Abstract
Technological parameter measurement is considered for complicated engineering, and an effective method is provided for reducing the dispersion of the technological measurements by designing the parameters of the technological line to reduce the sensitivity of the measurements to sources of deviation.
Similar content being viewed by others
References
M. A. Zemel’man, Metrological Principles of Technical Measurements [in Russian], Izd. Standartov, Moscow (1991).
GOST 8.395-80, The State System of Measurements. Normal Measurement Conditions for Checking. General Specifications [in Russian].
S. B. Danilevich, Izmer. Tekh., No. 8, 16 (2003).
Intergovernmental Recommendations RMG 29-99: Basic Terms and Definitions [in Russian].
Everything on Quality: Foreign Experience [in Russian], NTK Trek, Moscow (1999).
MI 2177-91, Measurements and Measurement Monitoring. Information on Measurement Errors in Design and Technological Documentation [in Russian].
A. Yu. Shishkin, Kompetentnost’, No. 10(27), 20 (2005).
GOST R ISO 5725-2002, Accuracy (Correctness and Precision) of Methods and Measurement Results [in Russian].
Author information
Authors and Affiliations
Additional information
__________
Translated from Izmeritel’naya Tekhnika, No. 2, pp. 14–18, February, 2007.
Rights and permissions
About this article
Cite this article
Shishkin, A.Y. A statistically planned experiment as a method of designing the parameters at technological measurements. Meas Tech 50, 119–124 (2007). https://doi.org/10.1007/s11018-007-0034-2
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11018-007-0034-2