Abstract
The two-dimensional thermoelastic tractive rolling contact problem for a half-plane which is coated with a functionally graded material (FGM), under the plane strain deformation, is studied in this paper. A rigid cylinder rolls over the surface of an FGM coating with constant translational velocity, generating frictional heating in the slip zones of the contact area. Thermomechanical properties of the FGM vary exponentially along the thickness direction. It is assumed that the contact area consists of a central stick zone and two slip zones of the same sign. The transfer matrix method and Fourier integral transform technique are used to achieve a system of two Cauchy singular integral equations. The coupling effect of tangential traction is eliminated by adapting the conventional Goodman approximation. The associated governing equations are discretized by applying the Gauss–Chebyshev integration method gaining a system of linear algebraic equations. The effects of Peclet number, material properties’ grading ratios and friction coefficient on surface and in-plane stresses, stick zone boundaries and surface temperature distribution are studied.
Similar content being viewed by others
References
Alinia, Y., Beheshti, A., Guler, M.A., El-Borgi, S., Polycarpou, A.A.: Sliding contact analysis of functionally graded coating/substrate system. Mech. Mater. 94, 142–155 (2016)
Alinia, Y., Zakerhaghighi, H., Adibnazari, S., Güler, M.A.: Rolling contact problem for an orthotropic medium. Acta Mech. 228(2), 447–464 (2017)
Barik, S.P., Kanoria, M., Chaudhuri, P.K.: Steady state thermoelastic contact problem in a functionally graded material. Int. J. Eng. Sci. 46(8), 775–789 (2008)
Bentall, R.H., Johnson, K.L.: Slip in the rolling contact of two dissimilar elastic rollers. Int. J. Mech. Sci. 9, 389–404 (1967)
Carter, F.W.: On the action of a locomotive driving wheel. Proc. R. Soc. A Math. Phys. Eng. Sci. 112(760), 151–157 (1926)
Choi, H.J., Paulino, G.H.: Thermoelastic contact mechanics for a flat punch sliding over a graded coating/substrate system with frictional heat generation. J. Mech. Phys. Solids 56(4), 1673–1692 (2008)
Chudzikiewicz, A.: Thermoelastic rolling contact problems for a multi-layer structure. Nonlinear Anal. Real World Appl. 22, 1–2 (2013)
Chudzikiewicz, A., Myśliński, A.: Thermoelastic wheel–rail contact problem with elastic graded materials. Wear 271(1–2), 417–425 (2011)
Comez, B.: Contact problem of a functionally graded layer resting on a Winkler foundation. Acta Mech. 224(11), 2833–2843 (2013)
Comez, I., Guler, M.A.: The contact problem of a rigid punch sliding over a functionally graded bilayer. Acta Mech. 228(6), 2237–2249 (2017)
Dag, S., Yildirim, B., Sarikaya, D.: Mixed-mode fracture analysis of orthotropic functionally graded materials under mechanical and thermal loads. Int. J. Solids Struct. 44(24), 7816–7840 (2007)
Draganis, A., Larsson, F., Ekberg, A.: Finite element analysis of transient thermomechanical rolling contact using an efficient arbitrary Lagrangian–Eulerian description. Comput. Mech. 54(2), 389–405 (2014)
El-Borgi, S., Abdelmoula, R., Keer, L.: A receding contact plane problem between a functionally graded layer and a homogeneous substrate. Int. J. Solids Struct. 43(3–4), 658–674 (2006)
El-Borgi, S., Usman, S., Güler, M.A.: A frictional receding contact plane problem between a functionally graded layer and a homogeneous substrate. Int. J. Solids Struct. 51(25–26), 4462–4476 (2014)
Elloumi, R., Kallel-kamoun, I., El-borgi, S.: Mechanics of materials a fully coupled partial slip contact problem in a graded half-plane. Mech. Mater. 42(4), 417–428 (2010)
Enomoto, Y., Yamamoto, T.: New materials in automotive tribology. Tribol. Lett. 5(1), 13–24 (1998)
Goodman, L.E.: Contact stress analysis of normally loaded rough spheres. J. Appl. Mech. 29(3), 515 (1962)
Guler, M.A., Adibnazari, S., Alinia, Y.: Tractive rolling contact mechanics of graded coatings. Int. J. Solids Struct. 49(6), 929–945 (2012)
Guler, M.A., Erdogan, F.: Contact mechanics of graded coatings. Int. J. Solids Struct. 41, 3865–3889 (2004)
Guler, M.A., Erdogan, F.: Contact mechanics of two deformable elastic solids with graded coatings. Mech. Mater. 38, 633–647 (2006)
Guler, M.A., Erdogan, F.: The frictional sliding contact problems of rigid parabolic and cylindrical stamps on graded coatings. Int. J. Mech. Sci. 49, 161–182 (2007)
Guo, L.C., Noda, N.: Dynamic investigation of a functionally graded layered structure with a crack crossing the interface. Int. J. Solids Struct. 45(1), 336–357 (2008)
Hills, D.A., Nowell, D., Sackfield, A.: Mechanics of Elastic Contacts. Butterworth-Heinemann, Oxford (1993)
Jin, Z.H., Noda, N.: Transient thermal stress intensity factors for a crack in a semi-infinite plate of a functionally gradient material. Int. J. Solids Struct. 31(2), 203–218 (1994)
Johnson, K.L.: Contact Mechanics. Cambridge University Press, London (1985)
Kalker, J.J.: A minimum principle for the law of dry friction, with application to elastic cylinders in rolling contact, part 1: fundamentals-application to steady rolling. J. Appl. Mech. 38, 875–880 (1971)
Kalker, J.J.: A minimum principle for the law of dry friction, part 2: application to nonsteadily rolling elastic cylinders. J. Appl. Mech. 38(4), 881–887 (1971)
Ke, L.L., Wang, Y.S.: Fretting contact with finite friction of a functionally graded coating with arbitrarily varying elastic modulus part 1: normal loading. J. Strain Anal. Eng. Design 42(5), 293–304 (2007)
Ke, L.L., Wang, Y.S.: Two-dimensional sliding frictional contact of functionally graded materials. Eur. J. Mech. A Solids 26(1), 171–188 (2007)
Ke, Ll, Wang, Ys: Fretting contact of two dissimilar elastic bodies with functionally graded coatings. Mech. Adv. Mater. Struct. 17(6), 433–447 (2010)
Krenk, S.: On quadrature formulas for singular integral equations of the first and the second kind. Q. Appl. Math. 33(3), 225–232 (1975)
Krenk, S.: On the use of the interpolation polynomial for solutions of singular integral equations. Q. Appl. Math. 32(4), 479–484 (1975)
Kucuksucu, A., Guler, M.A., Avci, A.: Mechanics of sliding frictional contact for a graded orthotropic half-plane. Acta Mech. 226(10), 3333–3374 (2015)
Li, W., Wen, Z., Jin, X., Wu, L.: Numerical analysis of rolling-sliding contact with the frictional heat in rail. Chin. J. Mech. Eng. 27(1), 41–49 (2014)
Liu, J., Ke, L.L., Wang, Y.S.: Thermoelastic contact analysis of functionally graded materials with properties varying exponentially. Adv. Mater. Res. 189–193, 988–992 (2011)
Liu, J., Ke, L.L., Wang, Y.S.: Two-dimensional thermoelastic contact problem of functionally graded materials involving frictional heating. Int. J. Solids Struct. 48(18), 2536–2548 (2011)
Liu, T.J., Wang, Y.S.: Axisymmetric frictionless contact problem of a functionally graded coating with exponentially varying modulus. Acta Mech. 199(1), 151–165 (2008)
Munisamy, R., Hills, D.A., Nowell, D.: Brief note on the tractive rolling of dissimilar elastic cylinders. Int. J. Mech. Sci. 33(3), 225–228 (1991)
Nowell, D., Hills, D.A.: Tractive rolling of dissimilar elastic cylinders. Int. J. Mech. Sci. 30(6), 427–439 (1988)
Parkus, H.: Thermoelasticity. Blaisdell Pub. Co., Waltham (1968)
Pauk, V., Zastrau, B.: 2D rolling contact problem involving frictional heating. Int. J. Mech. Sci. 44(12), 2573–2584 (2002)
Shahzamanian, M.M., Sahari, B.B., Bayat, M., Ismarrubie, Z.N., Mustapha, F.: Transient and thermal contact analysis for the elastic behavior of functionally graded brake disks due to mechanical and thermal loads. Mater. Design 31(10), 4655–4665 (2010)
Shi, Z.: Mechanical and Thermal Contact Analysis in Layered Elastic Solids. Ph.D. Dissertation, University of Minnesota (2001)
Shodja, H.M., Ghahremaninejad, A.: An FGM coated elastic solid under thermomechanical loading: a two dimensional linear elastic approach. Surf. Coat. Technol. 200(12–13), 4050–4064 (2006)
Suresh, S., Mortensen, A., Needleman, A.: Fundamentals of Metal-matrix Composites: Materials Processing and Thermomechanical Behavior of Graded Metals and Metal Ceramic Composites. IOM Communications Ltd., London (1998)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Nili, A., Adibnazari, S. & Karimzadeh, A. Rolling contact mechanics of graded coatings involving frictional heating. Acta Mech 230, 1981–1997 (2019). https://doi.org/10.1007/s00707-019-2362-0
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-019-2362-0