Abstract
The morphology of granular materials, such as sands, is of significant importance due to the effect of grain shape on their physical, mechanical, and hydraulic behavior. As technology has progressed from visual identification to modern computer-based techniques, numerous methods have been developed for quantifying grain shapes, many of which utilize digital image analysis and advances in computational techniques. A comprehensive understanding of available shape characterization methods is essential to make better use of these tools. This paper presents a state-of-the-art review of current methods for characterizing the morphology of granular materials, focusing particularly on digital image analysis techniques. It critically evaluates two essential aspects of shape characterization: the acquisition of particle shape information and shape measurement methods, discussing the strengths and limitations of each approach. Further, the application of grain shape characterization to analyze the effect of particle shape on the macro-scale behavior of sand is discussed. The review emphasizes the need to shift from classical shape characterizations developed by sedimentologists to objective-oriented shape characterizations that enable micro-to-macro correlations, taking into account the availability of robust tools and technologies.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Abràmoff MD, Magalhães PJ, Ram SJ (2004) Image Processing with ImageJ Biophotonics Int 11:36–42
Adamidis O, Alber S, Anastasopoulos I (2020) Assessment of three-dimensional printing of granular media for geotechnical applications. Geotech Test J. https://doi.org/10.1520/GTJ20180259
Ahmed SS, Martinez A (2021) Triaxial compression behavior of 3D printed and natural sands. Granul Matter 23:1–21. https://doi.org/10.1007/s10035-021-01143-0
Ahmed SS, Martinez A (2022) Effects of particle shape on the shear wave velocity and shear modulus of 3d printed sand analogs. Open Geomech 3:1–18. https://doi.org/10.5802/ogeo.9
Akbulut S (2002) Fractal dimensioning of sand grains using image analysis system. Pamukkale U J Eng Sci 8:329–334
Alam MF, Haque A (2017) A new cluster analysis-marker-controlled watershed method for separating particles of granular soils. Materials 10:1195. https://doi.org/10.3390/ma10101195
Alam MF, Haque A, Ranjith PG (2018) A study of the particle-level fabric and morphology of granular soils under one-dimensional compression using insitu X-ray CT imaging. Materials 11:919. https://doi.org/10.3390/ma11060919
Al-Raoush R, Alshibli KA (2006) Distribution of local void ratio in porous media systems from 3D X-ray microtomography images. Physica A Stat Mech Appl 361:441–456. https://doi.org/10.1016/j.physa.2005.05.043
Al-Rousan T, Masad E, Tutumluer E, Pan T (2007) Evaluation of image analysis techniques for quantifying aggregate shape characteristics. Constr Build Mater 21:978–990. https://doi.org/10.1016/j.conbuildmat.2006.03.005
Alshibli KA, Alsaleh MI (2004) Characterizing surface roughness and shape of sands using digital microscopy. J Comput Civ Eng 18:36–45. https://doi.org/10.1061/(ASCE)0887-3801(2004)18:1(36)
Alshibli KA, Druckrey AM, Al-Raoush RI, Weiskittel T, Lavrik NV (2015) Quantifying morphology of sands using 3D imaging. J Mater Civ Eng 27:1–10. https://doi.org/10.1061/(ASCE)0887-3801(2004)18:1(36)
Altuhafi FN, Coop MR (2011) Changes to particle characteristics associated with the compression of sands. Géotechnique 61:459–471. https://doi.org/10.1680/geot.9.P.114
Altuhafi F, O’Sullivan C, Cavarretta I (2013) Analysis of an image-based method to quantify the size and shape of sand particles. J Geotech Geoenviron Eng 139:1290–1307. https://doi.org/10.1061/(asce)gt.1943-5606.0000855
Altuhafi FN, Coop MR, Georgiannou VN (2016) Effect of particle shape on the mechanical behavior of natural sands. J Geotech Geoenviron Eng 142:1–15. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001569
Andò E, Viggiani G, Hall SA, Desrues J (2013) Experimental micro-mechanics of granular media studied by X-ray tomography: recent results and challenges. Géotech Lett 3:142–146. https://doi.org/10.1680/geolett.13.00036
Anochie-Boateng JK, Komba JJ, Mvelase GM (2013) Three-dimensional laser scanning technique to quantify aggregate and ballast shape properties. Constr Build Mater 43:389–398. https://doi.org/10.1016/j.conbuildmat.2013.02.062
Arasan S, Akbulut S, Hasiloglu AS (2011a) The relationship between the fractal dimension and shape properties of particles. KSCE J Civ Eng 15:1219–1225. https://doi.org/10.1007/s12205-011-1310-x
Arasan S, Yenera E, Hattatoglu F, Hinislioglua S, Akbulut S (2011b) Correlation between shape of aggregate and mechanical properties of asphalt concrete: Digital image processing approach. Road Mater Pavement Des 12:239–262. https://doi.org/10.1080/14680629.2011.9695245
Asahina D, Taylor MA (2011) Geometry of irregular particles: Direct surface measurements by 3-D laser scanner. Powder Technol 213:70–78. https://doi.org/10.1016/j.powtec.2011.07.008
Aschenbrenner BC (1956) A new method of expressing particle sphericity. J Sediment Res 26:15–31. https://doi.org/10.1306/74D704A7-2B21-11D7-8648000102C1865D
Ashmawy AK, Hoang VV, Sukumaran B (2003) Evaluating the influence of particle shape on liquefaction behavior using discrete element modeling. The Thirteenth International Offshore and Polar Engineering Conference, Honolulu, Hawai, USA
ASTM D6913/D6913M-17 (2017) Standard test methods for particle-size distribution (gradation) of soils using sieve analysis. ASTM International, West Conshohocken, PA
Bagheri GH, Bonadonna C, Manzella I, Vonlanthen P (2015) On the characterization of size and shape of irregular particles. Powder Technol 270:141–153. https://doi.org/10.1016/j.powtec.2014.10.015
Barksdale RD, Itani SY (1989) Influence of aggregate shape on base behavior. Transp Res Rec 1227:173–182
Barrett PJ (1980) The shape of rock particles, a critical review. Sedimentology 27:291–303. https://doi.org/10.1111/j.1365-3091.1980.tb01179.x
Blott SJ, Pye K (2008) Particle shape: a review and new methods of characterization and classification. Sedimentology 55:31–63. https://doi.org/10.1111/j.1365-3091.2007.00892.x
Bowman ET, Soga K, Drummond W (2001) Particle shape characterisation using Fourier descriptor analysis. Geotechnique 51:545–554. https://doi.org/10.1680/geot.2001.51.6.545
Brechbühler C, Gerig G, Kübler O (1995) Parametrization of closed surfaces for 3-D shape description. Comput vis Image Underst 61:154–170. https://doi.org/10.1006/cviu.1995.1013
British Standards Institute 2016 (2016) Methods of Test for Soils for Civil Engineering Purposes. General Requirements and Sample Preparation. BS 1377-1:2016. London: British Standards Institute
Brown DJ, Vickers GT (1998) The use of projected area distribution functions in particle shape measurement. Powder Technol 98:250–257. https://doi.org/10.1016/S0032-5910(98)00066-7
Bullard JW, Garboczi EJ (2013) Defining shape measures for 3D star-shaped particles: Sphericity, roundness, and dimensions. Powder Technol 249:241–252. https://doi.org/10.1016/j.powtec.2013.08.015
Cailleux A (1947) L’indice d’e´mousse´ des grains de sable et gre`s. Rev Ge´omorph Dyn 3:78–87
Cavarretta I, O’Sullivan C, Coop MR (2009) Applying 2D shape analysis techniques to granular materials with 3D particle geometries. In: Proceedings of 6th International conference on the micromechanics of granular media. Golden, CO, pp 833–836. https://doi.org/10.1063/1.3180057
Cavarretta I, Coop M, O’Sullivan C (2010) The influence of particle characteristics on the behaviour of coarse grained soils. Géotechnique 60:413–423. https://doi.org/10.1680/geot.2010.60.6.413
Cepuritis R, Garboczi EJ, Jacobsen S (2017a) Three dimensional shape analysis of concrete aggregate fines produced by VSI crushing. Powder Technol 308:410–421. https://doi.org/10.1016/j.powtec.2016.12.020
Cepuritis R, Garboczi EJ, Jacobsen S, Snyder KA (2017b) Comparison of 2-D and 3-D shape analysis of concrete aggregate fines from VSI crushing. Powder Technol 309:110–125. https://doi.org/10.1016/j.powtec.2016.12.037
Chen S, Yang X, You Z, Wang M (2016) Innovation of aggregate angularity characterization using gradient approach based upon the traditional and modified Sobel operation. Constr Build Mater 120:442–449. https://doi.org/10.1016/j.conbuildmat.2016.05.120
Cho GC, Dodds J, Santamarina JC (2006) Particle shape effects on packing density, stiffness, and strength: natural and crushed sands. J Geotech Geoenviron Eng 132:591–602. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:5(591)
Clark MW (1981) Quantitative shape analysis: a review. J Int Assoc Math Geol 13:303–320
Clarke KC (1986) Computation of the fractal dimension of topographic surfaces using the triangular prism surface area method. Comput Geosci 12:713–722. https://doi.org/10.1016/0098-3004(86)90047-6
Corey AT (1949) Influence of shape on the fall velocity of sand grains. Dissertation, Colorado A & M College
Cox EP (1927) A method of assigning numerical and percentage values to the degree of roundness of sand grains. J Paleontol 1:179–183
Das N (2007) Modeling three-dimensional shape of sand grains using discrete element method. Dissertation, University of South Florida
Dobkins JE, Folk RL (1970) Shape development on Tahiti-Nui. J Sediment Res 40:1167–1203. https://doi.org/10.1306/74D72162-2B21-11D7-8648000102C1865D
Druckrey AM, Alshibli KA (2016) 3D finite element modeling of sand particle fracture based on in situ X-Ray synchrotron imaging. Int J Numer Anal Methods Geomech 40:105–116. https://doi.org/10.1002/nag.2396
Druckrey AM, Alshibli KA, Al-Raoush RI (2016) 3D characterization of sand particle-to-particle contact and morphology. Comput Geotech 74:26–35. https://doi.org/10.1016/j.compgeo.2015.12.014
Ehrlich R, Weinberg B (1970) An exact method for characterization of grain shape. J Sediment Res 40:205–212. https://doi.org/10.1306/74D71F1E-2B21-11D7-8648000102C1865D
Erdoğan ST, Forster AM, Stutzman PE, Garboczi EJ (2017) Particle-based characterization of Ottawa sand: shape, size, mineralogy, and elastic moduli. Cem Concr Compos 83:36–44. https://doi.org/10.1016/j.cemconcomp.2017.07.003
Faessel M, Jeulin D (2010) Segmentation of 3D microtomographic images of granular materials with the stochastic watershed. J Microsc 239:17–31. https://doi.org/10.1111/j.1365-2818.2009.03349.x
Fernlund JM (2005) Image analysis method for determining 3-D size distribution of coarse aggregates. Bull Eng Geol Environ 64(2):159–166. https://doi.org/10.1007/s10064-004-0251-8
Fletcher T, Chandan C, Masad E, Sivakumar K (2003) Aggregate imaging system for characterizing the shape of fine and coarse aggregates. Transp Res Rec 1832:67–77. https://doi.org/10.3141/1832-09
Fonseca J, O’Sullivan C, Coop MR, Lee PD (2012) Non-invasive characterization of particle morphology of natural sands. Soils Found 52:712–722. https://doi.org/10.1016/j.sandf.2012.07.011
Garboczi EJ (2002) Three-dimensional mathematical analysis of particle shape using X-ray tomography and spherical harmonics: Application to aggregates used in concrete. Cem Concr Res 32:1621–1638. https://doi.org/10.1016/S0008-8846(02)00836-0
Garboczi EJ (2011) Three dimensional shape analysis of JSC-1A simulated lunar regolith particles. Powder Technol 207:96–103. https://doi.org/10.1016/j.powtec.2010.10.014
Garboczi EJ, Bullard JW (2017) 3D analytical mathematical models of random star-shape particles via a combination of X-ray computed microtomography and spherical harmonic analysis. Adv Powder Technol 28:325–339. https://doi.org/10.1016/j.apt.2016.10.014
Garcia X, Akanji LT, Blunt MJ, Matthai SK, Latham JP (2009) Numerical study of the effects of particle shape and polydispersity on permeability. Phys Rev E 80:021304. https://doi.org/10.1103/PhysRevE.80.021304
Ghalib AM, Hryciw RD (1999) Soil particle size distribution by mosaic imaging and watershed analysis. J Comput Civ Eng 13:80–87. https://doi.org/10.1061/(ASCE)0887-3801(1999)13:2(80)
Grigoriu M, Garboczi E, Kafali C (2006) Spherical harmonic-based random fields for aggregates used in concrete. Powder Technol 166(3):123–138. https://doi.org/10.1016/j.powtec.2006.03.026
Guida G, Viggiani GM, Casini F (2020) Multi-scale morphological descriptors from the fractal analysis of particle contour. Acta Geotech 15:1067–1080. https://doi.org/10.1007/s11440-019-00772-3
Hanaor DAH, Gan Y, Revay M, Airey DW, Einav I (2016) 3D printable geomaterials. Géotechnique 66:323–332. https://doi.org/10.1680/jgeot.15.P.034
Hayakawa Y, Oguchi T (2005) Evaluation of gravel sphericity and roundness based on surface-area measurement with a laser scanner. Comput Geosci 31:735–741. https://doi.org/10.1016/j.cageo.2005.01.004
Hryciw RD, Zheng J, Shetler K (2016) Particle roundness and sphericity from images of assemblies by chart estimates and computer methods. J Geotech Geoenviron Eng 142:1–15. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001485
Hyslip JP, Vallejo LE (1997) Fractal analysis of the roughness and size distribution of granular materials. Eng Geol 48:231–244. https://doi.org/10.1016/S0013-7952(97)00046-X
International Organization for Standardization (2009) Soil Quality – Determination of Particle Size Distribution in Mineral Soil Material – Method by Sieving and Sedimentation. ISO 11277:2009. Geneva, Switzerland: International Organization for Standardization
Janke NC (1966) Effect of shape upon the settling velocity of regular convex geometric particles. J Sediment Res 36:370–376. https://doi.org/10.1306/74D714C4-2B21-11D7-8648000102C1865D
Janoo VC (1998) Quantification of shape, angularity, and surface texture of base course materials. US Army Corps of Engineers Cold Regions Research and Engineering Laboratory, Hanover, NH, Special Report 98:1–22
Jennings BR, Parslow K (1988) Particle size measurement: the equivalent spherical diameter. Proc Roy Soc London A Math Phys Sci 419:137–149. https://doi.org/10.1098/rspa.1988.0100
Jerves AX, Kawamoto RY, Andrade JE (2016) Effects of grain morphology on critical state: a computational analysis. Acta Geotech 11:493–503. https://doi.org/10.1007/s11440-015-0422-8
Jia X, Garboczi EJ (2016) Advances in shape measurement in the digital world. Particuology 26:19–31. https://doi.org/10.1016/j.partic.2015.12.005
Katagiri J, Matsushima T, Yamada Y (2010) Statistics on 3D particle shapes of lunar soil (No. 60501) obtained by micro x-ray CT and its image-based DEM simulation. In Earth and Space 2010: Engineering, Science, Construction, and Operations in Challenging Environments, pp 254–259
Katagiri J, Matsushima T, Yamada Y, Tsuchiyama A, Nakano T, Uesugi K, Ohtake M, Saiki K (2015) Investigation of 3D grain shape characteristics of lunar soil retrieved in Apollo 16 using image-based discrete-element modeling. J Aerosp Eng 28:04014092. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000421
Kato Y, Nakata Y, Hyodo M, Murata H (2001) One-dimensional compression properties of crushable soils related to particle characteristics. In: Proceedings of 14th Southeast Asian Geotechnical Conf., Geotechnical Engineering Meeting Society’s Meet, Thailand, pp 527–532
Kaye BH (1989) A random walk through fractal dimensions. John Wiley & Sons
Khan R, Latha GM (2023) Multi-scale understanding of sand-geosynthetic interface shear response through Micro-CT and shear band analysis. Geotext Geomembr. https://doi.org/10.1016/j.geotexmem.2023.01.006
Kim H, Haas CT, Rauch AF, Browne C (2002) Dimensional ratios for stone aggregates from three-dimensional laser scans. J Comput Civ Eng 16:175–183. https://doi.org/10.1061/(ASCE)0887-3801(2002)16:3(175)
Kim Y, Ma J, Lim SY, Song JY, Yun TS (2022) Determination of shape parameters of sands: a deep learning approach. Acta Geotech 17:1521–1531. https://doi.org/10.1007/s11440-022-01464-1
Kong D, Fonseca J (2018) Quantification of the morphology of shelly carbonate sands using 3D images. Géotechnique 68:249–261. https://doi.org/10.1680/jgeot.16.P.278
Krumbein WC, Pettijohn FJ (1938) Manual of sedimentary petrography. D Appleton-Century Company Inc, New York
Krumbein WC (1941) Measurement and geological significance of shape and roundness of sedimentary particles. J Sediment Res 11:64–72. https://doi.org/10.1306/D42690F3-2B26-11D7-8648000102C1865D
Krumbein WC, Sloss LL (1951) Stratigraphy and sedimentation. W.H. Freeman and Company, San Francisco
Kuenen PH (1956) Experimental abrasion of pebbles: 2. Rolling by Current J Geol 64:336–368. https://doi.org/10.1086/626370
Kuo CY, Frost JD, Lai JS, Wang LB (1996) Three-dimensional image analysis of aggregate particles from orthogonal projections. Transp Res Rec 1526:98–103. https://doi.org/10.1177/0361198196152600112
Kuo CY, Rollings RS, Lynch LN (1998) Morphological study of coarse aggregates using image analysis. J Mater Civ Eng 10:135–142. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:3(135)
Kutay ME, Ozturk HI, Abbas AR, Hu C (2011) Comparison of 2D and 3D image-based aggregate morphological indices. Int J Pavement Eng 12:421–431. https://doi.org/10.1080/10298436.2011.575137
Kwan AK, Mora CF, Chan HC (1999) Particle shape analysis of coarse aggregate using digital image processing. Cem Concr Res 29:1403–1410. https://doi.org/10.1016/S0008-8846(99)00105-2
Lai Z, Chen Q (2019) Reconstructing granular particles from X-ray computed tomography using the TWS machine learning tool and the level set method. Acta Geotech 14:1–18. https://doi.org/10.1007/s11440-018-0759-x
Lakkimsetti B, Latha GM (2022) Morphological Perspectives to Quantify and Mitigate Liquefaction in Sands. Indian Geotech J 52:1244–1252. https://doi.org/10.1007/s40098-022-00649-5
Lakkimsetti B, Gali ML (2023) Grain Shape Effects on the Liquefaction Response of Geotextile-Reinforced Sands. Int J Geosynth Ground Eng 9:1–17. https://doi.org/10.1007/s40891-023-00434-1
Lanaro F, Tolppanen P (2002) 3D characterization of coarse aggregates. Eng Geol 65:17–30. https://doi.org/10.1016/S0013-7952(01)00133-8
Lee SJ, Lee CH, Shin M, Bhattacharya S, Su YF (2019) Influence of coarse aggregate angularity on the mechanical performance of cement-based materials. Constr Build Mater 204:184–192. https://doi.org/10.1016/j.conbuildmat.2019.01.135
Lees G (1964) A new method for determining the angularity of particles. Sedimentology 3:2–21. https://doi.org/10.1111/j.1365-3091.1964.tb00271.x
Li L, Iskander M (2019) Evaluation of dynamic image analysis for characterizing granular soils. Geotech Test J 43:1149–1173. https://doi.org/10.1520/GTJ20190137
Li L, Iskander M (2021) Comparison of 2D and 3D dynamic image analysis for characterization of natural sands. Eng Geol 290:1–14. https://doi.org/10.1016/j.enggeo.2021.106052
Li L, Beemer RD, Iskander M (2021) Granulometry of two marine calcareous sands. J Geotech Geoenviron Eng 147:1–19. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002431
Li L, Sun Q, Iskander M (2022) Efficacy of 3D dynamic image analysis for characterising the morphology of natural sands. Géotechnique 1–14. https://doi.org/10.1680/jgeot.21.00128
Liang Z, Nie Z, An A, Gong J, Wang X (2019) A particle shape extraction and evaluation method using a deep convolutional neural network and digital image processing. Powder Technol 353:156–170. https://doi.org/10.1016/j.powtec.2019.05.025
Lin CL, Miller JD (2005) 3D characterization and analysis of particle shape using X-ray microtomography (XMT). Powder Technol 154:61–69. https://doi.org/10.1016/j.powtec.2005.04.031
Liu X, Garboczi EJ, Grigoriu M, Lu Y, Erdoğan ST (2011) Spherical harmonic-based random fields based on real particle 3D data: improved numerical algorithm and quantitative comparison to real particles. Powder Technol 207(1–3):78–86. https://doi.org/10.1016/j.powtec.2010.10.012
Machairas N, Li L, Iskander M (2020) Application of dynamic image analysis to sand particle classification using deep learning. In Geo-Congress 2020: Modeling, Geomaterials, and Site Characterization, pp 612–621. https://doi.org/10.1061/9780784482803.065
Maerz NH, Lusher M (2001) Measurement of flat and elongation of coarse aggregate using digital image processing. 80th Annual Meeting. Transportation Research Board, Washington DC, pp 2–14
Maerz NH (2004) Technical and computational aspects of the measurement of aggregate shape by digital image analysis. J Comput Civ Eng 18:10–18. https://doi.org/10.1061/(ASCE)0887-3801(2004)18:1(10)
Mahmoud E, Gates L, Masad E, Erdoğan S, Garboczi E (2010) Comprehensive evaluation of AIMS texture, angularity, and dimension measurements. J Mater Civ Eng 22:369–379. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000033
Mandelbrot BB (1977) Fractals: Form, chance and dimension. Freeman, San Francisco
Mandelbrot BB (1983) The fractal geometry of nature. Freeman, San Francisco
Mandelbrot BB, Passoja D, Paullay AJ (1984) Fractal character of fracture surfaces of metals. Nature 308:721–722
Maroof MA, Mahboubi A, Noorzad A, Safi Y (2020) A new approach to particle shape classification of granular materials. Transp Geotech 22:1–13. https://doi.org/10.1016/j.trgeo.2019.100296
Masad E, Button JW (2000) Unified imaging approach for measuring aggregate angularity and texture. Comput Aided Civ Infrastruct Eng 15:273–280. https://doi.org/10.1111/0885-9507.00191
Masad E, Olcott D, White T, Tashman L (2001) Correlation of fine aggregate imaging shape indices with asphalt mixture performance. Transp Res Rec 1757:148–156. https://doi.org/10.3141/1757-17
Masad E, Saadeh S, Al-Rousan T, Garboczi E, Little D (2005) Computations of particle surface characteristics using optical and X-ray CT images. Comput Mater Sci 34:406–424. https://doi.org/10.1016/j.commatsci.2005.01.010
Matsushima T, Katagiri J, Uesugi K, Tsuchiyama A, Nakano T (2009) 3D shape characterization and image-based DEM simulation of the lunar soil simulant FJS-1. J Aerosp Eng 22:15–23. https://doi.org/10.1061/(ASCE)0893-1321(2009)22:1(15)
Meininger RC (1998) Aggregate Tests Related to Performance of Portland Cement Concrete Pavement. National Cooperative Highway Research Program Project 4-20A, Final Report
Miura K, Maeda K, Furukawa M, Toki S (1997) Physical characteristics of sands with different primary properties. Soils Found 37:53–64. https://doi.org/10.3208/sandf.37.3_53
Mollon G, Zhao J (2012) Fourier–Voronoi-based generation of realistic samples for discrete modelling of granular materials. Granul Matter 14:621–638. https://doi.org/10.1007/s10035-012-0356-x
Mollon G, Zhao J (2013) Generating realistic 3D sand particles using Fourier descriptors. Granul Matter 15:95–108. https://doi.org/10.1007/s10035-012-0380-x
Mollon G, Zhao J (2014) 3D generation of realistic granular samples based on random fields theory and Fourier shape descriptors. Comput Methods Appl Mech Eng 279:46–65. https://doi.org/10.1016/j.cma.2014.06.022
Mora CF, Kwan AKH (2000) Sphericity, shape factor, and convexity measurement of coarse aggregate for concrete using digital image processing. Cem Concr Res 30:351–358. https://doi.org/10.1016/S0008-8846(99)00259-8
Nadimi S, Fonseca J (2017) Single-grain virtualization for contact behavior analysis on sand. J Geotech Geoenviron Eng 143:1–10. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001740
Nie Z, Liang Z, Wang X (2018a) A three-dimensional particle roundness evaluation method. Granul Matter 20:1–11. https://doi.org/10.1007/s10035-018-0802-5
Nie Z, Wang X, Liang Z, Gong J (2018b) Quantitative analysis of the three-dimensional roundness of granular particles. Powder Technol 336:584–593. https://doi.org/10.1016/j.powtec.2018.06.020
Nie Z, Fang C, Gong J, Liang Z (2020) DEM study on the effect of roundness on the shear behaviour of granular materials. Comput Geotech 121:103457. https://doi.org/10.1016/j.compgeo.2020.103457
Ohm HS, Hryciw RD (2013) Translucent segregation table test for sand and gravel particle size distribution. Geotech Test J 36:592–605. https://doi.org/10.1520/gtj20120221
Ohm HS, Hryciw RD (2014) Size distribution of coarse-grained soil by sedimaging. J Geotech Geoenviron Eng 140:1–9. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001075
Otsu N (1979) A threshold selection method from gray level histograms. IEEE Trans. Systems, Man, and Cybernetics 9:62–66
Ouhbi N, Voivret C, Perrin G, Roux JN (2016) Railway ballast: grain shape characterization to study its influence on the mechanical behaviour. Procedia Eng 143:1120–1127. https://doi.org/10.1016/j.proeng.2016.06.150
Paixão A, Resende R, Fortunato E (2018) Photogrammetry for digital reconstruction of railway ballast particles–A cost-efficient method. Constr Build Mater 191:963–976. https://doi.org/10.1016/j.conbuildmat.2018.10.048
Pentland A (1927) A method of measuring the angularity of sands. Roy Soc Canada Proc Trans 21(3):43
Pettijohn FJ, Potter PE, Siever R (1972) Sand and Sandstone. Springer-Verlag, Berlin
Pillai AG, Gali ML (2022) Role of particle shape on the shear strength of sand-GCL interfaces under dry and wet conditions. Geotext Geomembr 50(2):262–281. https://doi.org/10.1016/j.geotexmem.2021.11.004
Pillai AG, Gali ML (2023) Engineering benefits of replacing natural sand with manufactured sand in landfill construction. Sci Rep 13:6444. https://doi.org/10.1038/s41598-023-32835-7
Powers MC (1953) A new roundness scale for sedimentary particles. J Sediment Res 23:117–119. https://doi.org/10.1306/D4269567-2B26-11D7-8648000102C1865D
Rao C, Tutumluer E (2000) Determination of volume of aggregates: new image-analysis approach. Transp Res Rec 1721:73–80. https://doi.org/10.3141/1721-09
Rao C, Tutumluer E, Kim IT (2002) Quantification of coarse aggregate angularity based on image analysis. Transp Res Rec 1787:117–124. https://doi.org/10.3141/1787-13
Schneider C, Rasband W., Eliceiri K. (2012) NIH Image to ImageJ: 25 years of image analysis. Nature Forum 9(7): 671–675.
Riley NA (1941) Projection Sphericity J Sediment Res 11:94–95. https://doi.org/10.1306/D426910C-2B26-11D7-8648000102C1865D
Rodriguez JM (2013) Importance of the particle shape on mechanical properties of soil materials. Dissertation, Luleå University of Technology
Rorato R, Arroyo M, Andò E, Gens A (2019) Sphericity measures of sand grains. Eng Geol 254:43–53. https://doi.org/10.1016/j.enggeo.2019.04.006
Santamarina JC, Cho GC (2004) Soil behaviour: The role of particle shape. In: Advances in geotechnical engineering: The Skempton conference, Thomas Telford Publishing, pp 604–617
Shi Y, Yan WM (2015) Segmentation of irregular porous particles of various sizes from X-ray microfocus computer tomography images using a novel adaptive watershed approach. Géotech Lett 5:299–305. https://doi.org/10.1680/jgele.15.00100
Sneed ED, Folk RL (1958) Pebbles in the lower Colorado River, Texas: a study in particle morphogenesis. J Geol 66:114–150. https://doi.org/10.1086/626490
Sochan A, Zieliński P, Bieganowski A (2015) Selection of shape parameters that differentiate sand grains, based on the automatic analysis of two-dimensional images. Sediment Geol 327:14–20. https://doi.org/10.1016/j.sedgeo.2015.07.007
Stock SR (2008) Recent advances in X-ray microtomography applied to materials. Int Mater Rev 53:129–181. https://doi.org/10.1179/174328008X277803
Su D, Yan WM (2018a) 3D characterization of general-shape sand particles using microfocus X-ray computed tomography and spherical harmonic functions, and particle regeneration using multivariate random vector. Powder Technol 323:8–23. https://doi.org/10.1016/j.powtec.2017.09.030
Su D, Yan WM (2018b) Quantification of angularity of general-shape particles by using Fourier series and a gradient-based approach. Constr Build Mater 161:547–554. https://doi.org/10.1016/j.conbuildmat.2017.12.004
Su D, Yan WM (2020) Prediction of 3D size and shape descriptors of irregular granular particles from projected 2D images. Acta Geotech 15:1533–1555. https://doi.org/10.1007/s11440-019-00845-3
Su D, Wang X, Wang X (2020) An in-depth comparative study of three-dimensional angularity indices of general-shape particles based on spherical harmonic reconstruction. Powder Technol 364:1009–1024. https://doi.org/10.1016/j.powtec.2019.10.019
Suh HS, Kim KY, Lee J, Yun TS (2017) Quantification of bulk form and angularity of particle with correlation of shear strength and packing density in sands. Eng Geol 220:256–265. https://doi.org/10.1016/j.enggeo.2017.02.015
Sukumaran B, Ashmawy AK (2001) Quantitative characterisation of the geometry of discrete particles. Geotechnique 51:619–627. https://doi.org/10.1680/geot.2001.51.7.619
Sun Y, Indraratna B, Nimbalkar S (2014) Three-dimensional characterisation of particle size and shape for ballast. Géotech Lett 4:197–202. https://doi.org/10.1680/geolett.14.00036
Sun Q, Zheng J, Li C (2019a) Improved watershed analysis for segmenting contacting particles of coarse granular soils in volumetric images. Powder Technol 356:295–303. https://doi.org/10.1016/j.powtec.2019.08.028
Sun Q, Zheng J, Coop MR, Altuhafi FN (2019b) Minimum image quality for reliable optical characterizations of soil particle shapes. Comput Geotech 114:1–6. https://doi.org/10.1016/j.compgeo.2019.103110
Sun Q, Zheng Y, Li B, Zheng J, Wang Z (2019c) Three-dimensional particle size and shape characterisation using structural light. Géotech Lett 9:72–78. https://doi.org/10.1680/jgele.18.00207
Sun Y, Cai Z, Fu J (2019d) Particle morphomics by high-throughput dynamic image analysis. Sci Rep 9:1–11. https://doi.org/10.1038/s41598-019-46062-6
Sun Q, Zheng J (2021) Realistic soil particle generation based on limited morphological information by probability-based spherical harmonics. Comput Part Mech 8:215–235. https://doi.org/10.1007/s40571-020-00325-6
Swan B (1974) Measures of particle roundness; a note. J Sediment Res 44:572–577. https://doi.org/10.1306/74D72A90-2B21-11D7-8648000102C1865D
Sympatec (2008) Windox - operating instructions release 5.4.1.0, Sympatec, Clausthal-Zellerfeld, Germany
Tafesse S, Fernlund JMR, Bergholm F, Arvidsson M (2008) New method for 3-D size measurements of particles using image analysis. In: The 33rd International Geological Congress, Oslo, Norway
Tafesse S, Fernlund JMR, Bergholm F (2012) Digital sieving-Matlab based 3-D image analysis. Eng Geol 137:74–84. https://doi.org/10.1016/j.enggeo.2012.04.001
Tafesse S, Fernlund JMR, Sun W, Bergholm F (2013) Evaluation of image analysis methods used for quantification of particle angularity. Sedimentology 60:1100–1110. https://doi.org/10.1111/j.1365-3091.2012.01367.x
Taylor MA, Garboczi EJ, Erdogan ST, Fowler DW (2006) Some properties of irregular 3-D particles. Powder Technol 162:1–15. https://doi.org/10.1016/j.powtec.2005.10.013
The MathWorks Inc (2022) MATLAB version: 9.13.0 (R2022). Natick, Massachusetts: The MathWorks Inc. https://www.mathworks.com
Thomas MC, Wiltshire RJ, Williams AT (1995) The use of Fourier descriptors in the classification of particle shape. Sedimentology 42:635–645. https://doi.org/10.1111/j.1365-3091.1995.tb00397.x
Tickell FG (1931) The Examination of Fragmental Rocks. Stanford University Press, Stanford
Ueda T (2022) Estimation of three-dimensional particle size and shape characteristics using a modified 2D–3D conversion method employing spherical harmonic-based principal component analysis. Powder Technol 404:1–13. https://doi.org/10.1016/j.powtec.2022.117461
Vallejo LE (1995) Fractal analysis of granular materials. Geotechnique 45:159–163. https://doi.org/10.1680/geot.1995.45.1.159
Vallejo LE, Zhou Y (1995) The relationship between the fractal dimension and Krumbein’s roundness number. Soils Found 35:163–167. https://doi.org/10.3208/sandf1972.35.163
Vangla P, Roy N, Gali ML (2018) Image based shape characterization of granular materials and its effect on kinematics of particle motion. Granul Matter 20:1–19. https://doi.org/10.1007/s10035-017-0776-8
Vickers GT (1996) The projected areas of ellipsoids and cylinders. Powder Technol 86:195–200. https://doi.org/10.1016/0032-5910(95)03049-2
Vlahinić I, Andò E, Viggiani G, Andrade JE (2014) Towards a more accurate characterization of granular media: extracting quantitative descriptors from tomographic images. Granul Matter 16:9–21. https://doi.org/10.1007/s10035-013-0460-6
Wadell H (1932) Volume, shape, and roundness of rock particles. J Geol 40:443–451. https://doi.org/10.1086/623964
Wadell H (1933) Sphericity and roundness of rock particles. J Geol 41:310–331. https://doi.org/10.1086/624040
Wadell H (1935) Volume, shape, and roundness of quartz particles. J Geol 43:250–280. https://doi.org/10.1086/624298
Wang L, Wang X, Mohammad L, Abadie C (2005) Unified method to quantify aggregate shape angularity and texture using Fourier analysis. J Mater Civ Eng 17:498–504. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:5(498)
Wang L, Sun W, Lally EM, Wang A, Druta C, Tutumluer E (2012) Application of LADAR in the Analysis of Aggregate Characteristics. Transportation Research Board of the National Academies, Washington, DC
Wei D, Wang J, Nie J, Zhou B (2018) Generation of realistic sand particles with fractal nature using an improved spherical harmonic analysis. Comput Geotech 104:1–12. https://doi.org/10.1016/j.compgeo.2018.08.002
Wei D, Wang Z, Pereira JM, Gan Y (2021) Permeability of uniformly graded 3D printed granular media. Geophys Res Lett 48:1–12. https://doi.org/10.1029/2020GL090728
Wentworth CK (1919) A laboratory and field study of cobble abrasion. J Geol 27:507–521. https://doi.org/10.1086/622676
Wentworth CK (1922a) A method of measuring and plotting the shapes of pebbles. Bull US Geol Surv 730C:91–114. https://doi.org/10.3133/b730C
Wentworth CK (1922b) The shapes of beach pebbles. US Geol Surv Prof Pap 131C:75–83. https://doi.org/10.3133/pp131C
Wentworth CK (1933) The shapes of rock particles: a discussion. J Geol 41:306–309. https://doi.org/10.1086/624039
Williams EM (1965) A method of indicating pebble shape with one parameter. J Sediment Res 35:993–996. https://doi.org/10.1306/74D713ED-2B21-11D7-8648000102C1865D
Wilson JD, Klotz LD (1996) Quantitative analysis of aggregate based on Hough transform. Transp Res Rec 1530:111–115. https://doi.org/10.1177/0361198196153000114
Xu MQ, Guo N, Yang ZX (2021) Particle shape effects on the shear behaviors of granular assemblies: irregularity and elongation. Granul Matter 23:1–15. https://doi.org/10.1007/s10035-021-01096-4
Yan WM, Su D (2018) Inferring 3D particle size and shape characteristics from projected 2D images: Lessons learned from ellipsoids. Comput Geotech 104:281–287. https://doi.org/10.1016/j.compgeo.2017.11.015
Yang J, Luo XD (2015) Exploring the relationship between critical state and particle shape for granular materials. J Mech Phys Solids 84:196–213. https://doi.org/10.1016/j.jmps.2015.08.001
Yang H, Baudet BA, Yao T (2016) Characterization of the surface roughness of sand particles using an advanced fractal approach. Proc R Soc A 472:20160524. https://doi.org/10.1098/rspa.2016.0524
Yang X, Chen S, You Z (2017) 3D voxel-based approach to quantify aggregate angularity and surface texture. J Mater Civ Eng 29:1–10. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001872
Yang HW, Lourenço SD, Baudet BA, Choi CE, Ng CW (2019) 3D Analysis of gravel surface texture. Powder Technol 346:414–424. https://doi.org/10.1016/j.powtec.2019.01.074
Yang HW, Lourenço SD, Baudet BA (2022) 3D fractal analysis of multi-scale morphology of sand particles with μCT and interferometer. Géotechnique 72:20–33. https://doi.org/10.1680/jgeot.19.P.120
Yao T, Baudet BA, Lourenço SD (2019) Quantification of the surface roughness of quartz sand using optical interferometry. Meccanica 54:741–748. https://doi.org/10.1007/s11012-018-0879-2
Youd TL (1973) Factors controlling maximum and minimum densities of sands. In: Evaluation of Relative Density and Its Role in Geotechnical Projects Involving Cohesionless Soils, pp 98–112
Yu W, Hancock BC (2008) Evaluation of dynamic image analysis for characterizing pharmaceutical excipient particles. Int J Pharm 361:150–157. https://doi.org/10.1016/j.ijpharm.2008.05.025
Zhao B, Wang J, Coop MR, Viggiani G, Jiang M (2015) An investigation of single sand particle fracture using X-ray micro-tomography. Géotechnique 65:625–641. https://doi.org/10.1680/geot.4.P.157
Zhao B, Wang J (2016) 3D quantitative shape analysis on form, roundness, and compactness with μCT. Powder Technol 291:262–275. https://doi.org/10.1016/j.powtec.2015.12.029
Zhao L, Zhang S, Deng M, Wang X (2021) Statistical analysis and comparative study of multi-scale 2D and 3D shape features for unbound granular geomaterials. Transp Geotech 26:1–12. https://doi.org/10.1016/j.trgeo.2020.100377
Zheng J, Hryciw RD (2014) Soil particle size characterization by stereophotography. In: Geotechnical Special Publication, pp 64–73
Zheng J, Hryciw RD (2015) Traditional soil particle sphericity, roundness and surface roughness by computational geometry. Géotechnique 65:494–506. https://doi.org/10.1680/geot.14.P.192
Zheng J, Hryciw RD (2016a) Segmentation of contacting soil particles in images by modified watershed analysis. Comput Geotech 73:142–152. https://doi.org/10.1016/j.compgeo.2015.11.025
Zheng J, Hryciw RD (2016b) Roundness and sphericity of soil particles in assemblies by computational geometry. J Comput Civ Eng 30:1–13. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000578
Zheng J, Hryciw RD (2018) Identification and characterization of particle shapes from images of sand assemblies using pattern recognition. J Comput Civ Eng 32:1–13. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000765
Zheng W, Hu X, Tannant DD, Zhang K, Xu C (2019) Characterization of two-and three-dimensional morphological properties of fragmented sand grains. Eng Geol 263:1–18. https://doi.org/10.1016/j.enggeo.2019.105358
Zheng J, Sun Q, Zheng H, Wei D, Li Z, Gao L (2020a) Three-dimensional particle shape characterizations from half particle geometries. Powder Technol 367:122–132. https://doi.org/10.1016/j.powtec.2020.03.046
Zheng W, Hu X, Tannant DD (2020b) Shape characterization of fragmented sand grains via X-ray computed tomography imaging. Int J Geomech 20:1–14. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001599
Zheng J, He H, Alimohammadi H (2021) Three-dimensional Wadell roundness for particle angularity characterization of granular soils. Acta Geotech 16:133–149. https://doi.org/10.1007/s11440-020-01004-9
Zheng J, Zhang Z, Li C, Li Z, Gao L (2022) Laboratory-on-a-smartphone for estimating angularity of granular soils. Acta Geotech 17:2651–2674. https://doi.org/10.1007/s11440-021-01259-w
Zhou B, Wang J, Zhao B (2015) Micromorphology characterization and reconstruction of sand particles using micro X-ray tomography and spherical harmonics. Eng Geol 184:126–137. https://doi.org/10.1016/j.enggeo.2014.11.009
Zhou B, Wang J (2017) Generation of a realistic 3D sand assembly using X-ray micro-computed tomography and spherical harmonic-based principal component analysis. Int J Numer Analy Methods Geomech 41:93–109. https://doi.org/10.1002/nag.2548
Zhou B, Wang J, Wang H (2018) Three-dimensional sphericity, roundness and fractal dimension of sand particles. Géotechnique 68:18–30. https://doi.org/10.1680/jgeot.16.P.207
Zingg T (1935) Beitrag zur schotteranalyse. Schweiz Mineral Petrogr Mitt 15:39–140
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no conflict of interest.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Anusree, K., Latha, G.M. Characterization of sand particle morphology: state-of-the-art. Bull Eng Geol Environ 82, 269 (2023). https://doi.org/10.1007/s10064-023-03309-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10064-023-03309-x