Abstract
A numerical model based on fluid dynamics theory and electromagnetic theory is developed to simulate the dynamic metal transfer process in tandem gas metal arc welding (T-GMAW). The relationship between welding current and surface tension coefficient is modified by analysis of regression in this model. The numerical simulation of the metal transfer process in T-GMAW is compared with that in single-wire gas metal arc welding (SW-GMAW). It is found that a droplet transfers axially in SW-GMAW, but the droplets transfer non-axially in T-GMAW. To verify the accuracy of simulated results, the welding experiments were performed in which the actual metal transfer processes were recorded by high-speed photography. The simulated results are in good agreement with the experimental ones. This transfer behavior in T-GMAW is analyzed by studying the distributions of physical quantities including pressure, velocity, and electric potential of the droplet. The simulated results reveal that the electromagnetic force between two droplets results in the different metal transfer process. With the increase of the welding current, the surface tension coefficient decreases and the electromagnetic force increases. As a consequence, the metal transfer process in T-GMAW is accelerated.
Similar content being viewed by others
References
Ogino Y, Hirata Y, Nomura K (2011) Numerical analysis of the heat source characteristics of a two-electrode TIG arc. J Phys D: Appl Phys 44:215202
Ueyama T, Ohnawa T, Tanaka M, Nakata K (2007) Occurrence of arc interaction in tandem pulsed gas metal arc welding. Sci Technol Weld Join 12:523–529
Fang CF, Meng XH, Hu QX, Wang FJ, Ren H, Wang HS, Guo Y, Mao M (2012) TANDEM and GMAW twin wire welding of Q690 steel used in hydraulic support. J Iron Steel Res Int 19:79–85
Schnick M, Wilhelm G, Lohse M, Fussel U, Murphy AB (2011) Three-dimensional modelling of arc behaviour and gas shield quality in tandem gas–metal arc welding using anti-phase pulse synchronization. J Phys D: Appl Phys 44:185205
Meng QG, Fang HY, Yang JG, Ji SD (2005) Analysis of temperature and stress field in Al alloy’s twin wire welding. Theor Appl Fract Mec 44:178–186
Choi JH, Lee JY, Yoo CD (2001) Simulation of dynamic behavior in a GMAW system. Weld J 80(10):239–245, Welding Research Supplement to the Welding Journal
Tipi AD (2010) The study on the drop detachment for automatic pipeline GMAW system: short-circuit mode. Int J Adv Manuf Technol 50:149–161
Arif N, Lee JH, Yoo CD (2008) Modelling of globular transfer considering momentum flux in GMAW. J Phys D 41:195503
Choi JH, Lee J, Yoo CD (2001) Dynamic force balance model for metal transfer analysis in arc welding. J Phys D 34:2658–2664
Tipi AD (2010) The study on the drop detachment for automatic pipeline GMAW system: free flight mode. Int J Adv Manuf Technol 50:137–147
Wu CS, Chen MA, Li SK (2004) Analysis of excited droplet oscillation and detachment in active control of metal transfer. Comput Mater Sci 31:147–154
Chen MA, Wu CS, Li SK, Zhang YM (2007) Analysis of active control of metal transfer in modified pulsed GMAW. Sci Technol Weld Join 12:10–14
Ersoy U, Kannatey-Asibu E, Hu SJ (2008) Analytical modeling of metal transfer for GMAW in the globular mode. J Manuf Sci E-T ASME 130:061009
Simpson SW (2009) Metal transfer instability in gas metal arc welding. Sci Technol Weld Join 14:262–273
Yudodibroto BYB, Hermans MJM, Hirata Y, den Ouden G, Richardson IM (2006) Pendant droplet oscillation during GMAW. Sci Technol Weld Join 11:308–314
Hu J, Tsai HL (2006) Effects of current on droplet generation and arc plasma in gas metal arc welding. J Phys D 100:053304
Hu J, Tsai HL (2007) Metal transfer and arc plasma in gas metal arc welding. J Heat Tans-T ASME 129:1025–1035
Wang F, Hou WK, Hu SJ, Kannatey-Asibu E, Schultz WW, Wang PC (2003) Modelling and analysis of metal transfer in gas metal arc welding. J Phys D 36:1143–1152
Quinn TP, Szanto M, Gilad I, Shai I (2005) Coupled arc and droplet model of GMAW. Sci Technol Weld Join 10:113–119
Xu G, Hu J, Tsai HL (2009) Three-dimensional modeling of arc plasma and metal transfer in gas metal arc welding. Int J Heat Mass Tran 52:1709–1724
Wang G, Huang PG, Zhang YM (2003) Numerical analysis of metal transfer in gas metal arc welding. Metall Mater Trans B 34B:345–353
Praveen P, Kang MJ, Yarlagadda PKDV (2008) Drop transfer mode prediction in pulse GMAW of aluminum using statistical model. J Mater Process Tech 201:502–506
Semenov O, Demchenko V, Krivtsun I, Reisgen U, Mokrov O, Zabirov A (2012) A dynamic model of droplet formation in GMA welding. Modelling Simul Mater Sci Eng 20:045003
Shao Y, Wang ZZ, Zhang YM (2011) Monitoring of liquid droplets in laser-enhanced GMAW. Int J Adv Manuf Technol 57:203–214
Wang XW, Huang Y, Zhang YM (2013) Droplet transfer model for laser-enhanced GMAW. Int J Adv Manuf Technol 60:207–217
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ding, X., Li, H., Yang, L. et al. Numerical simulation of metal transfer process in tandem GMAW. Int J Adv Manuf Technol 69, 107–112 (2013). https://doi.org/10.1007/s00170-013-4999-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-4999-5