Skip to main content
SpringerLink
Log in

Finite Element Analysis of Equivalent Mechanical Properties of Alloy-Reinforced Bi-2223 Composite Tapes

  • Original Paper
  • Published:
Journal of Superconductivity and Novel Magnetism Aims and scope Submit manuscript

Abstract

The alloy-reinforced Bi-2223 composite tapes can be used to realize high-magnetic field magnets, and its equivalent mechanical properties are important because of the great stress during the manufacturing and operation of magnets. Since the alloy-reinforced Bi-2223 tape has a complex structure, suitable analytical methods and equivalent models are necessary. The analysis of the equivalent mechanical properties is achieved by the mixture rule method and finite element simulation of simplified models. By using different simplified models, it is found that the single-filament elliptical model reduced computation time at most compared with the multi-filaments model, while the deviation from the experimental results is the minimum. It also shows that the details of the geometry in the models have little effect on the results. The results of the mixture rule method also agree with the experimental results, demonstrating that using the mixture rule method and simulation method of a single-filament elliptical model for mechanical analysis of alloy-reinforced Bi-2223 tapes is feasible.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Creely, A., Greenwald, M., Ballinger, S.: Overview of the SPARC tokamak. J. Plasma Phys. 86(5), 865860502 (2020)

    Article  CAS  Google Scholar 

  2. Uglietti, D.: A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors. Supercond. Sci. Technol. 32, 053001 (2019)

    Article  CAS  ADS  Google Scholar 

  3. Pierluigi, B., Walter, H.F., Joseph, V.M.: High temperature superconductors for fusion magnets. Nucl. Fusion 58, 103001 (2018)

    Article  Google Scholar 

  4. Takeda, Y., Suetomi, Y., Nakai, U.: Development of a persistent current mode 9.39 T (400 MHz) LTS/Bi-2223 NMR magnet with a Bi-2223 superconducting joint. IEEE Trans. Appl. Supercond. 32(6), 4301005 (2022)

  5. Yi, L., Stefan, R.: Key designs of a short-bore and cryogen-free high temperature superconducting magnet system for 14 T whole-body MRI. Supercond. Sci. Technol. 34, 125005 (2021)

    Article  Google Scholar 

  6. Yaohui, W., Qiuliang, W., Jianhua, L., Junsheng, C., Feng, L.: Insert magnet and shim coils design for a 27 T nuclear magnetic resonance spectrometer with hybrid high and low temperature superconductors. Supercond. Sci. Technol. 33, 064004 (2020)

    Article  Google Scholar 

  7. You-He, Z., Dongkeun, P., Yukikazu, I.: Review of progress and challenges of key mechanical issues in high-field superconducting magnets. Natl. Sci. Rev. 10(3), nwad001 (2023)

    Article  Google Scholar 

  8. Hahn, S., Kim, K., Kim, K., Xinbo, H., Thomas, P., Lain, D.: 45.5-tesla direct-current magnetic field generated with a high-temperature superconducting magnet. Nature 570, 496–499 (2019)

    Article  CAS  PubMed  ADS  Google Scholar 

  9. Xinbo, H., Michael, S., Kwanglok, K., Kwangmin, K., Kabindra, B., Anatolii, P.: Analyses of the plastic deformation of coated conductors deconstructed from ultra-high field test coils. Supercond. Sci. Technol. 33, 095012 (2020)

    Article  Google Scholar 

  10. Tatsunori, O., Daichi, K., Kohei, S., Satoshi, A., Masashi, K., Takeshi, K.: Mechanical and critical current characteristics of high-strength Bi2Sr2Ca2Cu3O10+δ multi-filamentary tapes reinforced with thicker Ni-alloy laminations with various pre-tensions. Supercond. Sci. Technol. 36, 014002 (2023)

    Article  Google Scholar 

  11. Tatsunori, O., Kohei, S., Satoshi, A.: Mechanical and critical current characteristics of high-strength (Bi, Pb) 2Sr2Ca2Cu3O10+δ tapes under uniaxial tensile strain. Supercond. Sci. Technol. 34, 025017 (2021)

    Article  Google Scholar 

  12. Kozo, O., Shutaro, M., Takuro, K., Stefanus, H., Takeshi, K., Shinichi, K., Goro, O.: Mechanical—electromagnetic property of stainless sheet laminated BSCCO–2223 wires. Mater. Res. Express. 6, 026001 (2019)

    Google Scholar 

  13. Zhaoxia, Z., Qiang, S., Xiaofan, G.: Influence of the movement of the neutral axis on the relation between the critical current and strain in bending Bi2223/Ag composite tapes. J. Supercond. Nov. Magn. 28, 3535–3543 (2015)

    Article  Google Scholar 

  14. Jiawu, Z., Yinian, P., Wenge, C., Yunfei, T., Futang, W., Zhuomin, C.: Mechanical behavior analysis of model coil for the 40-T hybrid magnet superconducting outsert. IEEE Trans. Appl. Supercond. 20(3), 628–631 (2010)

    Article  Google Scholar 

  15. Jiangbo, C., Xiaohua, J.: Stress Analysis of a 7 T actively shielded superconducting magnet for animal MRI. IEEE Trans. Appl. Supercond. 22(3), 4903104 (2012)

    Article  Google Scholar 

  16. Kozo, O., Michinaka, S., Kaname, M.: Mechanical property and its influence on the critical current of Ag/Bi2223 tapes. Supercond. Sci. Technol. 16, 971–975 (2003)

    Article  Google Scholar 

  17. Xiaofan, G., Xinxin, Z.: Characterization of the elastic properties of Bi2223/Ag/Ag alloy composite tapes by the generalized self-consistent approach. J. Supercond. Nov. Magn. 26, 2115–2119 (2013)

    Article  Google Scholar 

  18. Liyuan, L., Wei, C., Haiyang, Z., Chengshan, L., Qinbing, H., Xinsheng, Y., Yong, Z.: Experimental and numerical analysis of equivalent elastic properties for Bi-2212 and YBCO conductors. J. Supercond. Nov. Magn. 30, 885–891 (2017)

    Article  Google Scholar 

  19. Sun, W., Tzeng, J.T.: Effective mechanical properties of EM composite conductors: an analytical and finite element modeling approach. Compos. Struct. 58, 411–421 (2002)

    Article  Google Scholar 

  20. Goro, O., Kohei, Y., Takayoshi, N., Takuro, K., Shinichi, K., Takeshi, K.: Ni alloy laminated high strength Bi-2223 wire. SEI. Tech. Rev. 84, 15–21 (2017)

    Google Scholar 

  21. Nakashima, T., Kobayashi, S., Kagiyama, T., Yamazaki, K., Kikuchi, M., Yamade, S.: Overview of the recent performance of DI-BSCCO wire. Cryogenics 52(12), 713–718 (2012)

    Article  CAS  ADS  Google Scholar 

  22. Kato, T., Kobayashi, S., Yamazaki, K., Ohkura, K., Ueyama, M., Ayai, N.: Development of high performance Ag sheathed Bi2223 wire. Phys. C. 412(part-P2), 1066–1072 (2004)

  23. Sugano, M., Osamura, K.: Stress-strain behavior and degradation of critical current of Bi2223 composite tapes. Phys. C. 402(2), 341–346 (2004)

    Article  CAS  ADS  Google Scholar 

  24. Adam, M.I., Ishimoto, M., Sugano, M., Osamura, K.: Comparative tensile strain analysis on Bi-2223 composite superconducting tapes. Phys. C. 426–431(part-P2), 1181–1187 (2005)

  25. Julien, M., Hulbert, G.M.: Dependence of the dynamic properties of Voigt and Reuss composites on the Poisson’s ratios and bulk loss factors of the constituent materials. J. Compos. Mater. 47(26), 3237–3247 (2012)

    Google Scholar 

Download references

Funding

This work was supported by the National MCF Energy R&D Program (2022YFE03150102) and Sichuan Science and Technology Program (2023YFH0009).

Author information

Authors and Affiliations

  1. Southwestern Institute of Physics, Chengdu, 610041, China

    Run Wu, Xinbo Hu, Jian Liu, Yunpeng Zhu & Lijun Cai

  2. School of Automation, Chengdu University of Information Technology, Chengdu, 610225, China

    Liyuan Liu

  3. Superconductivity and New Energy R&D Center, Southwest Jiaotong University, Chengdu, 610031, China

    Xinsheng Yang

Authors
  1. Run Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Liyuan Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Xinbo Hu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Xinsheng Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Jian Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Yunpeng Zhu
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Lijun Cai
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Lijun Cai.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wu, R., Liu, L., Hu, X. et al. Finite Element Analysis of Equivalent Mechanical Properties of Alloy-Reinforced Bi-2223 Composite Tapes. J Supercond Nov Magn 37, 31–39 (2024). https://doi.org/10.1007/s10948-023-06665-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10948-023-06665-7

Keywords

Search

Navigation