Abstract
A consistent set of general safety criteria has been set up in Italy dealing with fusion machines, considering also the most recent recommendations issued by ICRP. The paper gives a short discussion of the more safety relevant aspects in the design of fusion machines starting from the consideration of the applicable dose limits. The procedure for the licensing of fusion machines is presented in the second part of the paper.
Similar content being viewed by others
References
Associazione EURATOM. ENEA Sulla Fusione, Frascati Tokamak Upgrade, Oct. 1982.
S. Ciattagliaet al. (1990). Preliminary Safety Evaluations for Ignitor, Fusion Technology.
M. Zucchetti and B. Coppi (1992). Neutron Induced Radioactivity in a Compact Ignition Experiment, Fusion Technology.
IAEA—ITER Documentation Series n∘ 36. ITER Safety, Vienna, 1991.
S. J. Piet and S. J. Brereton (1991). Fusion Radioactivity Confinement and Application to Postulated ITER Accidents, INEL-EGG-FSP 9470.
Decreto Del Presidente Della Repubblica, 13 Febbraio 1964, n∘ 185, Sicurezza degli impianti e protezione sanitaria dei lavoratori e delle popolazioni contro i pericoli delle radiazioni ionizzanti derivanti dall'impiego pacifico dell'energia nucleare.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sgalambro, G. Review of safety guidelines and licensing procedures applicable in Italy with regard to fusion machines. J Fusion Energ 12, 183–188 (1993). https://doi.org/10.1007/BF01059376
Issue Date:
DOI: https://doi.org/10.1007/BF01059376