Abstract
The problem of anti-plane shear stress of two bonded dissimilar half spaces with an elliptical hole or a rigid inclusion at the interface and having interfacial cracks is presented. Uniform anti-plane shear stresses and the stress free or zero displacement boundary conditions on the elliptical hole are considered. The two cases are reduced to Riemann–Hilbert problems and closed form solutions are obtained by use of the complex stress function and the conformal mapping approaches. Stress distributions, as well as stress intensity factor, are shown. When the elliptical hole collapses, the known solutions of the interfacial crack and thin rigid fiber can be obtained. If the coordinates in the Plemelj function are changed, a debonding length can be determined.
Similar content being viewed by others
References
Murakami Y.: Stress Intensity Factors Handbook, vols.1, 2. Pergamon Press, New York (1987)
Murakami Y.: Stress Intensity Factors Handbook, vol. 3, The Society of Materials Science, Japan. Pergamon Press, New York (1992)
Murakami Y.: Stress Intensity Factors Handbook, vols. 4, 5, The Society of Materials Science, Japan. Elsevier, Amsterdam (2001)
Erdogan F., Cook T.S.: Antiplane shear crack terminating at and going through a bimaterial interface. Int. J. Fract. 10–2, 227–240 (1974)
Dhaliwal R.S., Saxena H.S., Rokne j.G.: Antiplanar shear problem for a crack between dissimilar nonhomogenous isotropic elastic layers. Eng. Fract. Mech. 42–4, 653–662 (1992)
Hasebe N., Okumura M., Nakamura T.: Bonded bi-material half-planes with semi-elliptical notch under tension along the interface. J. Appl. Mech. ASME 59, 77–83 (1992)
Okumura M., Hasebe N., Nakamura T.: Bimaterial plane with elliptic hole under uniform tension normal to the interface. Int. J. Fract. 71, 293–310 (1995)
Prasad P.B.N., Hasebe N., Wang X.F., Shirai Y.: Green’s function for a bi-material problem with interfacial elliptical rigid inclusion and applications to crack and thin rigid line problems. Int. J. Solids Struct. 42, 1513–1535 (2005)
Salama M., Hasebe N.: Thin plate bending of dissimilar half-planes with interface debonding emanating from an elliptical hole. Int. J. Fract. 74–3, 199–218 (1995)
Salama M., Hasebe N.: Stress concentration factors at an elliptical hole on the interface between bonded dissimilar half planes under bending moment. J. Appl. Mech. ASME 63, 7–14 (1996)
Wang X.F., Hasebe N.: Green’s function of a point dislocation for the bending of a composite infinite plate with an elliptical hole at interface. Arch. Appl. Mech. 71, 233–248 (2001)
Ballarini R.: A rigid line inclusion at a bimaterial interface. Eng. Fract. Mech. 37–1, 1–5 (1990)
Wu K.C.: Line inclusions at anisotropic bimaterial interface. Mech. Mater. 10, 173–183 (1990)
Jiang C.P., Liu C.T.: Stress distribution around a rigid line in dissimilar media. Eng. Fract. Mech. 42–1, 27–32 (1992)
Markenscoff X., Ni L., Dundurs J.: The interface anticrack and Green’s functions for interacting anticracks and cracks/anticracks. J. Appl. Mech. ASME 61, 797–802 (1994)
Markenscoff X., Ni L.: The debonded interface anticrack. J. Appl. Mech. ASME 63, 621–627 (1996)
Boniface V., Hasebe N.: Solution of the displacement boundary value problem of an interface between two dissimilar half planes and a rigid elliptic inclusion at the interface. J. Appl. Mech. ASME 65, 880–888 (1998)
Prasad P.B.N., Hasebe N., Wang X.F., Shirai Y.: Green’s function of a bimaterial problem with a cavity on the interface—Part I: Theory. J. Appl. Mech. ASME 72, 389–393 (2005)
Benthem, J.P., Koiter, W.T.: Methods of analysis and solutions of crack problems. In: Sih, G.C. (ed.) Mechanics of Fracture I, Chap. 3. Noordhof, Gronigen (1973)
Muskhelishvili N.I.: Some Basic Problems of the Mathematical Theory of Elasticity. Noordhof, Groningen (1963)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hasebe, N., Keer, L.M. Anti-plane shear stress problem of two bonded dissimilar half spaces with an elliptical hole or rigid inclusion on the interface. Acta Mech 203, 97–111 (2009). https://doi.org/10.1007/s00707-008-0003-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-008-0003-0