Abstract
Brakeforming is widely applied in high-variety small-batch manufacturing of sheet metal components to form bends that have a straight axis and a constant radius. The process typically involves a relatively large number of set-ups. The paper describes the appropriate search technique to solve the set-up planning problem as well as some of the manufacturing rules that can be applied. Special attention is paid to the accuracy aspect in the selection of set-ups for non-90° bend angles. As an example, the set-up planning procedure is demonstrated for a sheet metal bracket.
Similar content being viewed by others
References
L. J. De Vin, A. H. Streppel and H. J. J. Kals, “The accuracy aspect in set-up determination for sheet bending”, International Journal of Advanced Manufacturing Technology, 11, pp. 179–185, 1996.
L. J. De Vin, A. H. Streppel and H. J. J. Kals, “Tolerancing and sheet bending in small batch part manufacturing”, Annals CIRP, 43(1), pp. 421–424, 1994.
L. J. De Vin, J. De Vries, A. H. Streppel and H. J. J. Kals, “Computer aided process planning for small batch manufacturing of sheet metal components”, Proceedings of the IMC-9 Conference, Dublin, Ireland, pp. 151–160, 1992.
M. Hoffmann, U. Gieβler and M. Geiger, “Computer-aided generation of bending sequences for die-bending machines”, Journal of Material Processing Technology, 30, pp. 1–12, 1992.
R. J. Stamp and C. F. Earl, “Production of sheet metal components by an automatically planned robot assisted press brake”, Proceedings of the International SheMet92 Conference, Birmingham, UK, pp. 211–220, 1992.
M. Shpitalni and D. Sadden, “Automatic determination of bending sequence in sheet metal products”, Annals CIRP, 43(1), pp. 23–26, 1994.
J. Fleischer, Automatische Ermittlung der Abkantreihenfolge, VDI-Z 31(5), pp. 4–46, 1989.
L. J. De Vin, “Computer aided process planning for the bending of sheet metal components”, PhD Thesis, University of Twente, Enschede, 1994.
J. R. Duflou and J. P. Kruth, “A precedence constraint oriented inference engine for bending sequence identification”, Proceedings of the International SheMet97 Conference, Newtownabbey, UK, pp. 93–103, 1997.
J. De Vries, “Integrated process planning for small batch manufacturing of sheet metal components”, PhD Thesis, University of Twente, 1996.
J. Reissner and R. Ehrismann, “Einsatz von Regel- und Algor-ithmenbasierten Verfahren bei der Bestimmung von Biegefolgen”, VDI Berichte, 867, pp. 283–297, 1990.
E. Klaassen, “Bending sequence pre-determination and Collision checking for PART-S”, MSc Thesis, University of Twente, 1993.
S. K. Ong, L. J. De Vin, A. Y. C. Nee and H. J. J. Kals, “Fuzzy set theory applied to set-up sequencing for sheet bending”, International Journal of Materials Processing Technology, 69(1–3), pp. 29–36, 1997.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
De Vin, L.J., Streppel, A.H. Tolerance reasoning and set-up planning for brakeforming. Int J Adv Manuf Technol 14, 336–342 (1998). https://doi.org/10.1007/BF01178912
Issue Date:
DOI: https://doi.org/10.1007/BF01178912