Abstract
The interest in flexible stretchable printed electronics has increased because of the wide applications, especially for wearables devices. The conventional manufacturing processes were time consuming and expensive, which led to developing of stretchable interconnects using screen printing. In this research, meander patterns of varying meander angles were designed and screen-printed on thermoplastic polyurethane substrates. Silver inks and carbon inks were used to print the circuits, which were subjected to tensile tests while their changes in resistance were measured. The electrical characteristics were utilised to determine the elastic limits of the circuits and the conditions for cyclic tests of up to 10,000 cycles. It was found that the maximum strain at break of the silver ink was 47%. Carbon ink had a higher initial resistance value and the maximum strain at break was 125%. The best stretchability was obtained at the 0° meander angle, a curing time of 30 min and curing temperature of 130 °C with oven cooling.
Similar content being viewed by others
References
Arulvanan P, Zhong ZW (2006) Assembly and reliability of PBGA packages on FR-4 PCBs with SnAgCu solder. Microelectron Eng 83(11–12):2462–2468
Aziz NA (2013) Development of a scale-up version of stretchable sensor for robotic application. Report of Nanyang Technological Univeristy, Singapore
BASF (2011) Thermoplastic polyurethane elastomer (TPU). Lemforde, Elastogranstraße
Bossuyta F, Guentherb J, Löherc T, Seckelc M, Sterkena T, Vriesd JD (2011) Cyclic endurance reliability of stretchable electronic substrates. Microelectron Reliab 51(3):628–635
Cai L, Zhang S, Zhang Y, Li J, Miao J, Wang Q, Yu Z, Wang C (2018) Direct printing for additive patterning of silver nanowires for stretchable sensor and display applications. Adv Mater Technol 3(2):1700232
Cui Z, Han Y, Huang Q, Dong J, Zhu Y (2018) Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics. Nanoscale 10(15):6806–6811
DuPont (2014) DuPont microcircuit materials introduces stretchable inks for wearable electronics. Retrieved 30 Aug 2016, from http://www.dupont.com/products-and-services/electronic-electrical-materials/media/press-releases/20141204-stretchable-inks-for-wearable-electronics.html
Feng X, Wei L, Yong Z (2011) Controlled 3D buckling of silicon nanowires for stretchable electronics. ACS Nano 5(1):672–678
Goldberg HD, Brown RB, Liu DP, Meyerhoff ME (1994) Screen Printing a technology for the batch fabrication of integrated chemical-sensor arrays. Sensor Acuators 21(2):171–183
Gonzalez M, Axisa F, Bulcke MV, Brosteaux D, Vandevelde B, Vanfleteren J (2008) Design of metal interconnects for stretchable electronic circuits. Microelectron Reliab 48(6):825–832
Hicks EM, Ultee AJ, Drougas J (1965) Spandex elastic fibers. Science 147(3656):373–379
Ho X, Cheng CK, Tham CL, Lee RST, Lu H, Suriya A, Shan X (2015) Conformable and transparent electronics. Singapore Report of Singapore Institute of Manufacturing Technology
Hobby A (1997) Screen printing for the industrial user. Gwent Group Retrieved 5 Sep 2016, from http://www.gwent.org/gem_screen_printing.html
Hong H, Chen C-M (2014) Design, fabrication and failure analysis of stretchable electrical routings: review. Sensors 14(7):11855–11877
Hornyak T (2008) “RFID powder”. Sci Am 298:68–71
Huck WTS, Bowden N, Onck P, Pardoen T, Hutchinson JW, Whitesides GM (2000) Ordering of spontaneously formed buckles on planar surfaces. Langmuir 16(7):3497–3501
Khang DY, Rogers JA, Lee HH (2008) Mechanical buckling: mechanics, metrology, and stretchable electronics. Adv Funct Mater 19(10):1526–1536
Kim D-H, Xiao J, Song J, Huang Y, Roger JA (2010) Stretchable, curvilinear electronics based on inorganic materials. Adv Mater 22(19):2108–2124
Kim D-H, Lu N, Ma R, Kim Y-S, Kim R-H, Wang S, Wu J, Won SM, Tao H, Islam A, Yu KJ, Kim T-I, Chowdhury R, Ying M, Xu L, Li M, Chung H-J, Keum H, McCormick M, Liu P, Zhang Y-W, Omentto FG, Huang Y, Coleman T, Rogers JA (2011) Epidermal Electronics. Science 333(6044):838–843
Lacour SP, Jones J, Wagner S, Li T, Suo Z (2005) Stretchable interconnects for elastic electronic surfaces. Proc IEEE 93(8):1459–1467
Lee J-W, Mun KK, Yoo YT (2009) A comparative study on roll-to-roll gravure printing on PET and BOPP webs aqueous ink. Progress Org Coat 64:98–108
Li T, Huang Z, Suo Z, Lacour SP, Sigurd W (2004) Stretchbility of thin metal films on elastomer substrates. Appl Phys Lett 85(16):3435–3437
Lötters JC, Olthuis W, Veltink PH, Bergveld P (1997) The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications. J Micromech Microeng 7(3):145–147
Merilampi S, Björninen T, Haukka V, Ruuskanen P, Ukkonen L, Sydänheimo L (2010) Analysis of electrically conductive silver ink on stretchable substrates under tensile loading. Microelectron Reliab 50(12):2001–2011
Mohammed Ali M, Maddipatla D, Narakathu BB, Chlaihawi AA, Emamian S, Janabi F, Bazuin BJ, Atashbar MZ (2018) Printed strain sensor based on silver nanowire/silver flake composite on flexible and stretchable TPU substrate. Sens Actuat A Phys 274:109–115
Nagase America. Electric conductive ink for printed electronics. Electric conductive inks for printed electronics. Retrieved 30 August 2016. http://nagaseamerica.com/product/electric-conductive-ink-printed-electronics/
Owczarek JA, Howland FL (1990) A study of the off-contact screen printing process-Part 1: model of the printing process and some results derived from experiments. IEEE Trans Compon Hybrids Manuf Technol 13(2):358–367
Pardo DA, Jabbour GE, Peyghambarian N (2000) Application of screen printing in the fabrication of organic light-emitting devices. Adv Mater 12(17):1249–1252
Romeo A, Liu Q, Suo Z, Lacour SP (2013) Elastomeric substrates with embedded stiff platforms for stretchable electronics. Appl Phys Lett 102(13):Article Number: 131904
Sirringhaus H, Kawase T, Friend RH, Shimoda T, Inbasekaran M, Wu W, Woo EP (2000) High-resolution inkjet printing of all-polymer transistor circuits. Science 290(5499):2123–2126
Tai Y-L, Yang Z-G (2012) Preparation of stable aqueous conductive ink with silver nanoflakes and its application on paper-based flexible electronics. Surf Interf Anal 44(5):529–534
Tang RWL (2017) Mechanical and electrical characteristics of screen printed stretchable circuits. Report of Project B190. Nanyang Technological University, Singapore
University of Cambridge (2008) Polymer stress-strain curve. DoITPoMS Retrieved 10 March 2017, from https://www.doitpoms.ac.uk/tlplib/polymers/stress-strain.php
Wu HP, Liu JF, Wu XJ, Ge MY, Wang YW, Zhang GQ, Jiang JZ (2006) High conductivity of isotropic conductive adhesives filled with silver nanowires. Int J Adhes Adhes 26(8):617–621
Xu F, Zhu Y (2012) Highly conductive and stretchable silver nanowire conductor. Adv Mater 24(37):5117–5122
Xu L, Gutbrod S, Bonifas AP, Su Y, Sulkin MS, Lu N, Chung H-J, Jang K-I, Liu Z, Ying M, Lu C, Webb RC, Kim J-S, Laughner JI, Cheng H, Liu Y, Ameen A, Jeong J-W, Kim G-T, Huang Y, Efimov IR, Rogers JA (2014) 3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicaedium. Nat Commun 5:Article Number: 3329
Zhong ZW, Goh KS (2000) Flip chip on Fr-4, ceramics and flex. J Electron Manuf 10(2):89–96
Zhong ZW, Arulvanan P, Shi XQ (2005) Lead-free PCB assembly and effects of process conditions on the profile and reliability of solder joints. Solder Surf Mount Technol 17(4):33–37
Zhong ZW, Ng HH, Chen SH, Shan XC (2018) Hot roller embossing of multi-dimensional microstructures using elastomeric molds. Microsyst Technol Micro Nanosyst Inf Storage Process Syst 24(3):1443–1452
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zhong, Z.W., Tang, R.W.L., Chen, S.H. et al. A study of screen printing of stretchable circuits on polyurethane substrates. Microsyst Technol 25, 339–350 (2019). https://doi.org/10.1007/s00542-018-3969-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-018-3969-0