vol. 1, Mashinostroenie, Moscow (1996).
N. P. Lyakishev, ed., Binary Phase Diagrams of Metal Systems: Manual [in Russian], in 3 vol., Vol. 2, Mashinostroenie, Moscow (1997).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ivanov, Y.F., Gromov, V.E., Litovchenko, I.Y. et al. Structure, Phase Composition and Defect Substructure of High-Entropy Alloy Ribbon. Russ Phys J 67, 34–40 (2024). https://doi.org/10.1007/s11182-024-03085-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-024-03085-5