Skip to main content
SpringerLink
Log in

Structure Design and Configuration Optimization of the Reconfigurable Deformed Tracked Wheel based on Terramechanics Characteristics

  • Regular paper
  • Published:
Journal of Intelligent & Robotic Systems Aims and scope Submit manuscript

Abstract

Wheeled locomotion mechanisms can traverse even terrains with high velocity, while tracked locomotion mechanisms can traverse rough terrains. Since different locomotion mechanisms are suitable for different terrains, there has always been a problem to choose appropriate modes according to terrains for all-terrain unmanned ground vehicles (UGVs). In order to make UGVs can traverse various terrains efficiently, based on the concept of mechanism reconfiguration, the reconfigurable deformable tracked wheel (RDTW) is proposed, which can realize wheeled mode and tracked mode. The mechanical design of RDTW is introduced, and the kinematic of reconfigurable rims is investigated. The nonlinear terramechanics model is established by coupling with the deformation parameter of reconfigurable mechanisms. Further, this model is validated by Multibody Dynamics-Discrete Element Method (MBD-DEM) co-simulation and experiments. Based on the theoretical model, the passing ability can be improved by changing the configuration of the mechanism. The simulation and test prove that the structural design of RDTW is reasonable and effective, and the optimal deformation strategy obtained from the terramechanics based on its structure is effective and can be applied in practice. The analysis results show that the nonlinear sinkage curves and traction performance of UGVs can be effectively improved by configuring RDTW. The proposed locomotion mechanism is an important attempt in improving the design of multi-locomotion-mode UGVs.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Data Availability

Data sharing is not applicable to this article as no datasets were generated or analysed during the current study.

References

  1. Zhang, F., Yu, Y., Wang, Q., et al.: A terrain-adaptive robot prototype designed for bumpy-surface exploration. Mech. Mach. Theory 141, 213–225 (2019). https://doi.org/10.1016/j.mechmachtheory.2019.07.008

    Article  Google Scholar 

  2. Moniruzzaman, M.D., et al.: High Latency Unmanned Ground Vehicle Teleoperation Enhancement by Presentation of Estimated Future through Video Transformation. J Intell Robot Syst 106, 1–27 (2022). https://doi.org/10.1007/s10846-022-01749-3

    Article  Google Scholar 

  3. Luigi Tagliavini, et al.:Wheeled Mobile Robots: State of the Art Overview and Kinematic Comparison Among Three Omnidirectional Locomotion Strategies. J Intell Robot Syst 106(57) (2022). https://doi-org-s.libyc.nudt.edu.cn:443/10.1007. Accessed 24 Oct 2022

  4. Qiao, G., Song, G., Zhang, Y., et al.: A Wheel-legged Robot with Active Waist Joint: Design, Analysis, and Experimental Results. J Intell Robot Syst 83, 485–502 (2016). https://doi.org/10.1007/s10846-015-0303-2

    Article  Google Scholar 

  5. Yang, P., Zhang, M., Sun, L. et al.: Design and Control of a Crawler-Type Wall-Climbing Robot System for Measuring Paint Film Thickness of Offshore Wind Turbine Tower. J Intell Robot Syst 106(50) (2022). https://doi-org-s.libyc.nudt.edu.cn:443/10.1007/s10846-022-01750-w. Accessed 13 Oct 2022

  6. Zhisheng, Yu.: Xia Qunsheng: Automobile Theory. Tsinghua University Press, Beijing (2018)

    Google Scholar 

  7. Tica, M., Barbaraci, G., Dobre, G., Virsi-Mariotti, G., Mateescu, V.: Study Of New Automotive Rear Suspension Mechanism. Balkan J. Mech. Transm. 1, 60–66 (2011)

    Google Scholar 

  8. Tica, M., Dobre, G., Barbaraci, G., Mariotti, G.V.: Optimal Damping Constant Investigation on a Quarter-Car. In: Dobre, G. (eds) Power Transmissions. Mech. Mach. Sci. 13:675–689 (2013). https://doi.org/10.1007/978-94-007-6558-0_55

  9. Sohal, S.S., Sebastian, B., Ben-Tzvi, P.: Autonomous Docking of Hybrid-Wheeled Modular Robots With an Integrated Active Genderless Docking Mechanism. J. Mech Robot Trans ASME. 14, 011010 (2022). https://doi.org/10.1115/1.4051519

    Article  Google Scholar 

  10. Kim, Y.-G., Jeong-Hwan, et al.: Autonomous terrain adaptation and user-friendly tele-operation of wheel-track hybrid mobile robot. Int. J. Precis. Eng. Manuf. 13, 1781–1788 (2012). https://doi.org/10.1007/s12541-012-0234-9

    Article  Google Scholar 

  11. Luo, Z., Shang, J., Wei, G., Lei, R.: A reconfigurable hybrid wheel-track mobile robot based on Watt II six-bar linkage. Mech. Mach. Theor. 128, 16–32 (2018). https://doi.org/10.1016/j.mechmachtheory.2018.04.020

    Article  Google Scholar 

  12. Wangshukun, Caoxiaojie, et al.: Design of multi adaptability wheel shoe compound load moving system. China Mech. Eng. 28, 1835–1841 (2017). https://doi.org/10.3969/j.issn.1004-132X.2017.15.011

    Article  Google Scholar 

  13. Osman, M.S.: The mechanics of soil cutting blades. J. Agric. Engr. Res. J. Terramech. 2, 98 (1965). https://doi.org/10.1016/0022-4898(65)90115-1

    Article  Google Scholar 

  14. Li, Z., Ma, S., Li, B. et al.: Design and basic experiments of a transformable wheel-track robot with self-adaptive mobile mechanism. 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems. 1334–1339 (2010). https://doi.org/10.1109/IROS.2010.5651151.

  15. Jing Leng, Ming Chen, Jianyu Xiao, et al.: Design and Dynamic Simulation of Wheel/Track Transform Mobile Device. ICRMA.18–22 (2020). https://doi.org/10.1109/ICMRA51221.2020.9398363.

  16. Dengqi, Cui, Xueshan, Gao, Wenzeng, Guo: Mechanism design and motion ability analysis for wheel/track mobile robot. Adv. Mech. Eng. 11, 1–13 (2016). https://doi.org/10.1177/1687814016679763

    Article  Google Scholar 

  17. Jie, Q., Weibin, Z.: Design and Obstacle-Surmounting Performance Analysis of Wheel-Track Transformable Wheel. J. South China University of Tech. (Natural Science Edition). 5, 119-124(2019). https://doi.org/10.3969/j.issn.1000-565X.2013.05.019.

  18. Irani, R.A., Bauer, R.J., Warkentin, A.: Dynamic Wheel-Soil Model for Lightweight Mobile Robots with Smooth Wheels. J Intell Robot Syst 71, 179–193 (2013). https://doi.org/10.1007/s10846-012-9777-3

    Article  Google Scholar 

  19. Keller, T., Trautner, A., Arvidsson, J.: Stress distribution and soil displacement under a rubber-tracked and a wheeled tractor during ploughing, both on-land and within furrows. Soil Tillage Res. 68, 39–47 (2002). https://doi.org/10.1016/S0167-1987(02)00082-X

    Article  Google Scholar 

  20. Yidong, B., Lingyu, S., Minglu, Z., et al.: Research progress in terramechanics of tracked robot. Mech. Design. 37, 1–13 (2020). https://doi.org/10.13841/j.cnki.jxsj.2020.10.001

    Article  Google Scholar 

  21. Huaiguang, Y., Liang, D., Haibo, G., et al.: Test and model study on in-situ steering settlement of planet car wheels. J. Mech. Eng. 53, 99–108 (2017). https://doi.org/10.3901/JME.2017.08.099

    Article  Google Scholar 

  22. Zheng, J., Gao, H., Yuan, B., et al.: Design and terramechanics analysis of a Mars rover utilising active suspension. Mech. Mach. Theory 128, 125–149 (2018). https://doi.org/10.1016/j.mechmachtheory.2018.05.002

    Article  Google Scholar 

  23. Bernstein, R.: Probleme zur experimentellen Motorpflugmechanik. Der Motorwagen 16, 199–206 (1913)

    Google Scholar 

  24. S. S. Saakyan: Vzaimodeistrie vedomogo kolesa i pochvi. (1959).

  25. Kacigin, V.V., Guskov, V.V.: The basis of tractor performance theory. Part 1-General laws of soil strength and deformation. J. Terramech. 5, 43–66 (1968). https://doi.org/10.1016/0022-4898(68)90080-3

    Article  Google Scholar 

  26. M. Bekker: Theory of Land Locomotion: Mechanics of Vehicle Mobility. University of Michigan Press. Michigan, USA, (1956).

  27. Reece, A.: R, Principles of Soil-Vehicle Mechanics. Proc Inst Mech Eng Automob Div 180, 45–66 (1965). https://doi.org/10.1243/PIME_AUTO_1965_180_009_02

    Article  Google Scholar 

  28. Onafeko, O., Reece, A.R.: Soil stresses and deformations beneath rigid wheels. J. Terramech. 4, 59–80 (1967). https://doi.org/10.1016/0022-4898(67)90104-8

    Article  Google Scholar 

  29. Youssef, A.-F.A., Ali, G.A.: Determination of soil parameters using plate test. J. Terramech. 19, 129–147 (1982). https://doi.org/10.1016/0022-4898(82)90016-7

    Article  Google Scholar 

  30. Wong, J.Y., Reece, A.R.: Prediction of rigid wheel performance based on the analysis of soil-wheel stresses part I. Performance of driven rigid wheels. J. Terramech. 4, 64–65 (1967). https://doi.org/10.1016/0022-4898(67)90105-x

    Article  Google Scholar 

  31. Wong, J.Y., Reece, A.R.: Prediction of rigid wheel performance based on the analysis of soil-wheel stresses: Part II. Performance of towed rigid wheels. J. Terramech. 4, 7–25 (1967). https://doi.org/10.1016/0022-4898(67)90047-x

    Article  Google Scholar 

  32. Meirion-Griffith, G., Spenko, M.: A modified pressure–sinkage model for small, rigid wheels on deformable terrains. J. Terramech. 48, 149–155 (2011). https://doi.org/10.1016/j.jterra.2011.01.001

    Article  Google Scholar 

  33. Meirion-Griffith, G., Spenko, M.: A pressure-sinkage model for small-diameter wheels on compactive, deformable terrain. J. Terramech. 50, 37–44 (2013). https://doi.org/10.1016/j.jterra.2012.05.003

    Article  Google Scholar 

  34. Wong, J., Preston-Thomas, J.: On the characterization of the shear stress-displacement relationship of terrain. J. Terramech. 19(225–234), 225–234 (1983). https://doi.org/10.1016/0022-4898(83)90028-9

    Article  Google Scholar 

  35. du Plessis, H.L.M., Yu, T.: Modelling the traction of a prototype track based on soil–rubber friction and adhesion. J. Terramech. 43, 487–504 (2006). https://doi.org/10.1016/j.jterra.2005.07.002

    Article  Google Scholar 

  36. Liu, Y.: Characteristics of Desert Environment and Its Influence on Engineering Equipment. Equip. Environ. Eng. 6, 67–71 (2013)

    Google Scholar 

  37. van Wyk, J.D., Spoelstra, J., et al.: Mathematical modelling of the interaction between a tracked vehicle and the terrain. Appl. Math. Model. 20, 838–846 (1996). https://doi.org/10.1016/s0307-904x(96)00090-x

    Article  MATH  Google Scholar 

  38. Wang, W., Yan, Z., Du, Z.: Experimental study of a tracked mobile robot’s mobility performance. J. Terramech. 77, 75–84 (2018). https://doi.org/10.1016/j.jterra.2018.03.004

    Article  Google Scholar 

  39. Rahman, A., Yahya, A., Bardaie, M.Z., et al.: Design and development of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. Int. J. Heavy Veh. Syst. 12, 239–267 (2005). https://doi.org/10.1504/IJHVS.2005.008028

    Article  Google Scholar 

  40. Terzaghi, K.: Theoretical soil mechanics. J. Wiley and Sons, inc 2300 (2007). https://doi.org/10.1002/9780470172766.fmatter

  41. Rahman, A., Yahya, A.: Performance investigation of an advanced tracked prime mover on the low bearing soil. J. Terramech. 50, 233–244 (2013). https://doi.org/10.1016/j.jterra.2013.06.001

    Article  Google Scholar 

  42. Nan, Z., Shuang, Z., He, X., et al. Evaluation of vehicle-track-bridge interacted system for the continuous CRTS-II non-ballast track slab. Science China(Technological Sciences). 10,17–23 (2014). https://doi.org/10.1007/s11431-014-5637-7

  43. Okello, J.A., Dwyer, M.J., Cottrell, F.B.: The Tractive Performance of Rubber Tracks and a Tractor Driving Wheel Tyre as Influenced by Design Parameters. J. Agric. Eng. Res. 59, 33–43 (1994). https://doi.org/10.1006/jaer.1994.1062

    Article  Google Scholar 

  44. Cundall, P.A., Strack, O.: Discussion: A discrete numerical model for granular assemblies. Géotechnique 30, 331–336 (1980). https://doi.org/10.1680/geot.1980.30.3.331

    Article  Google Scholar 

  45. Li, H., Guoming, H., et al.: Analysis and optimization of operating parameters of ball mills using discrete element method simulation. Eng. J. Wuhan Univ. 43, 762–765 (2010)

    Google Scholar 

  46. Hertz, B.H.: On the contact of elastic solids. J. Reine und angewandte Mathematik 92, 156–172 (1882)

    Article  MATH  Google Scholar 

  47. Mindlin, R.D.: Compliance of Elastic Bodies in Contact. J. Appl. Mech. 16, 259–268 (1949). https://doi.org/10.1007/978-1-4613-8865-4_24

    Article  MathSciNet  MATH  Google Scholar 

  48. Mindlin, R.D., Deresiewicz, H.: Elastic Spheres in Contact Under Varying Oblique Forces. J. Appl. Mech. 20, 327–344 (1953). https://doi.org/10.1007/978-1-4613-8865-4_35

    Article  MathSciNet  MATH  Google Scholar 

  49. Sakaguchi, H., Ozaki, E., Igarashi, T.: Plugging of the Flow of Granular Materials during the Discharge from a Silo. Int. J. Modern Phys. B. 7, 1949–1963 (1993). https://doi.org/10.1142/S0217979293002705

    Article  Google Scholar 

  50. Sweijen, T., Hassanizadeh, S.M., Aslannejad, H., et al.: The effect of particle shape on porosity of swelling granular materials: Discrete element method and the multi-sphere approximation. Powder Tech. 360, 1295–1304 (2020). https://doi.org/10.1016/j.powtec.2019.09.036

    Article  Google Scholar 

  51. Cheng, Hu., Jingwei, G., Xiaobo, S., et al.: Analytical modeling and DEM analysis of soil-wheel interaction under cornering and skidding conditions in off-road vehicles. AIP Adv. 11, 1–16 (2021). https://doi.org/10.1063/5.0057046

    Article  Google Scholar 

  52. Zhao, C., Zang, M.: Analysis of rigid tire traction performance on a sandy soil by 3D finite element-discrete element method. J. Terramech. 55, 29–37 (2014). https://doi.org/10.1016/j.jterra.2014.05.005

    Article  Google Scholar 

  53. Yujie, W.: The Analysis of the Interaction between Wheel and Sotf Ground Based on DEM. Jilin University. (2012).

Download references

Acknowledgements

This research was supported by National Natural Science Foundation of China Youth Fund (Grant No.52202485), Natural Science Foundation of Hunan Province (Grant No. 2022JJ30664) and Hunan Postgraduate Innovation Training Project (Grant No.CX20220041).

Funding

This research was supported by National Natural Science Foundation of China Youth Fund (Grant No.52202485), Natural Science Foundation of Hunan Province (Grant No. 2022JJ30664) and Hunan Postgraduate Innovation Training Project (Grant No.CX20220041).

Author information

Authors and Affiliations

  1. College of Intelligence Science and Technology, National University of Defence Technology, Changsha, 410073, China

    Yuanjiang Tang, Xiaojun Xu, Lei Zhang, Guanpeng Chen, Kai Luo & Lihao Yan

Authors
  1. Yuanjiang Tang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Xiaojun Xu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Lei Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Guanpeng Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Kai Luo
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Lihao Yan
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

Yuanjiang Tang contributed to conceptualization, methodology, validation, investigation, writing—original draft, and writing—review and editing. Xiaojun Xu performed conceptualization and investigation. Lei Zhang performed validation, software and data curation. Guanpeng Chen performed writing—review and editing. Kai Luo performed visualization. Lihao Yan data curation. All authors read and approved the final manuscript.

Corresponding authors

Correspondence to Yuanjiang Tang or Lei Zhang.

Ethics declarations

Ethics Approval

This manuscript does not involve research on humans and/or animals.

Consent to Participate

This paper does not involve human participants and animals.

Consent for Publication

This paper does not contain materials, figures, tables, etc. that have been published anywhere else. Therefore consent for publication is not applicable.

Conflict of Interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tang, Y., Xu, X., Zhang, L. et al. Structure Design and Configuration Optimization of the Reconfigurable Deformed Tracked Wheel based on Terramechanics Characteristics. J Intell Robot Syst 108, 7 (2023). https://doi.org/10.1007/s10846-023-01874-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10846-023-01874-7

Keywords

Search

Navigation