Abstract
Waste of the forestry and forest products industry, such as pine bark and pine cones, is an important problem for logging, lumbering and paper industries. The objective of this study is to determine some physical properties and the thermal insulation capacity of composites produced from Calabrian pine (Pinus brutia Ten.) bark and cones. For this purpose, 15 types of bio-composite boards, which were in honeycomb form and had 3 layers, were manufactured. Pine barks and cones with fine, middle and coarse particles were used with expanded perlite in ratios of 10%, 20% and 30% of the total volume. Urea-formaldehyde resin was used as a binder that contained boric acid and paraffin. The boards were produced using a honeycomb-designed aluminum mold. The average values of moisture content, density, short-term water absorption by partial immersion, long-term water absorption by immersion, water vapor resistance factor, and thermal conductivity were 10.60%, 269.70 kg/m3, 14.28%, 104.19%, 5.75 and 0.128 W/mK, respectively. All the samples showed excellent fire resistance and behaved as a nonflammable material during the reaction-to-fire testing. According to the findings, it can be said that bark and cone can be used in thermal insulation boards designed in honeycomb form.
Similar content being viewed by others
References
Amaro AM, Reis PNB, Ivañez I, Sánchez-Saez S, Garcia-Castillo SK, Barbero E (2020) The high-velocity impact behaviour of kevlar composite laminates filled with cork powder. Appl Sci 10:1–12. https://doi.org/10.3390/app10176108
Andres Y, Dumont E, Le Cloirec P, Ramirez-Lopez E (2006) Wood bark as packing material in a biofilter used for air treatment. Environ Technol 27:1297–1301. https://doi.org/10.1080/09593332708618747
Andrzejewski J, Szostak M, Barczewski M, Łuczak P (2019) Cork-wood hybrid filler system for polypropylene and poly(lactic acid) based injection molded composites. Structure evaluation and mechanical performance. Compos Part B Eng 163:655–668. https://doi.org/10.1016/j.compositesb.2018.12.109
Arrakhiz FZ, Benmoussa K, Bouhfid R, Qaiss A (2013) Pine cone fiber/clay hybrid composite: mechanical and thermal properties. Mater Des 50:376–381. https://doi.org/10.1016/j.matdes.2013.03.033
Arrakhiz FZ, El Achaby M, Benmoussa K, Bouhfid R, Essassi EM, Qaiss A (2012) Evaluation of mechanical and thermal properties of Pine cone fibers reinforced compatibilized polypropylene. Mater Des 40:528–535. https://doi.org/10.1016/j.matdes.2012.04.032
Audenaert A, De Cleyn SH, Vankerckhove B (2008) Economic analysis of passive houses and low-energy houses compared with standard houses. Energy Policy 36:47–55. https://doi.org/10.1016/j.enpol.2007.09.022
Avci E, Acar M, Gonultas O, Candan Z (2018) Manufacturing biocomposites using black pine bark and oak bark. BioResources 13:15–26. https://doi.org/10.15376/biores.13.1.15-26
Aydın İ, Demirkır C, Colak S, Colakoğlu G (2017) Utilization of bark flours as additive in plywood manufacturing. Eur J Wood Prod 75:63–69. https://doi.org/10.1007/s00107-016-1096-0
Ayrilmis N, Buyuksari U, Avci E, Koc E (2009) Utilization of pine (Pinus pinea L.) cone in manufacture of wood based composite. For Ecol Manage 259:65–70. https://doi.org/10.1016/j.foreco.2009.09.043
Baştürk BS, Kanbur K, Polatoğlu İ, Yürekli Y (2015) Mechanical properties of acorn and pine cone filled polymer composites. Am Sci Res J Eng Technol Sci 14:144–153
Barbu MC (2011) Current developments in the forestry and wood industry. Pro Ligno 8:89–99
Behnamfard A, Alaei R, Chegni K, Veglio F (2019) Removal of free cyanide from aqueous solutions by pine cone scale (PCS). Desalin Water Treat 153:121–129. https://doi.org/10.5004/dwt.2019.23747
Bekhta P, Sedliačik J, Noshchenko G, Kačík F, Bekhta N (2021) Characteristics of beech bark and its effect on properties of UF adhesive and on bonding strength and formaldehyde emission of plywood panels. Eur J Wood Prod 79:423–433. https://doi.org/10.1007/s00107-020-01632-8
Berge B (2009) The ecology of building materials, second. Architectural Press, Oxford
Berlizov AN, Blum OB, Filby RH, Malyuk IA, Tryshyn VV (2007) Testing applicability of black poplar (Populus nigra L.) bark to heavy metal air pollution monitoring in urban and industrial regions. Sci Total Environ 372:693–706. https://doi.org/10.1016/j.scitotenv.2006.10.029
Blanchet P, Cloutier A, Riedl B (2000) Particleboard made from hammer milled black spruce bark residues. Wood Sci Technol 34:11–19. https://doi.org/10.1007/s002260050003
Böhm P, Wolterbeek H, Verburg T, Musílek L (1998) The use of tree bark for environmental pollution monitoring in the Czech Republic. Environ Pollut 102:243–250. https://doi.org/10.1016/s0269-7491(98)00082-7
Borysiuk P, Boruszewski P, Auriga R, Danecki L, Auriga A, Rybak K, Nowacka M (2021) Influence of a bark-filler on the properties of PLA biocomposites. J Mater Sci 56:9196–9208. https://doi.org/10.1007/s10853-021-05901-6
Busquets-Ferrer M, Czabany I, Vay O, Gindl-Altmutter W, Hansmann C (2021) Alkali-extracted tree bark for efficient bio-based thermal insulation. Constr Build Mater 271:121577. https://doi.org/10.1016/j.conbuildmat.2020.121577
Buyuksari U, Ayrilmis N, Avci E, Koc E (2010) Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones. Bioresour Technol 101:255–259. https://doi.org/10.1016/j.biortech.2009.08.038
Cetiner I, Shea AD (2018) Wood waste as an alternative thermal insulation for buildings. Energy Build 168:374–384. https://doi.org/10.1016/j.enbuild.2018.03.019
Chen H, Yan N (2018) Application of Western red cedar (Thuja plicata) tree bark as a functional filler in pMDI wood adhesives. Ind Crops Prod 113:1–9. https://doi.org/10.1016/j.indcrop.2018.01.005
Cherki AB, Remy B, Khabbazi A, Jannot Y, Baillisc D (2014) Experimental thermal properties characterization of insulating cork-gypsum composite. Constr Build Mater 54:202–209. https://doi.org/10.1016/j.conbuildmat.2013.12.076
Cutillas-Barreiro L, Ansias-Manso L, Fernández-Calviño D, Arias-Estévez M, Nóvoa-Muñoz JC, Fernández-Sanjurjo MJ, Álvarez-Rodríguez E, Núñez-Delgado A (2014) Pine bark as bio-adsorbent for Cd, Cu, Ni, Pb and Zn: batch-type and stirred flow chamber experiments. J Environ Manage 144:258–264. https://doi.org/10.1016/j.jenvman.2014.06.008
Dalahmeh SS, Pell M, Vinnerås B, Hylander LD, Öborn I, Jönsson H (2012) Efficiency of bark, activated charcoal, foam and sand filters in reducing pollutants from greywater. Water Air Soil Pollut 223:3657–3671. https://doi.org/10.1007/s11270-012-1139-z
Dawood S, Sen TK, Phan C (2017) Synthesis and characterization of slow pyrolysis pine cone bio-char in the removal of organic and inorganic pollutants from aqueous solution by adsorption: kinetic, equilibrium, mechanism and thermodynamic. Bioresour Technol 246:76–81. https://doi.org/10.1016/j.biortech.2017.07.019
de Avila Delucis R, Fischer Kerche E, Gatto DA, Esteves WLM, Petzhold CL, Amico SC (2019) Surface response and photodegradation performance of bio-based polyurethane-forest derivatives foam composites. Polym Test 80:106102. https://doi.org/10.1016/j.polymertesting.2019.106102
FAO (2021) Forestry Production and Trade. Food and agriculture organization of The United Nations http://www.fao.org/faostat/en/#data/FO. Accessed 21 May 2021
Ferreira R, Pereira D, Gago A, Proença J (2016) Experimental characterisation of cork agglomerate core sandwich panels for wall assemblies in buildings. J Build Eng 5:194–210. https://doi.org/10.1016/j.jobe.2016.01.003
Guo Y, Liu D, Chen Y, Zhang T, Zhu S (2019) Preparation and properties of carbon-fiber- and pine-cone-fiber-reinforced high-density polyethylene composites. J Appl Polym Sci 136:1–7. https://doi.org/10.1002/app.47304
Gupta G, Yan N, Feng MW (2011) Effects of pressing temperature and particle size on bark board properties made from beetle-infested lodgepole pine (Pinus contorta) barks. For Prod J 61:478–488. https://doi.org/10.13073/0015-7473-61.6.478
Hernández-Olivares F, Bollati MR, Del Rio M, Parga-Landa B (1999) Development of cork-gypsum composites for building applications. Constr Build Mater 13:179–186. https://doi.org/10.1016/S0950-0618(99)00021-5
Holmberg A, Wadsö L, Stenström S (2016) Water vapor sorption and diffusivity in bark. Dry Technol 34:150–160. https://doi.org/10.1080/07373937.2015.1023310
Hoong YB, Paridah MT, Loh YF, Jalaluddin H, Chuah LA (2011) A new source of natural adhesive: Acacia mangium bark extracts co-polymerized with phenol-formaldehyde (PF) for bonding Mempisang (Annonaceae spp.) veneers. Int J Adhes Adhes 31:164–167. https://doi.org/10.1016/j.ijadhadh.2010.12.002
Jha K, Tyagi YK, Singh Yadav A (2018) Mechanical and thermal behaviour of biodegradable composites based on polycaprolactone with pine cone particle. Sadhana - Acad Proc Eng Sci 43:1–5. https://doi.org/10.1007/s12046-018-0822-1
Kain G, Barbu M-C, Richter K, Plank B, Tondi G, Petutschnigg A (2015) Use of tree bark as insulation material. For Prod J 65:16–25
Kain G, Barbu MC, Hinterreiter S, Richter K, Petutschnigg A (2013a) Using bark as a heat insulation material. BioResources 8:3718–3731. https://doi.org/10.15376/biores.8.3.3718-3731
Kain G, Barbu MC, Petutschnigg A (2013b) Softwood bark for modern composites. Pro Ligno 9:460–468
Kain G, Barbu MC, Teischinger A, Musso M, Petutschnigg A (2012) Substantial bark use as insulation material. For Prod J 62:480–487. https://doi.org/10.13073/FPJ-D-12-00052.1
Kain G, Güttler V, Barbu MC, Petutschnigg A, Richter K, Tondi G (2014) Density related properties of bark insulation boards bonded with tannin hexamine resin. Eur J Wood Prod 72:417–424. https://doi.org/10.1007/s00107-014-0798-4
Kain G, Lienbacher B, Barbu MC, Senck S, Petutschnigg A (2018) Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling. Constr Build Mater 164:308–316. https://doi.org/10.1016/j.conbuildmat.2017.12.212
Kavci E (2021) Malachite green adsorption onto modified pine cone: Isotherms, kinetics and thermodynamics mechanism. Chem Eng Commun 208:318–327. https://doi.org/10.1080/00986445.2020.1715961
Khuntia T, Biswas S (2020) Characterization of a Novel Natural Filler from Sirisha Bark. J Nat Fibers 00:1–10. https://doi.org/10.1080/15440478.2020.1838997
Kolář V, Tichý M, Müller M (2019) Mechanical properties of polymeric composite based on pine seeds production residues. Manuf Technol 19:426–430. https://doi.org/10.21062/ujep/308.2019/a/1213-2489/MT/19/3/426
Korjenic A, Petránek V, Zach J, Hroudová J (2011) Development and performance evaluation of natural thermal-insulation materials composed of renewable resources. Energy Build 43:2518–2523. https://doi.org/10.1016/j.enbuild.2011.06.012
La Rosa AD, Recca A, Gagliano A, Summerscales J, Latteri A, Cozzo G, Cicala G (2014) Environmental impacts and thermal insulation performance of innovative composite solutions for building applications. Constr Build Mater 55:406–414. https://doi.org/10.1016/j.conbuildmat.2014.01.054
Limam A, Zerizer A, Quenard D, Sallee H, Chenak A (2016) Experimental thermal characterization of bio-based materials (Aleppo Pine wood, cork and their composites) for building insulation. Energy Build 116:89–95. https://doi.org/10.1016/j.enbuild.2016.01.007
Matouq M, Saleh M, Al-Ayed O, El-Hasan T, Hiroshi Y, Tagawa T (2021) Biosorption of chromium and nickel from aqueous solution using pine cones, eucalyptus bark, and moringa pods: a comparative study. Water Pract Technol 16:72–82. https://doi.org/10.2166/wpt.2020.096
Mirski R, Kawalerczyk J, Dziurka D, Siuda J, Wieruszewski M (2020) The application of oak bark powder as a filler for melamine-urea-formaldehyde adhesive in plywood manufacturing. Forests 11:1–12. https://doi.org/10.3390/f11121249
Nemli G, Çolakoǧlu G (2005) Effects of mimosa bark usage on some properties of particleboard. Turkish J Agric For 29:227–230. https://doi.org/10.3906/tar-0404-5
Ofomaja AE, Naidoo EB (2011) Biosorption of copper from aqueous solution by chemically activated pine cone: a kinetic study. Chem Eng J 175:260–270. https://doi.org/10.1016/j.cej.2011.09.103
Pásztory Z, Mohácsiné IR, Gorbacheva G, Börcsök Z (2016) The utilization of tree bark. BioResources 11:7859–7888. https://doi.org/10.15376/biores.11.3.Pasztory
Pásztory Z, Ronyecz I (2013) The thermal insulation capacity of tree bark. Acta Silv Lignaria Hungarica 9:111–117. https://doi.org/10.2478/aslh-2013-0009
Pásztory Z, Ronyecz Mohácsiné I, Börcsök Z (2017) Investigation of thermal insulation panels made of black locust tree bark. Constr Build Mater 147:733–735. https://doi.org/10.1016/j.conbuildmat.2017.04.204
Pinto JRA, Sanches NB, Diniz MF, Santos RS, DE Oliveira JIS, Dutra RCL (2018) Expanded perlite/cork fillers applied to aerospace insulation material. An Acad Bras Cienc 90:3197–3206. https://doi.org/10.1590/0001-3765201820170964
Réh R, Krišťák Ľ, Sedliačik J, Bekhta P, Božiková M, Kunecová D, Vozárová V, Tudor EM, Antov P, Savov V (2021) Utilization of birch bark as an eco-friendly filler in urea-formaldehyde adhesives for plywood manufacturing. Polymers (Basel) 13:1–21. https://doi.org/10.3390/polym13040511
Rudenko BD (2010) Influence of structure on formation of properties of plates from the bark and secondary polyethylene. Moscow State For Univ Bull 4:151–154
Sahin HT, Arslan MB (2011) Weathering performance of particleboards manufactured from blends of forest residues with red pine (Pinus brutia) wood. Maderas Cienc y Tecnol 13:337–346. https://doi.org/10.4067/S0718-221X2011000300009
Sarıcı Özdemir Ç (2019) Equilibrium, kinetic, diffusion and thermodynamic applications for dye adsorption with pine cone. Sep Sci Technol 54:3046–3054. https://doi.org/10.1080/01496395.2019.1565769
Thakur RS, Katoch SS, Modi A (2020) Assessment of pine cone derived activated carbon as an adsorbent in defluoridation. SN Appl Sci 2:1–12. https://doi.org/10.1007/s42452-020-03207-x
TS EN 322 (1999a) Wood-based panels- Determination of moisture content. Turkish Standards Institute, Ankara, Turkey
TS EN 323 (1999b) Wood- Based panels- Determination of density. Turkish Standards Institute, Ankara, Turkey
TS EN 1609 (201) Thermal insulating products for building applications-Determination of short term water absorption by partial immersion. Turkish Standards Institute, Ankara, Turkey
TS EN 13501-1 (2003) Fire classification of construction products and building elements – Part 1: Classification using test data from reaction to fire tests. Turkish Standards Institute, Ankara, Turkey
TS EN 12087 (2013a) Thermal insulating products for building applications-Determination of long term water absorption by immersion. Turkish Standards Institute, Ankara, Turkey
TS EN 12086 (2013b) Thermal insulating products for building applications - Determination of water vapour transmission properties. Turkish Standards Institute, Ankara, Turkey
TS EN 12667 (2013c) Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance. Turkish Standards Institute, Ankara, Turkey
TS EN ISO 11925-2 (2011) Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test. Turkish Standards Institute, Ankara, Turkey
Tsalagkas D, Börcsök Z, Pásztory Z (2019) Thermal, physical and mechanical properties of surface overlaid bark-based insulation panels. Eur J Wood Prod 77:721–730. https://doi.org/10.1007/s00107-019-01436-5
Tudor EM, Barbu MC, Petutschnigg A, Réh R (2018) Added-value for wood bark as a coating layer for flooring tiles. J Clean Prod 170:1354–1360. https://doi.org/10.1016/j.jclepro.2017.09.156
Tudor EM, Dettendorfer A, Kain G, Barbu MC, Réh R, Krišťák L (2020a) Sound-absorption coefficient of bark-based insulation panels. Polymers (Basel) 12(5):1012. https://doi.org/10.3390/POLYM12051012
Tudor EM, Scheriau C, Barbu MC, Réh R, Krišťák Ľ, Schnabel T (2020b) Enhanced resistance to fire of the bark-based panels bonded with clay. Appl Sci 10(16):5594. https://doi.org/10.3390/app10165594
Wesolowski A, Adams MA, Pfautsch S (2014) Insulation capacity of three bark types of temperate Eucalyptus species. For Ecol Manage 313:224–232. https://doi.org/10.1016/j.foreco.2013.11.015
Xing C, Deng J, Zhang SY, Riedl B, Cloutier B (2006) Impact of bark content on the properties of medium density fiberboard (MDF) in four species grown in eastern Canada. For Prod J 56:64–69
Xing C, Zhang SY, Deng J, Wang S (2007) Investigation of the effects of bark fiber as core material and its resin content on three-layer MDF performance by response surface methodology. Wood Sci Technol 41:585–595. https://doi.org/10.1007/s00226-007-0129-6
Yemele MCN, Cloutier A, Diouf PN, Koubaa A, Blanchet P, Stevanovic T (2008) Physical and mechanical properties of particleboard made from extracted black spruce and trembling aspen bark. For Prod J 58:38–46
Zhang Q, Lin X, Chen W, Zhang H, Han D (2020) Modification of rigid polyurethane foams with the addition of nano-SiO2 or lignocellulosic biomass. Polymers (Basel) 12(1):106. https://doi.org/10.3390/polym12010106
Acknowledgements
Thanks to Prof. Dr. Bekir Cihad BAL, Assoc. Prof. Dr. Ertuğrul ALTUNTAŞ and Assoc. Prof. Dr. Kadir KARAKUŞ for their valuable helps.
Funding
This research was supported by the Scientific and Technological Research Council of Turkey (TUBITAK) (Project Number: 217O356).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest The corresponding author states that there is no conflict of interest.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Efe, F.T. Investigation of some physical and thermal insulation properties of honeycomb-designed panels produced from Calabrian pine bark and cones. Eur. J. Wood Prod. 80, 705–718 (2022). https://doi.org/10.1007/s00107-021-01781-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-021-01781-4