Abstract
New types of polyamides containing pendent triaryl pyridine groups were successfully synthesized by direct polycondensation of a symmetry diamine, (4-(4-(2,6-diphenylpyridin-4yl)phenoxy)phenyl)-3,5-diaminobezamide (DPDAB), and various aromatic and aliphatic dicarboxylic diacids in NMP using triphenyl phosphate (TPP) and pyridine as catalyst. The diamine and all the prepared polyamides were fully characterized by using FT-IR, 1H-NMR, UV-Vis spectroscopy, fluorimetry and elemental analysis. The inherent viscosity of polyamides ranged from 0.45 dL/g to 0.68 dL/g. All the polymers exhibited solubility in common polar aprotic solvents such as NMP, DMAc, DMF, DMSO, pyridine, HMPA, and even in less polar solvents such as THF and m-cresol at room temperature. Thermal properties of polyamides were evaluated by means of DSC, DMTA and TGA. These polymers showed glass transition temperatures (Tg) in the range of 138–210°C. Their initial decomposition temperature (Ti) varied from 265°C to 310°C under N2. The dilute solution (0.2 g/dL) of polyamides in DMF exhibited fluorescence emission with λmax in the range of 470–550 nm.
Similar content being viewed by others
References
Yang, H.H., “Aromatic high-strength fibers”, Wiley, New York, 1989, p. 10
Cassidy, P.E., “Thermally stable polymers”, Marcel Dekker, New York Inc, 1980, p. 27
Frazer, A.H., “High temperature resistant polymers”, Wiley, New York, 1968, p. 17
Culbertson, B.M. and Pittman, C.U., “New Monomers and Polymers”, Plenum Press, New York, 1984, p. 22
Patil, P.S., Pal, R.R., Salunkhe, M.M., Maldar, N.N. and Wadgaonkar, P.P., Eur. Polym. J., 2007, 43: 5047
Shao, Y., Li, Y., Zhao, X., Ma, T., Gong C. and Yang, F., Eur. Polym. J. 2007, 43: 4389
Liaw, D.J., Wang, K.L., Pundlik Pujari, S., Huang, Y.C., Tao, B.C., Chen, M.H., Lee, K.R. and Lai, J.Y., Dyes Pigments, 2009, 82: 109
Ghaemy, M. and Alizadeh, R., Eur. Polym. J., 2009, 45: 1681
Ebadi, H. and Mehdipour-Ataei, S., Chinese J. Polym. Sci., 2010, 28(1): 29
Imai, Y., Malder, N.N. and Kakimoto, M., J. Polym. Sci. Part A: 1984, 22: 2189
Bruma, M., Mercer, F., Fitch, J. and Cassidy, P., J. Appl. Polym. Sci., 1995, 56: 527
Eastmond, G.C., Gibas, M. and Paprotny, J., Eur. Polym. J., 1999, 35: 2097
Hsiao, S.H. and Dai, L.R., J. Polym. Sci. Part A: 1999, 37: 665
Faghihi, K., Shabanian, M. and Izadkhah, A., Chinese J. Polym. Sci., 2010, 28(4): 589
Mallakpour, S. and Khani, M., Chinese J. Polym. Sci., 2010, 28(6): 859
Mallakpour, S., and Dinari, M., Chinese J. Polym. Sci., 2010, 28(5): 685
Kusama, M., Mastsumoto, T. and Kurosaki, T., Macromolecules, 1994, 27: 1117
Liaw, D.J., Chen, W.H., Hu, C.K., Lee, K.R. and Lai, J.Y., Polymer, 2007, 48: 6571
Liou, G.S., Fang, Y.K. and Yen, H.J., J. Polym. Res., 2007, 14: 147
Ghaemy, M. and Barghamadi, M., J. Appl. Polym. Sci., 2009, 114: 3464
Li, F., Fang, S, Ge, J.J., Honigfort, P.S., Chen, J.C., Harris, F.W. and Cheng, S.Z.D., Polymer, 1999, 40: 4571
Liaw, D.J., Chang, F.C., Leung, M.K., Chou, M.Y. and Muellen, K., Macromolecules, 2005, 38: 4024
Mallakpour, S. and Kolahdoozan, M., React. Funct Polymers, 2008, 68: 91
Liaw, D.J. and Liaw, B.Y., Polymer, 2001, 42: 839
Ghaemy, M. and Barghamadi, M., J. Appl. Polym. Sci., 2009, 111: 1588
Myung, B.Y., Ahn, C.J. and Yoon, T.H., Polymer, 2004, 45: 3185
Yamazaki, N., Matsumoto, M. and Higashi, F., J. Polym. Sci. Part A, 1975, 13: 1373
Ghaemy, M. and Alizadeh, R., Eur. Polym. J., 2009, 45: 3108
Ghaemy, M., Behmadi, H. and Alizadeh, R., Chinese Chem. Lett., 2009, 20: 961
Mighani, H. and Ghaemy, M., Chinese J. Polym. Sci., 2010, 28(2): 147
Liaw, D.J., Liaw, B.Y. and Jeng, M.Q., Polymer, 1998, 39: 1597
Mallakpour, S. and Taghavi, M., Polymer, 2008, 49: 3239
Yagci, H. and Mathias, L.J., Polymer, 1998, 39: 3779
San-José, N., Gómez-Valdemoro, A., Estevez, P., García, F.C., Serna, F. and José Miguel García J. M. Eur. Polym. J., 2008, 44: 3578
Liou, G.S. and Chang, C.W., Macromolecules, 2008, 41: 1667
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ghaemy, M., Khajeh, S. Synthesis and characterization of polyamides derived from (4-(4-(2, 6-diphenylpyridin-4yl)phenoxy)phenyl)-3, 5-diaminobezamide. Chin J Polym Sci 30, 82–92 (2012). https://doi.org/10.1007/s10118-012-1105-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10118-012-1105-7