Skip to main content
Log in

Recrystallization microstructure in cold-rolled aluminum composites reinforced by silicon carbide whiskers

  • Published:
Metallurgical Transactions A Aims and scope Submit manuscript

Abstract

Recrystallization behavior has been studied in 50 and 90 pct cold-rolled, silicon carbide whisker-reinforced aluminum composites containing fine aluminum-oxide particles. The micro-structure in the cold-worked state, in the early stage of recrystallization, and after the completion of recrystallization was examined by transmission and scanning electron microscopy and light microscopy. Recrystallization kinetics were studied by microhardness measurement. In the cold-worked state, it was found that the presence of SiC whiskers reduced the cell size, increased the hardness, and altered the distribution of dislocations. During recrystallization, the SiC whis-kers, often present in groups, showed a strong tendency to stimulate nucleation, increasing the number of nuclei and lowering the recrystallization temperature. The recrystallization kinetics in the composite were accelerated; however, the grain refinement effect of SiC was limited, apparently due to the presence of the fine aluminum-oxide particles. The structural observation and kinetics have been discussed and related to results from previous studies of dispersion-strengthened aluminum/aluminum-oxide materials and aluminum of commercial purity.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. A.P. Divecha, S.G. Fishman, and S.D. Karmakar:J. Metals, 1981, vol. 9, pp. 12–17.

    Google Scholar 

  2. T.G. Nieh:Metall. Trans. A, 1984, vol. 15A, pp. 139–46.

    CAS  Google Scholar 

  3. K. Ohori, H. Watanabe, and Y. Takeuchi:Mater. Sci. Tech., 1987, vol. 3, pp. 57–60.

    CAS  Google Scholar 

  4. A. Sakamoto, H. Hasegawa, and Y. Minoda: inProc. 5th Int. Conf. on Composite Materials, ICCMV, W.C. Harrigan, J. Strife, and A.K. Dhingra, eds., TMS-AIME, Warrendale, PA, 1985, pp. 699–707.

    Google Scholar 

  5. T.G. Nieh, R.A. Rainen, and D.J. Chellman: inProc. 5th Int. Conf. on Composite Materials, ICCMV, W.C. Harrigan, J. Strife, and A.K. Dhingra, eds., TMS-AIME, Warrendale, PA, 1985, pp. 825–42.

    Google Scholar 

  6. M.W. Mahoney and A.K. Ghosh:Metall. Trans. A, 1987, vol. 18A, pp. 653–61.

    CAS  Google Scholar 

  7. C. Millière and M. Suéry:Mater. Sci. Tech., 1988, vol. 4, pp. 41–49.

    Google Scholar 

  8. F.J. Humphreys and M. Almas: inAbstracts on Metal Matrix Composites: Structure and Property Assessment, 1987, pp. 17/1–17/3.

  9. M. Almas and F.J. Humphreys:Proc. ICSMA8, Finland, 1988, pp. 1395–400.

  10. F.J. Humphreys:Metal. Sci., 1979, vol. 13, pp. 136–45.

    CAS  Google Scholar 

  11. B. Bay and N. Hansen:Metall. Trans. A, 1979, vol. 10A, pp. 279–88.

    CAS  Google Scholar 

  12. N. Hansen and B. Bay:Acta Metall., 1981, vol. 29, pp. 65–77.

    Article  CAS  Google Scholar 

  13. F.J. Humphreys:Acta Metall., 1977, vol. 25, pp. 1323–44.

    Article  CAS  Google Scholar 

  14. F.J. Humphreys and D. Juul Jensen:Annealing Processes, N. Hansen, D. Juul Jensen, T. Leffers, and B. Ralph, eds., RisØ National Laboratory, Denmark, 1986, pp. 93–106.

    Google Scholar 

  15. D. Juul Jensen, N. Hansen, and F.J. Humphreys:Acta Metall., 1985, vol. 33, pp. 2155–62.

    Article  CAS  Google Scholar 

  16. N. Hansen:Mém. Sci. Rev. Met., 1975, vol. 72, pp. 189–202.

    CAS  Google Scholar 

  17. I. Baker and J.W. Martin:Recrystallization, N. Hansen, A.R. Jones, and T. Leffers, eds., Ris0 National Laboratory, Denmark 1980, pp. 27–33.

    Google Scholar 

  18. H.M. Chan and F.J. Humphreys:Acta Metall., 1984, vol 32, pp. 235–43.

    Article  CAS  Google Scholar 

  19. N. Hansen:Trans. TMS-AIME, 1969, vol. 245, pp. 1305–12.

    CAS  Google Scholar 

  20. W. Normann:Z. Metallkd., 1967, vol. 58, pp. 151–56.

    CAS  Google Scholar 

  21. Atlas Metallographicus, H. Haneman and A. Schrader, eds., Band III, Berliner Zehlendorf Verlag von Gebrüder Bo, 1941.

  22. N. Hansen:Acta Metall, 1969, vol. 18, pp. 137–45.

    Google Scholar 

  23. R.J. Arsenault and N. Shi:Mater. Sci. Eng., 1986, vol. 81 pp. 175–87.

    Google Scholar 

  24. B. Bay and N. Hansen;Deformation of Multi-Phase and Particle Containing Materials, J.B. Bilde-SØrensen, N. Hansen, A. Horsewell, T. Leffers, and H. Lilholt, eds., RisØ National Laboratory, Denmark, 1983, pp. 145–52.

    Google Scholar 

  25. M.F. Ashby:Philos. Mag., 1969, vol. 21, pp. 399–424.

    Article  Google Scholar 

  26. A.R. Jones and N. Hansen:Acta Metall., 1981, vol. 29, pp. 589–99.

    Article  CAS  Google Scholar 

  27. E. Nes:Recrystallization and Grain Growth of Multi-Phase and Particle Containing Materials, N. Hansen, A.R. Jones, and T. Leffers, eds., RisØ National Laboratory, Denmark, 1980, pp. 85–95.

    Google Scholar 

  28. R.D. Doherty:Metal. Sci., 1974, vol. 8, pp. 132–42.

    CAS  Google Scholar 

  29. P. Cotterill and P.R. Mould:Recrystallization and Grain Growth in Metals, Surrey University Press, London, 1976, p. 180.

    Google Scholar 

  30. E. Hornbogen and U. KöstenRecrystallization of Metallic Ma- terials, 2nd ed., F. Haessner, ed., Dr. Riederer Verlag GmbH, Stuttgart, 1978, pp. 159–93.

    Google Scholar 

  31. R. Viswanathan and C.L. Bauer:Acta Metall., 1973, vol. 21, pp. 1099–109.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Liu, Y.L., Hansen, N. & Jensen, D.J. Recrystallization microstructure in cold-rolled aluminum composites reinforced by silicon carbide whiskers. Metall Trans A 20, 1743–1753 (1989). https://doi.org/10.1007/BF02663206

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02663206

Keywords

Navigation