Abstract
Most printed material is produced by printing halftone dot patterns. One of the key issues that determine the attainable print quality is the structure of the paper surface, but the relation is non-deterministic in nature. We examine the halftone print quality and study the statistical dependence between the defects in printed dots and the topography measurement of the unprinted paper. The work concerns SC paper samples printed by an IGT gravure test printer. We have small-scale 2D measurements of the unprinted paper surface topography and the reflectance of the print result. The measurements before and after printing are aligned with subpixel resolution, and individual printed dots are detected. First, the quality of the printed dots is studied using Self Organizing Map and clustering and the properties of the corresponding areas in the unprinted topography are examined. The printed dots are divided into high and low print quality. Features from the unprinted paper surface topography are then used to classify the corresponding paper areas using Support Vector Machine classification. The results show that the topography of the paper can explain some of the print defects. However, there are many other factors that affect the print quality, and the topography alone is not adequate to predict the print quality.
Similar content being viewed by others
References
Kipphan H (ed) (2001) Handbook of print media. Technologies and production methods. Springer, Berlin
Saarelma HJ, Oittinen PT (1993) Paper and print noise as limiting factors of information capacity. In: Baker CF (ed) Transactions of the 10th fundamental research symposium, products of papermaking, Oxford, UK, September 1993. FRC/Pira International, Leatherhead, pp 351–365
Parker JR (1973) Fundamental paper properties in relation to printability. In: Bolam F (ed) Transactions of the 5th fundamental research symposium. Cambridge, UK, 1973. BPBIF, London, pp 517–543
Heintze HU, Gordon RW (1979) Tuning of the GRI proof press as a predictor of rotonews print quality in the pressroom. TAPPI J 62(11):97–101
Bristow JA, Ekman H (1981) Paper properties affecting gravure print quality. TAPPI J 64(10):115–118
IGT Testing Systems (2003) IGT Information leaflet W41, available at http://www.igt.nl/GB/testmethods.asp
Mangin PJ, Béland M-C, Cormier LM (1993) A structural approach to paper surface compressibility—relationship with printing characteristics. In: Baker CF (ed) Transactions of the 10th fundamental research symposium. Oxford, UK, 1993. FRC/Pira International, Leatherhead, pp 1397–1427
Preston J, Bollström R, Nylander K, Toivakka M, Peltonen J (2008) A new test method to measure dynamic contact in a printing nip for rotogravure paper. In: Proceedings of the 35th international research conference of Iarigai. Valencia, pp 147–153
Barros GG (2006) Influence of substrate topography on ink distribution in flexography. Ph.D. thesis, Karlstad University
Mettänen M, Hirn U, Lauri M, Ritala R (2009) Probabilistic analysis of small-scale print defects with aligned 2D measurements. In: I'Anson SJ (ed) Transactions of the 14th fundamental research symposium. Oxford, UK, 2009. FRC, Bury, pp 1293–1323
Lauri M, Ihalainen H (2010) Measuring periodic patterns in noisy spatial data. In: Proceedings of ENBIS—IMEKO TC 21 workshop on measurement systems and process improvement, 19–20 April 2010. National Physical Laboratory (NPL), Teddington
Mettänen M, Lauri M, Ihalainen H, Kumpulainen P, Ritala R (2009) Aligned analysis of surface topography and printed dot pattern maps. In: Proceedings of papermaking research symposium 2009. Kuopio
Kohonen T (1995) Self-organizing maps. Series in information sciences, vol 30. Springer, Heidelberg
Vesanto J, Alhoniemi E (2000) Clustering of the self-organizing map. IEEE Trans Neural Netw 11(3):586–600
Cristianini N, Shawe-Taylor J (2000) An introduction to support vector machines and other kernel-based learning methods. Cambridge University Press, Cambridge
Hansson P, Johansson P-Å (2000) Topography and reflectance analysis of paper surfaces using a photometric stereo method. Opt Eng 39(9):2555–2561
Mettänen M, Ihalainen H, Ritala R (2008) Alignment and statistical analysis of 2D small-scale paper property maps. Appita J 61(4):323–330
Welch PD (1967) The use of fast Fourier transform for the estimation of power spectra: a method based on time averaging over short, modified periodograms. IEEE Trans Audio Electroacoust 15(2):70–73
Johnson RA, Wichern DW (1998) Applied multivariate statistical analysis, 4th edn. Prentice-Hall, Madison
Kumpulainen P, Mettänen M, Lauri M, Ihalainen H (2009) Relating halftone dot quality to paper surface topography. In: 11th International conference, engineering applications of neural networks. Proceedings, London, UK. Springer, pp 178–189
Everitt B, Landau S, Leese M (2001) Cluster analysis. 4th edn. Arnold publishers, London
Gnanadesikan R, Kettenring J, Tsao S (1995) Weighting and selection of variables for cluster analysis. J Classif 12(1):113–136
Vesanto J, Himberg J, Alhoniemi E, Parhankangas J (1999) Self-organizing map in Matlab: the SOM toolbox. In: Proceedings of the Matlab DSP conference 1999. Espoo, pp 35−40
Vesanto J (1999) SOM-based data visualization methods. Intell Data Anal 3(2):111–126
Boser BE, Guyon I, Vapnik V (1992) A training algorithm for optimal margin classifiers. In: Fifth annual workshop on computational learning theory. ACM Press, Pittsburgh, pp 144–152
Chang C-C, Lin C-J (2001) LIBSVM: a library for support vector machines. http://www.csie.ntu.edu.tw/~cjlin/papers/libsvm.pdf, Software available at http://www.csie.ntu.edu.tw/~cjlin/libsvm
Schölkopf B, Smola A, Williamson RC, Bartlett PL (2000) New support vector algorithms. Neural Comput 12:1207–1245
Wu T-F, Lin C-J, Weng RC (2004) Probability estimates for multi-class classification by pairwise coupling. J Mach Learn Res 5:975–1005
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kumpulainen, P., Mettänen, M., Lauri, M. et al. Relating halftone dot quality to paper surface topography. Neural Comput & Applic 20, 803–813 (2011). https://doi.org/10.1007/s00521-010-0497-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00521-010-0497-y