Abstract
Ultra-lightweight foam-core fibreboard with 19 mm thickness was produced with a novel one-step process using resinated wood fibres for the faces and expandable polystyrene (EPS) as core layer material. The aim of the current study was to investigate the panel properties produced with different EPS bead diameter (0.5, 1.5, and 2.5 mm) and surface layer thickness (1, 2, 3, 4, and 5 mm). The EPS bead diameter showed a significant effect on the properties of foam-core fibreboard. The most uniform foam with the smallest cell size and highest cell density was observed in panels with smaller EPS beads, which also resulted in a remarkable increase in bending strength and edge screw withdrawal resistance (SWR) of the foam-core panels. Increasing the surface layer thickness from 1 to 5 mm significantly raised the foam-core panels’ density from 220 to 460 kg/m3, respectively. The higher the panel density, the higher the bending properties and the face SWR. The physical properties (thickness swelling and water absorption) of foam-core panels were negatively influenced by thickening of the surface layers. In general, foam-core fibreboards made with smaller EPS beads (0.5 mm) and 3 mm surface layers (density of 340 kg/m3) showed excellent potential for furniture manufacturing due to their acceptable properties according to EN622-5/P1 while still having nearly 55% lower density compared to conventional fibreboard density (750 kg/m3).
Similar content being viewed by others
References
Abina A, Puc U, Jeglič A, Zidanšek A (2013) Structural analysis of insulating polymer foams with terahertz spectroscopy and imaging. Polym Test 32:739–747
Ameli A, Jahani D, Nofar M, Jung PU, Park CB (2014) Development of high void fraction polylactide composite foams using injection molding: mechanical and thermal insulation properties. Compos Sci Technol 90:88–95
Bal BC, Gündeş Z (2020) Surface roughness of medium-density fiberboard processed with CNC machine. Measurement 153:107421
Burnett M, Kharazipour A (2017) Mechanical behaviour of a light- weight three-layered sandwich panel based on the raw material maize. Holzforschung 72:65–70
Chen Z, Hu J, Ju J, Kuang T (2019) Fabrication of poly (butylene succinate)/carbon black nanocomposite foams with good electrical conductivity and high strength by a supercritical CO2 foaming process. Polymers 11:1852
Choupani Chaydarreh K, Shalbafan A, Welling J (2017) Effect of ingredient ratios of rigid polyurethane foam on foam core panels properties. J Appl Polym Sci 134:44722
Chung S-Y, Abd Elrahman M, Stephan D (2018) Effects of expanded polystyrene (EPS) sizes and arrangements on the properties of lightweight concrete. Mater Struct 51:57
Déneši M, Joščák T, Joščák M, Bodnar F, Teischniger A (2012) One press cycle production of fiberboard with unsymmetrically distributed densities. Eur J Wood Prod 70:471–477
Dziurka D, Mirski R, Dukarska D, Derkowski A (2015) Possibility of using the expanded polystyrene and rape straw to the manufacture of lightweight particleboards. Maderas Cienc y Tecnol 17:647–656
Eckelman CA (1975) Screwholding performance in hardwoods and particleboard. For Prod J 25:30–35
FAO (2019) Global forest products facts and figures of 2018. United Nations. http://www.fao.org/3/ca7415en/ca7415en.pdf. Accessed 19 Nov 2019
Gindl W, Teischinger A, Schwanninger M, Hinterstoisser B (2001) The relationship between near infrared spectra of radial wood surfaces and wood mechanical properties. J near Infrared Spectrosc 9:255–261
Halligan AF, Schniewind AP (1972) Effect of moisture on physical and creep properties of particleboard. For Prod J 22:41–48
Jafarnezhad S, Shalbafan A, Luedtke J (2018) Effect of surface layers compressibility and face-to-core-layer ratio on the properties of lightweight hybrid panels. Int Wood Prod J 9:164–170
Kelly MW (1977) Critical literature review of relationships between processing parameters and physical properties of particleboard. US Department of Agriculture, Forest Service, Forest Products Laboratory
Khakzad J, Shalbafan A, Kazemi-Najafi S (2020) Lightweight tubular fiberboard: effect of hole diameters and number on panel properties. Maderas Cienc y Tecnol 22:311–324
Khojasteh-Khosro S, Shalbafan A, Thoemen H (2020a) Consumer behavior assessment regarding lightweight furniture as an environmentally-friendly product. Wood Mater Sci Eng. https://doi.org/10.1080/17480272.2020.1847187
Khojasteh-Khosro S, Shalbafan A, Thoemen H (2020b) Preferences of furniture manufacturers for using lightweight wood-based panels as eco-friendly products. Eur J Wood Prod 78:593–603
Klasterka S (2003) Device and method for dispersing particles in order to form a nonwoven. European Patent Office EP1140447B1:16p
Liu N, Chen B (2014) Experimental study of the influence of EPS particle size on the mechanical properties of EPS lightweight concrete. Constr Build Mater 68:227–232
Luedtke J (2011) Development and evaluation of a concept for the continuous production of lightweight panels comprising a polymer core and wood-based panel facings. PhD Dissertation, Hamburg University, Germany, p 242
Luo S, Gao L, Guo W (2020) Effect of expanded polystyrene content and press temperature on the properties of low-density wood particleboard. Maderas Cienc Tecnol 22:549–558
Mai C, Direske M, Varel D, Weber A (2017) Light medium-density fibreboards (MDFs): does acetylation improve the physico-mechanical properties? Eur J Wood Prod 75:739–745
Miled K, Sab K, Le Roy R (2007) Particle size effect on EPS lightweight concrete compressive strength: Experimental investigation and modelling. Mech Mater 39:222–240
Monteiro S, Martins J, Magalhães FD, Carvalho L (2018) Lightweight wood composites: challenges, production and performance. In: Kalia S (ed) Lignocellulosic composite materials. Springer series on polymer and composite materials. Springer, Cham. https://doi.org/10.1007/978-3-319-68696-7_7
Mosleh Y, Vanden Bosche K, Depreitere B, Sloten JV, Verpoest I, Ivens J (2018) Effect of polymer foam anisotropy on energy absorption during combined shear-compression loading. J Cell Plast 54:597–613
Park S-H, Lee M, Seo P-N, Kang E, Kang C-W (2020) Acoustical properties of wood fiberboards prepared with different densities and resin contents. BioResources 15:5291–5304
Qi C, Zhang F, Mu J, Zhang Y, Yu Z (2020) Enhanced mechanical and thermal properties of hollow wood composites filled with phase-change material. J Clean Prod 256:120373
Research and Markets (2020) Medium density fiberboard (MDF) market. Growth, trends, forecast (2020-2025). https://www.researchandmarkets.com/reports/4622775/medium-density-fiberboard-mdf-market-growth. Accessed May 2020
Schellenberg J, Wallis M (2010) Dependence of thermal properties of expandable polystyrene particle foam on cell size and density. J Cell Plast 46:209–222
Shalbafan A, Welling J (2017) Thermal and acoustic characteristics of innovative foam core particleboards. Wood Fiber Sci 49:73–83
Shalbafan A, Luedtke J, Welling J, Thoemen H (2012a) Comparison of foam core materials in innovative lightweight wood-based panels. Eur J Wood Prod 70:287–292
Shalbafan A, Welling J, Luedtke J (2012b) Effect of processing parameters on mechanical properties of lightweight foam core sandwich panels. Wood Mater Sci Eng 7:69–75
Shalbafan A, Rhême M, Thoemen H (2017) Ultra-light particleboard: characterization of foam core layer by digital image correlation. Eur J Wood Prod 75:43–53
Shalbafan A, Jafarnezhad S, Luedtke J (2018) Evaluation of low density hybrid panels using expandable granules: effect of granules diameter and content. Eur J Wood Prod 76:1505–1514
Shalbafan A, Choupani Chaydarreh K, Welling J (2021) Effect of blowing agent concentration on rigid polyurethane foam and the properties of foam-core particleboard. Wood Mater Sci Eng 16:85–93
Thoemen H, Ruf C (2008) Measuring and simulating the effects of the pressing schedule on the density profile development in wood-based composites. Wood Fiber Sci 40:325–338
Thoemen H, Walther T, Wiegmann A (2008) 3D simulation of macroscopic heat and mass transfer properties from the microstructure of wood fibre networks. Compos Sci Technol 68:608–616
Weinkoetz S (2012) Kaurit-light for lightweight wood-based panels. In: Second symposium on lightweight furniture in Germany, 23–24 May
Wong ED, Zhang M, Han G, Kawai S, Wang Q (2000) Formation of the density profile and its effects on the properties of fiberboard. J Wood Sci 46:202–209
Xie Y, Tong Q, Chen Y, Liu J, Lin M (2011) Manufacture and properties of ultra-low density fibreboard from wood fibre. BioResources 6:4055–4066
Yang C, Zhang Q, Zhang W, Xia M, Yan K, Lu J, Wu G (2021) High thermal insulation and compressive strength polypropylene microcellular foams with honeycomb structure. Polym Degrad Stab 183:109406
Yoon Y (2016) Heat expandable biopolymers for one-step production of foam core sandwich composites. Doctoral dissertation, Swiss Federal Institute of Technology Lausanne (EPFL), Switzerland, p 169
Yoon Y, Smole J, Rhême M, Thoemen H, Christopher P, Jan-Anders EM (2015) Solid state polylactide-poly(methyl methacrylate) precursors for the in-line production of foam core sandwich structures. In: 20th International conference on composite materials, 19–24th July, Copenhagen, Denmark
Zenkert D (1997) An introduction to sandwich construction. Warley, West Midlands Engineering Materials Advisory Services, Ltd. Cradley Heath, United Kingdom
Zhou X, Sethi J, Geng S, Berglund L, Frisk N, Aitomaki Y, Sain MM, Oksman K (2016) Dispersion and reinforcing effect of carrot nanofibers on biopolyurethane foams. Mater Des 110:526–531
Zouzias D, De Bruyne G, Miralbes R, Ivens J (2020) Characterization of the tensile behavior of expanded polystyrene foam as a function of density and strain rate. Adv Eng Mater 22:2000794
Acknowledgements
Saeed Khojasteh-Khosro wants to acknowledge the Leading House for research collaboration with partner institutions in South Asia and Iran in Zurich University of Applied Sciences, Switzerland for the financial support of this study (2019).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Khojasteh-Khosro, S., Shalbafan, A. & Thoemen, H. Development of ultra-light foam-core fibreboard for furniture application. Eur. J. Wood Prod. 79, 1435–1449 (2021). https://doi.org/10.1007/s00107-021-01723-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-021-01723-0