Skip to main content

Advertisement

SpringerLink
Log in

Through-thickness thermal conduction in glass fiber polymer–matrix composites and its enhancement by composite modification

  • Original Paper
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Continuous glass fiber polymer–matrix composites are electrically insulating and used for printed wiring boards, but their thermal conductivity needs to be increased without sacrificing the electrical insulation ability. The through-thickness thermal conductivity of these epoxy–matrix composite laminates with in-plane fibers is found to be effectively modeled using the Rule of Mixtures with fibers and matrix mainly in parallel in the through-thickness direction, in contrast to the series model that is effective for previously studied carbon fiber composites. For the glass fiber composites, the through-thickness conductivity is similar to the in-plane conductivity. The conductivity for woven fiber composites is increased by up to 80 % by curing pressure increase (from 0.69 to 4.0 MPa), up to 50 % by solvent (toluene or ethanol) treatment of the prepreg for partial surface resin removal, and up to 90 % by boron nitride nanotube (BNNT) incorporation along with solvent treatment. The highest through-thickness thermal conductivity reached is 1.2 W/(m K), which is higher than those of all prior reports on glass fiber composites. The interlaminar interfaces are negligible in through-thickness thermal resistance compared to the laminae, as for previously studied carbon fiber composites. The fiber contribution dominates the lamina resistance. The fiber–fiber interface contribution to the lamina resistance decreases significantly with curing pressure increase or composite modification involving BNNT incorporation or solvent treatment of the prepreg.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Xu Y, Chung DDL (2000) Increasing the thermal conductivity of boron nitride and aluminum nitride particle epoxy–matrix composites by particle surface treatment. Compos Interfaces 7(4):243–256

    Article  Google Scholar 

  2. Zhang X, Lin Z, Li B, Tan S (2011) Improved thermal conductivity of composite particles filled epoxy resin. Adv Mater Res 217–218:439–444

    Google Scholar 

  3. He Y, Wu X, Chen Z (2011) Thermal conductivity of composite silicone rubber filled with graphite/silicone carbide. Adv Mater Res 221:382–388

    Article  Google Scholar 

  4. Zhou Y, Wang H, Xiang F, Zhang H, Yu K, Chen L (2011) A poly(vinylidene fluoride) composite with added self-passivated microaluminum and nanoaluminum particles for enhanced thermal conductivity. Appl Phys Lett 98(18):182906/1–182906/3

    Article  Google Scholar 

  5. Azar K, Graebner JE (1996) Experimental determination of thermal conductivity of printed wiring boards. In: Proceedings of the twelfth IEEE SEMI-THERM symposium, pp 169–182

  6. Diez-Pascual AM, Ashrafi B, Naffakh M, Gonzalez-Dominguez JM, Johnston A, Simard B, Martinez MT, Gomez-Fatou MA (2011) Influence of carbon nanotubes on the thermal, electrical and mechanical properties of poly(ether ether ketone)/glass fiber laminates. Carbon 49(8):2817–2833

    Article  Google Scholar 

  7. Kalaprasad G, Pradeep P, Mathew G, Pavithran C, Thomas S (2000) Thermal conductivity and thermal diffusivity analyses of low-density polyethylene composites reinforced with sisal, glass and intimately mixed sisal/glass fibers. Compos Sci Technol 60(16):2967–2977

    Article  Google Scholar 

  8. Wang S, Qiu J (2010) Enhancing thermal conductivity of glass fiber/polymer composites through carbon nanotubes incorporation. Compos B 41:533–536

    Article  Google Scholar 

  9. Ashrafi B, Diez-Pascual AM, Johnson L, Genest M, Hind S, Martinez-Rubi Y, Gonzalez-Dominguez JM, Martinez MT, Simard B, Gomez-Fatou MA, Johnston A (2012) Processing and properties of PEEK/glass fiber laminates: effect of addition of single-walled carbon nanotubes. Compos A 43:1267–1279

    Article  Google Scholar 

  10. Clark III RL, Skinner M, Farah B, Farris J, Hsiao K, Parker MR (2008) Thermal and electrical conductivities characterization of CNF-modified glass fiber/polyester composite. In: SAMPE conference proceedings, vol 53, pp 152/1–152/11

  11. Eihusen J, Peters AR (1999) Characterization of the transverse thermal conductivity of interplay hybrid composite laminates. In: 31st international SAMPE technical conference, pp. 211–220

  12. Zimmer M, Liang R, Wang B (2008) Thermal management of increasing through-thickness thermal conductivity of fiber-reinforced composites. In: Proceedings of the NATAS 36th annual conference on thermal analysis and applications, pp. 59/1–59/9

  13. Wan B, Yue K, Zheng L, Zhang X (2011) The effective thermal conductivity of composite materials with spherical dispersed phase. Adv Mater Res 239–242(Pt. 3):1870–1874

    Article  Google Scholar 

  14. Mercier S, Molinari A, El Mouden M (2000) Thermal conductivity of composite material with coated inclusions: applications to tetragonal array of spheroids. J Appl Phys 87(7):3511–3519

    Article  Google Scholar 

  15. Marcos-Gomez D, Ching-Lloyd J, Elizalde MR, Clegg WJ, Molina-Aldareguia JM (2010) Predicting the thermal conductivity of composite materials with imperfect interfaces. Compos Sci Technol 70(16):2276–2283

    Article  Google Scholar 

  16. Yue C, Zhang Y, Hu Z, Liu J, Cheng Z (2010) Modeling of the effective thermal conductivity of composite materials with FEM based on resistor networks approach. Microsyst Technol 16(4):633–639

    Article  Google Scholar 

  17. Holotescu S, Stoian FD (2009) Evaluation of the effective thermal conductivity of composite polymers by considering the filler size distribution law. J Zhejiang Univ Sci A 10(5):704–709

    Article  Google Scholar 

  18. Xu Y, Tanaka Y, Murata M, Kamihira K, Yamazaki M, Yagi K (2005) Effect of reinforcement nonuniformity on effective thermal conductivity of composite. Mater Trans 46(8):1786–1789

    Article  Google Scholar 

  19. Chung PW, Tamma KK, Namburu RR (2001) Homogenization of temperature-dependent thermal conductivity in composite materials. J Thermophys Heat Transf 15(1):10–17

    Article  Google Scholar 

  20. Hashin Z (1970) Theory of composite materials. In: Wendt FW, Liebowitz H, Perrone N (eds) Mechanics of composite materials. Pergamon, Oxford, pp 202–242

    Google Scholar 

  21. Lim T (2002) Unified practical bounds for the thermal conductivity of composite materials. Mater Lett 54:152–157

    Article  Google Scholar 

  22. Mutnuri B, Liang R, Ganga RH (2006) Thermal conductivity characterization of FRP composites: experimental. In: 64th Annual technical conference—society of plastics engineers, pp 143–147

  23. Han S, Chung DDL (2011) Increasing the through-thickness thermal conductivity of carbon fiber polymer–matrix composite by curing pressure increase and filler incorporation. Compos Sci Technol 71(16):1944–1952

    Article  Google Scholar 

  24. Zhi C, Bando Y, Tang C, Golberg D (2010) Boron nitride nanotubes. Mater Sci Eng R 70(3–6):92–111

    Article  Google Scholar 

  25. Kalay S, Yilmaz Z, Sen O, Emanet M, Kazanc E, Culha M (2015) Synthesis of boron nitride nanotubes and their applications, Beilstein. J. Nanotechnol 6:84–102

    Google Scholar 

  26. Chang CW, Han W, Zettl A (2005) Thermal conductivity of B-C–N and BN nanotubes. Appl Phys Lett 86(17):173102

    Article  Google Scholar 

  27. Ghazizadeh M, Estevez JE, Kelkar AD, Ryan JG (2014) Mechanical properties prediction of hydrogenated boron nitride nanotubes using molecular dynamic simulations. JSM Nanotechnol Nanomed 2(2):1030

    Google Scholar 

  28. Chung DDL (2010) Composite materials, 2nd edn. Springer, New York, pp 294–295

    Book  Google Scholar 

  29. Wilkes K, Dinwiddie R, Graves R (1996) Thermal conductivity, vol 23. CRC Press, Boca Raton, pp 604–607

    Google Scholar 

  30. Tang C, Bando Y, Liu C, Fan S, Zhang J, Ding X, Golberg D (2006) Thermal conductivity of nanostructured boron nitride materials. J Phys Chem B 110(21):10354–10357

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Composite Materials Research Laboratory, University at Buffalo, State University of New York, Buffalo, NY, 14260-4400, USA

    Yoshihiro Takizawa & D. D. L. Chung

Authors
  1. Yoshihiro Takizawa
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. D. D. L. Chung
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to D. D. L. Chung.

Ethics declarations

Conflict of Interest

The authors declare that they have no conflict of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Takizawa, Y., Chung, D.D.L. Through-thickness thermal conduction in glass fiber polymer–matrix composites and its enhancement by composite modification. J Mater Sci 51, 3463–3480 (2016). https://doi.org/10.1007/s10853-015-9665-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-015-9665-x

Keywords

Search

Navigation