Skip to main content
SpringerLink
Log in

Effect of particle size on friction signal characters when lapping quartz glass with fixed abrasive pad

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

The particle size of fixed abrasive pad (FAP) is an important factor affecting its machining performance and surface condition. The surface condition of consolidated FAP is closely related to the tribological characteristics. However, the relationship between tribological characteristics of FAP and surface condition has not been studied in depth. Therefore, the mapping relationship between friction characteristic signal and FAP surface condition is established in this paper, and the influence of FAP abrasive particle size on the friction signal characteristic in the lapping process of quartz glass is explored. Four FAPs (W3.5, W7, W10, and W14) were used for the lapping experiments and tribological experiments on quartz glass, and the friction signals in each processing stage were processed and feature signals were extracted. Moreover, the material removal rate, debris particle size distribution and micro morphology, friction coefficient, surface micro morphology of workpiece, and FAP at each processing stage were analyzed. The experimental results showed that there is a close relationship between energy of wavelet packet frequency band 8 and marginal spectrum amplitude and cutting performance of FAP surface abrasive particles. Their values increase with the increase of the abrasive particle size. There is a close relationship between energy of wavelet packet frequency band 7 and cutting performance of FAP surface matrix. Their value decreases with the increase of abrasive particle size. This study provides a theoretical basis for FAP online monitoring.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

Availability of data and material

All data generated or analyzed during this study are included in this manuscript.

References

  1. Ju ZL, Zhu YW, Wang JB, Zuo DW (2015) The effect of different slurries on material removal of sapphire surface in fixed-abrasive lapping. Int J Mach Mach Mater 17(1):39–48. https://doi.org/10.1504/IJMMM.2015.069215

    Article  Google Scholar 

  2. Niu FL, Wang KR, Sun T, Zhou P, Hu WD, Zhu YW (2021) Lapping performance of mixed-size agglomerated diamond abrasives in fixed abrasives pads. Diamond Relat Mater 118:108499. https://doi.org/10.1016/j.diamond.2021.108499

    Article  Google Scholar 

  3. Wang JB, Zhu YW, Xie CX, Xu J, Ju ZL (2014) Role of slurry in single crystal sapphire lapping with fixed abrasive pad. Opt Precis Eng 22(11):3004–3011. https://doi.org/10.3788/OPE.20142211.3004

    Article  Google Scholar 

  4. Yanagihara K, Kita R (2019) Study on mat-surface fabrication utilizing fixed-abrasive tool (application to brittle material). IOP Conf Ser: Mater Sci Eng 501(1):012029. https://doi.org/10.1088/1757-899X/501/1/012029

    Article  Google Scholar 

  5. Lin B, Jiang XM, Li SP, Cao ZC (2019) Mechanism of material removal by fixed abrasive lapping of fused quartz glass. J Manuf Process 46:279–285. https://doi.org/10.1016/j.jmapro.2019.08.030

    Article  Google Scholar 

  6. Wang ZK, Yang YK, Pang MH, Li YF, Ma LJ, Yao JG, Zhu YW, Su JX (2021) Response surface model of processing parameters for lapping quartz glass with a fixed abrasive pad. Surf Technol 50(07):376–385. https://doi.org/10.16490/j.cnki.issn.1001-3660.2021.07.040

    Article  Google Scholar 

  7. Luo XY, Yang W, Qian Y (2021) Fixed abrasive polishing: the effect of particle size on the workpiece roughness and sub-surface damage. Int J Adv Manuf Technol 115(9):3021–3035. https://doi.org/10.1007/S00170-021-07363-1

    Article  Google Scholar 

  8. Wang ZK, Yang YK, Pang MH, Ma LJ, Liang MC, Li YF, Su JX (2020) Optimization of process parameters for lapping quartz glass with fixed abrasive. Diam Abrasives Eng 40(5):90–95. https://doi.org/10.13394/j.cnki.jgszz.2020.5.0016

    Article  Google Scholar 

  9. Wang HQ, Niu FL, Chen JP, Jiang ZL, Wang WJ, Bu ZZ, Wang XH, Li J, Zhu YW, Sun T (2022) High efficiency polishing of silicon carbide by applying reactive non-aqueous fluids to fixed abrasive pads. Ceram Int 48(5):7273–7282

    Article  Google Scholar 

  10. Wu K, Touse D, Zhou LB, Lin WP, Shimizu J, Onuki T, Yuan JL (2021) Chemo-mechanical grinding by applying grain boundary cohesion fixed abrasive for monocrystal sapphire. Precis Eng 70:110–116

    Article  Google Scholar 

  11. Lu DH, Su GS, Guan GS, Zhou R (2005) Erosion resistance of epoxy toughened with polyurethane. Journal of Kunming University of Sci-Tech Natural Sciences (04):35–37+42. https://doi.org/10.3969/j.issn.1007-855X.2005.04.009

  12. Xu J, Zhu YW, Zhu NN, Wang JB, Li J (2014) Self-conditioning mechanism of hydrophilic fixed abrasive pad. Nanotechnol Precis Eng 12(06):429–434. https://doi.org/10.13494/j.npe.20140037

    Article  Google Scholar 

  13. Li GL, Li B, Jiang L, Ke H, Fu Y (2020) Hob wear recognition method based on HHT and lPSO-RBF neural network. J Jilin Univ (Eng Tech Ed) 50(6):1998–2009

    Google Scholar 

  14. Tang W, Chen NX, Zhang JK, Chen S, Ge SR, Zhu H, Zhang SG, Yang HF (2015) Characterization of tactile perception and optimal exploration movement. Tribol Lett 58(2):28. https://doi.org/10.1007/s11249-015-0507-4

    Article  Google Scholar 

  15. Kong DD, Chen YJ, Li N, Tan S (2017) Tool wear monitoring based on kernel principal component analysis and v-support vector regression. Int J Adv Manuf Technol 89(1):175–190. https://doi.org/10.1007/s00170-016-9070-x

    Article  Google Scholar 

  16. Priyadarshinee P (2020) Deep learning for acoustic signal processing for industrial noise. J Acoust Soc Am 148(4):2767–2767. https://doi.org/10.1121/1.5147702

    Article  Google Scholar 

  17. Jayaswalt P, Wadhwani AK (2009) Application of artificial neural networks, fuzzy logic and wavelet transform in fault diagnosis via vibration signal analysis: a review. Aust J Mech Eng 7(2):157–172. https://doi.org/10.1080/14484846.2009.11464588

    Article  Google Scholar 

  18. Chen Z, Hu YQ, Tian SQ, Lu HM, Xu LZ (2020) Non-stationary signal combined analysis based fault diagnosis method. J Commun 41(5):187–195. https://doi.org/10.11959/j.issn.1000-436x.2020099

    Article  Google Scholar 

  19. Li YZ, Ding K, He GL, Jiao XT (2018) Non-stationary vibration feature extraction method based on sparse decomposition and order tracking for gearbox fault diagnosis. Measurement 124:453–469. https://doi.org/10.1016/j.measurement.2018.04.063

    Article  Google Scholar 

  20. Huang Y, Suter B (1998) The fractional wave packet transform. MULTIDIM SYST SIGN P 9(4):399–402. https://doi.org/10.1023/A:1008414608970

  21. Yuan JL, Zhang TJ, Hang W, Ling Y, Wang J, Zhao P (2019) Experimental research on high efficiency lapping machining of lithium tantalate based on fixed abrasive pad. Surface Technology 48(10):7

    Google Scholar 

  22. Zhu YW, Wang C, Xu J, Li J (2014) Influence of pore distribution of fixed abrasive pad on its machining performance. Opt Precis Eng 22(4):7. https://doi.org/10.3788/OPE.20142204.0911

    Article  Google Scholar 

  23. Li J, Zhang YC, Ming S, Wang HT, Zhu YW, Zuo DW (2019) Effect of fixed abrasive ball on friction and wear properties of CaF2 crystal. Surface Technology 48(12):196–203. https://doi.org/10.16490/j.cnki.issn.1001-3660.2019.12.023

    Article  Google Scholar 

  24. Guo DM, Xu C, Kang RK, Jin ZJ (2011) Model analysis and experimental investigation of the friction torque during the CMP process. J Semicond 32(3):5. https://doi.org/10.1088/1674-4926/32/3/036002

    Article  Google Scholar 

  25. Xu C, Guo DM, Jin ZJ, Kang RK (2010) A signal processing method for the friction-based endpoint detection system of a CMP process. J Semicond 31(12):126002. https://doi.org/10.1088/1674-4926/31/12/126002

    Article  Google Scholar 

  26. Hu WD, Wang ZK, Dong YH, Zhang Z, Zhu YW (2022) Surface morphology characterization of fixed abrasive lapping pad based on deep learning. Diam Abrasives Eng 42(02):186–192. https://doi.org/10.13394/j.cnki.jgszz.2021.0096

    Article  Google Scholar 

  27. Zhou SX, Guo H, Xu XP (2012) Experimental study on acoustic emission phenomenon during glass grinding with single grit diamond. Diam Abrasives Eng 32(03):24–29. https://doi.org/10.13394/j.cnki.jgszz.2012.03.004

    Article  Google Scholar 

  28. Han CW, Kim KB, Lee SW, Jun MBG, Young H (2021) Thrust force-based tool wear estimation using discrete wavelet transformation and artificial neural network in CFRP drilling. Int J Precis Eng Manuf 3:1–10. https://doi.org/10.1007/S12541-021-00558-2

    Article  Google Scholar 

  29. Yao FL, Xie CK, Lv SN, Yang H, Meng Z (2021) Research on fault diagnosis of rolling bearings based on wavelet packet transform and ELM. J Saf Environ 21(06):2466–2472

    Google Scholar 

  30. Kalvoda T, Hwang YR (2010) A cutter tool monitoring in machining process using Hilbert-Huang transform. Int J Mach Tools Manuf 50(5):495–501. https://doi.org/10.1016/j.ijmachtools.2010.01.006

    Article  Google Scholar 

  31. Li GB, Ren ZY, Wang HZ, Wei HJ (2011) Characteristics extraction of friction vibration signal using harmonic wavelet packet transforms. Tribology 31(05):452–456. https://doi.org/10.1002/clc.20818

    Article  Google Scholar 

  32. Rabi J, Balusamy T, Raj Jawahar R (2019) Analysis of vibration signal responses on pre induced tunnel defects in friction stir welding using wavelet transform and empirical mode decomposition. Def Technol 15(6):885–896. https://doi.org/10.1016/j.dt.2019.05.014

    Article  Google Scholar 

  33. Wang ZK, Niu FL, Zhu YW, Li J, Wang JB (2019) Comparison of lapping performance between fixed agglomerated diamond pad and fixed single crystal diamond pad. Wear 432:202963. https://doi.org/10.1016/j.wear.2019.202963

    Article  Google Scholar 

  34. Guo J, Hang D, Zhu XJ (2020) Prediction of crack propagation in U-rib components based on the Markov chain. J Bridg Eng 25(10):04020089. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001624

    Article  Google Scholar 

  35. Yang YL, Fu PY (2018) (2018) Rolling-element bearing fault data automatic clustering based on wavelet and deep neural network. Shock Vib 2018 11:1–11. https://doi.org/10.1155/2018/3047830

    Article  Google Scholar 

  36. Liu K, Xi G, He RR, Yu NM. (2017) Changes and significance of marginal spectrum on maize leaves potential fluctuations under osmotic stress. Transactions of the CSAE, 33(1). https://doi.org/10.11975/j.issn.1002-6819.2017.01.027

  37. Agus Susanto, Budi Artono, Yunendar Handoko, Eko Novianto, Israel Martinez Ramires (2020) Application of Hilbert-Huang transform for fault condition monitoring of outer race bearing in railway bogie. IJMME-IJENS 20(5):21–30. https://doi.org/10.15282/201105-3737

  38. Wang ZK, Zhu YW, Wang JS, Wang JB, Xu J, Zuo DW (2014) Removal mechanism of lapping magnesia alumina spinel using fixed abrasive. J Synth Cryst 43(9):2205–2212. https://doi.org/10.16553/j.cnki.issn1000-985x.2014.09.011

    Article  Google Scholar 

  39. Wang WZ, Li J, Xia L, Wang HM, Zhu YW, Zuo DW (2015) Effect of abrasive sizes on lapping performance of fixed abrasive pad when machining quartz glass. Diam Abrasives Eng 35(02):9–13. https://doi.org/10.13394/j.cnki.jgszz.2015.2.0002

    Article  Google Scholar 

  40. Wang ZK, Niu FL, Wang ZK, Li J, Sun T, Zhu YW (2021) Friction and wear characteristics of agglomerated diamond abrasives and lapping performance of fixed agglomerated diamond pads. Wear 470–471(1):203598. https://doi.org/10.1016/j.wear.2020.203598

    Article  Google Scholar 

  41. Chen ZZ, Qi H, Zhao B, Zhou Y, Shi LW, Li HN, Ding WF (2020) On the tribology and grinding performance of graphene-modified porous composite-bonded CBN wheel. Ceram Int. https://doi.org/10.1016/j.ceramint.2020.09.165

    Article  Google Scholar 

  42. Wang ZK, Zhang Z, Wang SW, Pang MH, Ma LJ, Su JX (2022) Study on wavelet packet energy characteristics on friction signal of lapping with the fixed abrasive pad. Micromachines 13(7):981

    Article  Google Scholar 

  43. Wang ZK, Pang MH, Liang MC, Wang JB, Ma LJ, Liu HX, Han JH, Zhu YW, Su JX (2021) Effect of material structure on spinel machinability in its fixed abrasive lapping. J Manuf Process 68:141–153. https://doi.org/10.1016/J.JMAPRO.2021.05.035

    Article  Google Scholar 

  44. Wang ZK, Zhu YW, Jin ZH, Li J, Wang JB (2018) Effect of ethanol solution on self-condition property of hydrophilic fixed abrasive pad. Opt Precis Eng 26(4):843–849. https://doi.org/10.3788/OPE.20182604.0843

    Article  Google Scholar 

Download references

Funding

This study was supported by the National Natural Science Foundation of China (U1804142), Project funded by China Postdoctoral Science Foundation (2020M672220), Science and Technology Plan Projects of Henan province (212102210062), Postdoctoral Research Project of Henan Province (201903045).

Author information

Authors and Affiliations

  1. Postdoctoral Research Base, Henan Institute of Science and Technology, Xinxiang, 453003, China

    Zhao Zhang, Yanling Zheng, Zhankui Wang, Pengzhan Wang, Minghua Pang, Lijie Ma & Jianxiu Su

  2. Postdoctoral Station, Henan University of Science and Technology, Luoyang, 471000, China

    Zhankui Wang

  3. School of Mechanical and Electrical Engineering, Henan Institute of Science and Technology, Henan, Xinxiang, 453003, People’s Republic of China

    Zhankui Wang

Authors
  1. Zhao Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yanling Zheng
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhankui Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Pengzhan Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Minghua Pang
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Lijie Ma
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Jianxiu Su
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Zhankui Wang.

Ethics declarations

Ethics approval

Not applicable.

Consent to participate

All authors agree to participate.

Consent for publication

All authors agree to publication.

Competing interests

The authors declare no competing interests.

Additional information

Publisher's note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, Z., Zheng, Y., Wang, Z. et al. Effect of particle size on friction signal characters when lapping quartz glass with fixed abrasive pad. Int J Adv Manuf Technol 124, 1591–1606 (2023). https://doi.org/10.1007/s00170-022-10589-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-022-10589-2

Keywords

Search

Navigation