Abstract
Friction stir welding (FSW) of non-linear joints receives an increasing interest from several industrial sectors like automotive, urban transport and aerospace. A force-controlled robot is particularly suitable for welding complex geometries in lightweight alloys. However, complex geometries including three-dimensional joints, non-constant thicknesses and heat sinks such as clamps cause varying heat dissipation in the welded product. This will lead to changes in the process temperature and hence an unstable FSW process with varying mechanical properties. Furthermore, overheating can lead to a meltdown, causing the tool to sink down into the workpiece. This paper describes a temperature controller that modifies the spindle speed to maintain a constant welding temperature. A newly developed temperature measurement method is used which is able to measure the average tool temperature without the need for thermocouples inside the tool. The method is used to control both the plunging and welding operation. The developments presented here are applied to a robotic FSW system and can be directly implemented in a production setting.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Thomas WM, Nicholas ED, Needham JC, Murch MG, Temple-Smith P, Dawes CJ (1991) Friction stir butt welding. GB Patent No. 9125978.8, International patent application No. PCT/GB92/02203
Lienert TJ, Stellwag WL, Grimmett BB, Warke RW (2003) Friction stir welding studies on mild steel. Weld J 82:1–9
Sato YS, Arkom P, Kokawa H, Nelson TW, Steel RJ (2008) Effect of microstructure on properties of friction stir welded Inconel Alloy 600. Mater Sci Eng, A 477(1–2):250–258. doi:10.1016/j.msea.2007.07.002
Cater S, Martin J, Galloway A, McPherson N (2013) Comparison between friction stir and submerged arc welding applied to joining DH36 and E36 shipbuilding steel. Friction Stir Welding and Processing VII. doi:10.1002/9781118658345.ch6
De Backer J, Christiansson AK, Oqueka JM, Bolmsjö G (2012) Investigation of path compensation methods for robotic friction stir welding. Industrial Robot: An International Journal 39(6):601–608. doi:10.1108/01439911211268813
Cook GE, Crawford R, Clark DE, Strauss AM (2004) Robotic friction stir welding. Industrial Robot: An International Journal 31(1):55–63 doi:10.1108/01439910410512000
Soron M (2007) Robot system for flexible 3D friction stir welding. Örebro University, Örebro
Smith C (2000) Friction stir welding using a standard industrial robot. In: 2nd International friction stir welding symposium, Gothenburg, Sweden,
Von Strombeck A, Schilling C, Dos Santos JF (2000) Robotic friction stir welding—tool technology and applications. In: 2nd International friction stir welding symposium, Gothenburg, Sweden, TWI
Shi J, Wang Y, Zhang G, Ding H (2013) Optimal design of 3-DOF PKM module for friction stir welding. Int J Adv Manuf Technol 66(9–12):1879–1889 doi:10.1007/s00170-012-4467-7
Longhurst W, Strauss A, Cook G, Fleming P (2010) Torque control of friction stir welding for manufacturing and automation. Int J Adv Manuf Technol 51(9):905–913. doi:10.1007/s00170-010-2678-3
Davis TA, Ngo PD, Shin YC (2012) Multi-level fuzzy control of friction stir welding power. Int J Adv Manuf Technol 59(5–8):559–567. doi:10.1007/s00170-011-3522-0
Chao YJ, Qi X, Tang W (2003) Heat transfer in friction stir welding—experimental and numerical studies. J Manuf Sci Eng 125(1):138–145 doi:10.1115/1.1537741
Schmidt H, Hattel J (2005) Modelling heat flow around tool probe in friction stir welding. Science and Technology of Welding and Joining 10(2):176–186. doi:10.1179/174329305x36070
Cederqvist L, Garpinger O, Hägglund T, Robertsson A (2012) Cascade control of the friction stir welding process to seal canisters for spent nuclear fuel. Control Eng Pract 20(1):35–48. doi:10.1016/j.conengprac.2011.08.009
Smith C, Schroeder K (2012) An automated path planning and programming system with real-time adaptive control for friction stir processing of cast surfaces. In: 9th international friction stir welding symposium, Huntsville (AL), USA
Fehrenbacher A, Duffie NA, Ferrier NJ, Pfefferkorn FE, Zinn MR (2011) Toward automation of friction stir welding through temperature measurement and closed-loop control. J Manuf Sci Eng 133(5):051008. doi:10.1115/1.4005034
De Backer J, Bolmsjö G (2013) Thermoelectric method for temperature measurement in friction stir welding. Science and Technology of Welding and Joining. doi:10.1179/1362171813Y.0000000135
Lennartson B (2002) Reglerteknikens grunder. Studentlitteratur, Lund
Martin PM (2011) Introduction to surface engineering and functionally engineered materials. Scrivener, Hoboken
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.
About this article
Cite this article
De Backer, J., Bolmsjö, G. & Christiansson, AK. Temperature control of robotic friction stir welding using the thermoelectric effect. Int J Adv Manuf Technol 70, 375–383 (2014). https://doi.org/10.1007/s00170-013-5279-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-5279-0