Skip to main content
SpringerLink
Log in

Modeling the Yield Surface of a Composite Medium Made from Rigid-Plastic Materials Using Piecewise Quadratic Yield Criteria the Case of a Symmetric Plane Reinforcement 2. The Case of a Symmetric Plane Reinforcement

  • Published:
Mechanics of Composite Materials Aims and scope

A special case of the structural model of a hybrid composite multidirectional-reinforced in the plane was considered, which makes it possible to calculate the yield curve of a composite in the space of principal averageв stresses in a plane stress state (PSS). The composite contains an even number of reinforcing fiber families, which are divided into pairs of families. In each pair of the families, the fibers are made of the same material and are laid symmetrically with respect to the directions of principal stresses in the composite. The constituents of the reinforced composite are isotropic and have different tensile–compressive yield strengths. The mechanical behavior of composition constituents was described by the associated flow rule of an ideal rigid-plastic body with piecewise quadratic and piecewise linear yield curves in the space of principal stresses. The influence of approximation parameters of yield curves of composition constituents in the principal stresses and reinforcement parameters on the shape and dimensions of the yield curves of compositions was studied. It was demonstrated that the plastic flow in a fibrous medium is associated with the calculated yield curves of compositions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.

Similar content being viewed by others

Notes

  1. In the present paper, for the convenience of presentation, the same notation as in [1] is used, and the continuous numbering of the formulas started in [1] is retained.

References

  1. A. P. Yankovskii, “Modeling the yield surface of a composite made from rigid-plastic materials using piecewise quadratic yield criteria. 1. The general case of a plane cross reinforcement,” Mech. Compos. Mater., 59, No. 5, 945-958 (2023).

    Article  Google Scholar 

  2. T. P. Romanova and A. P. Yankovskii, “Piecewise-linear yield loci of angle-ply reinforced medium of different-resisting rigid-plastic materials at 2D stress state,” Mech. Solids, 55, No. 8, 1235-1252 (2020).

    Article  Google Scholar 

  3. T. P. Romanova and A. P. Yankovskii, “Structural model for rigid-plastic yielding behavior of angle-ply reinforced composites of materials with different properties in tension and compression considering 2D stress state in all constituents,” Mech. Adv. Mater. and Struct., 28, No. 20, 2151-2162 (2021).

    Article  CAS  Google Scholar 

  4. N. A. Abrosimov and V. G. Bazhenov, Nonlinear Problems of the Dynamics of Composite Structures [in Russian], Publishing House of UNN, Nizhny Novgorod (2002).

  5. V. V. Vasiliev and E. Morozov, Advanced Mechanics of Composite Materials and Structural Elements, Elsever, Amsterdam (2013).

    Google Scholar 

  6. Yu. S. Solomonov and V. P. Georgievsky, A. Ya. Nedbai, and V. A. Andryushin, Applied Problems of the Mechanics of Composite Cylindrical Shells [in Russian], Fizmatlit, Moscow (2014).

  7. R. F. Gibson, Principles of Composite Material Mechanics, 4rd ed, CRC Press, Taylor & Francis Group, Boca Raton (2015).

  8. A. A. Jahangirov, “Load-carrying capacity of a fiber-reinforced annular tree-layer composite plate clamped on its external and internal contours,” Mech. Compos. Mater., 52, No. 2, 271-280 (2016).

    Article  Google Scholar 

  9. V. D. Rud and V. Z. Midukov, “Experimental verification of hypotheses of plasticity of porous bodies,” Poroshk. Metallurgia, No. 1, 14-20 (1982).

  10. Composite Materials. Handbook, Ed. D. M. Karpinos [in Russian], Kyiv, Nauk. Dumka (1985).

  11. L. W. Hu, “Modified Tresks’s yield condition and associated flow rules for anisotropic materials and applications,” J. Franclin Inst., 265, No. 3, 187-204 (1958).

    Article  Google Scholar 

  12. A.-J. Wang and D. L. McDowell, “Yield surfaces of various periodic metal honeycombs at intermediate relative density,” Int. J. Plasticity, 21, 285-320 (2005).

    Article  Google Scholar 

  13. A. A. Samarskii, The Theory of Difference Schemes, Marcel Dekker Inc., New York (2001).

    Book  Google Scholar 

  14. T. P. Romanova and A. P. Yankovskii, “Constructing yield loci for rigid-plastic reinforced plates considering the 2D stress state in fibers,” Mech. Compos. Mater., 54, No. 6, 697-718 (2019).

    Article  Google Scholar 

  15. D. Kolarov, A. Baltov, and N. Boncheva, Mechanics of Plastic Media [in Russian], Mir, Moscow (1979).

  16. Composite Materials: Handbook, Eds. V. V. Vasiliev and Yu. M. Tarnopolskii. [in Russian], Mashinostroenie, Moscow (1990).

  17. A. K. Malmeister, V. P. Tamuzh, and G. A. Teters, Resistance of Polymeric and Composite Materials [in Russian], Zinatne, Riga (1980).

  18. A. G. Kurosh, Course of Higher Algebra [in Russian], Fizmatgiz, Moscow (1959).

Download references

Acknowledgment

This work was carried out within the framework of a State assignment (State registration No. 121030900260-6).

Author information

Authors and Affiliations

  1. Khristianovich Institute of Theoretical and Applied Mechanics, the. SB RAS, Novosibirsk, Russia

    P. Yankovskii

Authors
  1. P. Yankovskii
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to P. Yankovskii.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yankovskii, P. Modeling the Yield Surface of a Composite Medium Made from Rigid-Plastic Materials Using Piecewise Quadratic Yield Criteria the Case of a Symmetric Plane Reinforcement 2. The Case of a Symmetric Plane Reinforcement. Mech Compos Mater 59, 1101–1108 (2024). https://doi.org/10.1007/s11029-023-10159-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11029-023-10159-x

Keywords

Search

Navigation