Abstract
Hot-dip aluminizing method and subsequent interdiffusion treatment were used to develop a TiAl3 coating on Ti–45Al–2Cr–2Nb–0.15B (at.%) alloy. A two-phase coating consisting of an outer pure Al layer and an inner TiAl3 layer formed on the alloy after the hot-dip and then a single phase TiAl3 coating was obtained by using interdiffusion treatment. Oxidation of the TiAl3 coating was conducted at 900 and 1000 °C. Both the interrupt oxidation and the isothermal oxidation tests indicated that the coating provided high protectiveness for the alloy. The coating was stable for at least 300 h during the interrupt oxidation at 900 and 1000 °C, and it was stable for at least 500 h at 1000 °C and 1000 h at 900 °C during the isothermal oxidation. The oxidation behavior of the coating was discussed in detail.
Similar content being viewed by others
References
Y. W. Kim and D. M. Dimiduk, JOM. The Journal of the Minerals, Metals, and Materials Society 43, 40 (1991).
Y. W. Kim, Intermetallics 6, 623 (1998).
H. Clemens and H. Kestler, Advanced Engineering Materials 2, 551 (2000).
A. Bartels, H. Kestler, and H. Clemens, Materials Science and Engineering A329, 153 (2002).
M. Schütze, M. HaId, C. Lang, S. Melsheimer, and A. Rahmel, Pure and Applied Chemistry 69, 2335 (1997).
K. Maki, M. Shioda, and M. Sayashi, Materials Science and Engineering A153, 591 (1992).
V. Shemet, A. K. Tyagi, J. S. Becker, P. Lersch, L. Singheiser, and W. J. Quadakkers, Oxidation of Metals 54, 211 (2000).
B. G. Kim, G. M. Kim, and C. J. Kim, Scripta Metallurgica et Materialia 33, 1117 (1995).
Y. Shida and H. Anada, Oxidation of Metals 45, 197 (1996).
S. Taniguchi, Y. Tachikawa, and T. Shibata, Materials Science and Engineering A 232, 47 (1997).
M. R. Yang and S. K. Wu, Materials Chemistry and Physics 65, 144 (2000).
V. Gauthier, F. Dettenwanger, M. Schutze, V. Shemet, and W. J. Quadakkers, Oxidation of Metals 59, 233 (2003).
T. C. Munro and B. Gleeson, Metallurgical and Materials Transactions A 27, 3761 (1996).
T. Nishimoto, T. Izumi, S. Hayashi, and T. Narita, Intermetallics 11, 459 (2003).
G. Moskal, Journal of Achievements in Materials and Manufacturing Engineering 20, 263 (2007).
Z. L. Tang, F. H. Wang, and W. T. Wu, Surface and Coatings Technology 110, 57 (1998).
Z. L. Tang, F. H. Wang, and W. T. Wu, Oxidation of Metals 48, 511 (1997).
Z. L. Tang, F. H. Wang, and W. T. Wu, Surface and Coatings Technology 99, 248 (1998).
M. S. Chu and S. K. Wu, Acta Materialia 51, 3109 (2003).
Y. J. Xi, F. H. Wang, and L. L. He, Journal of Materials Science and Technology 20, 724 (2004).
M. S. Chu and S. K. Wu, Oxidation of Metals 63, 1 (2005).
M. P. Brady, W. J. Brindley, J. L. Smialek, and I. E. Locci, JOM. The Journal of the Minerals, Metals, and Materials Society 48, 46 (1996).
M. Ueda, D. Susukida, S. Konda, and T. Ohtsuka, Surface and Coatings Technology 176, 202 (2004).
M. Sujata, S. Bhargava, and S. Sangal, ISIJ International 36, 255 (1996).
M. Sujata, S. Bhargava, and S. Sangal, Journal of Materials Science Letters 16, 1175 (1997).
M. Sujata, S. Bhargava, S. Suwas, and S. Sangal, Journal of Materials Science Letters 20, 2207 (2001).
T. B. Massalski, Binary Alloys Phase Diagrams, 2nd edn. (ASM International, The Materials Information Society, OH, USA, 1996).
V. I. Dybkov, Defect and Diffusion Forum 194, 1503 (2001).
F. J. J. Van Loo and G. D. Rieck, Acta Metallurgica 21, 61 (1973).
S. Wöhlert and R. Bormann, Journal of Applied Physics 85, 825 (1999).
C. Lang and M. Schutze, Microscopy of Oxidation 3, 265 (1997).
H. Hindam and D. P. Whittle, Oxidation of Metals 18, 245 (1982).
M. W. Brumm and H. J. Grabke, Corrosion Science 33, 1677 (1992).
H. J. Grabke, Materials Science Forum 251, 149 (1997).
J. L. Smialek, Corrosion Science 35, 1199 (1993).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, Z.G., Teng, X., Mao, Y.L. et al. Improvement of Oxidation Resistance of γ-TiAl at 900 and 1000 °C Through Hot-dip Aluminizing. Oxid Met 73, 455–466 (2010). https://doi.org/10.1007/s11085-009-9187-5
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11085-009-9187-5