Abstract
The design of precision alloys with specific physical properties and corresponding composites and products is considered. By state-of-the-art methods, not only the physical properties of the steel may be adjusted, but also the reliability of the alloys (and the corresponding composites and components) when operating in critical conditions.
Similar content being viewed by others
References
Pretsizionnye splavy: spravochnik (Precision Alloys: AHandbook), Molotilov, B.V., Ed., Moscow: Metallurgiya, 1983.
Amorfnye splavy. Produktsiya chernoi metallurgii: katalog, TsNIchermet im. I. P. Bardin (Amorphous Alloys: Catalog of Bardin Central Research Institute of Ferrous Metallurgy), Moscow: Chermetinformatsiya, 1989.
Starodubtsev, Yu.N. and Belozerov, V.Ya., Magnitnye svoistva amorfnykh i nanokristallicheskikh splavov (Magnetic Properties of Amorphous and Nanocrystalline Alloys), Yekaterinburg: Ural. Gos. Univ., 2002.
Gritsianov, Yu.A., Putimtsev, B.M., Molotilov, B.V., et al., Metallurgiya pretsizionnykh splavov (Metallurgy of Precision Alloys), Moscow: Metallurgiya, 1975.
Molotilov, B.V., Elyutin, O.P., and Bokshitskii, I.Ya., Composites with specific physical properties, in Metallurgiya stali, splavy, protsessy (Metallurgy of Steel, Alloys, and Processes), Moscow: Metallurgiya, 1982, pp. 184–195.
Molotilov, B.V. and Ababkov, V.T., Reliability of precision alloys, Steel Transl., 2009, vol. 39, no. 12, 1122–1126.
Molotilov, B.V. and Ababkov, V.T., Precision alloys in critical operating conditions, Steel Transl., 2011, vol. 41, no. 10, pp. 879–882.
Molotilov, B.V. and Ababkov, V.T., Standardizing the physical properties of precision alloys, Steel Transl., 2011, vol. 41, no. 10, pp. 537–540.
Molotilov, B.V. and Brodov, A.A., Development, production, and economics of magnetic materials, Steel Transl., 2009, vol. 39, no. 7, pp. 608–611.
Molotilov, B.V., Galkin, M.P., and Kornienkov, B.A., Developing new amorphous and nanocrystalline alloys for electronics, Steel Transl., 2015, vol. 45, no. 5, pp. 390–393.
Ksanfomaliti, L.V., Search for microseisms on the Venus, Kosm. Issled., 1983, vol. 21, no. 3, pp. 355–360.
Molotilov, B.V., D’yakonova, N.B., Vlasova, E.N., and Lyasotskii, I.V., Metallurgical defects at the surface of amorphous strip, Stal’, 2001, no. 8, pp. 101–103.
Pozdnyakov, V.A. and Molotilov, B.V., Analysis of the internal stress in amorphous strip and its buckling, Stal’, 2003, no. 10, pp. 67–69.
Kornienkov, B.A., Molotilov, B.V., Magnetoelastic effects in amorphous alloys, Steel Transl., 2013, vol. 43, no. 3, pp. 157–159.
Molotilov, B.V., Extreme rolling friction, Steel Transl., 2007, vol. 37, no. 4, pp. 398–404.
Sokolov, B.K., Teregudov, N.G., Schastlivtsev, V.M., et al., Aktual’nye voprosy lazernoi obrabotki stalei i splavov (Modern Trends in Laser Treatment of Steels and Alloys), Yekaterinburg: Inst. Fiz. Met., 1994.
Rabkin, L.I. and Shol’ts, N.N., Magnitodielektriki i ferrokatushki (Magnetic Dielectrics and Ferro-Coils), Moscow: Gosenergoizdat, 1948.
Guseva, O.M., Kirillov, S.A., and Semichev, V.S., Magnitomyagkie ferrokompozity na osnove kristallicheskikh i amorfnykh poroshkov: obzory po elektronnoi tekhnike (Magnetic Amorphous Ferrocomposites Based on Crystalline and Amorphous Powders: Reviews on Electronic Engineering), Moscow: Elektronika, 1990, no. 3, pp. 1–44.
Vlasova, E.N., D’yakonova, N.B., Lyasotskii, I.V., et al., Fine structure of magnetic amorphous alloys of Fainmet type, Stal’, 1998, no. 3, pp. 65–69.
Makarov, V.P., Matsuk, V.G., Molotilov, B.V., et al., Interaction of layers in cermet composites, Fiz. Khim. Obrab. Mater., 1976, no. 1, pp. 129–134.
Vlasova, E.N., Molotilov, B.V., and Prokoshin, A.F., Structure of the belts of magnetic amorphous alloys with ceramic coating, Fiz. Met. Metalloved., 1978, vol. 46, no. 6, pp. 1240–1247.
Molotilov, B.V., New trends in the metallurgy of amorphous steel and alloys, Res., Tekhnol., Ekon., 2005, no. 11, pp. 30–33.
Molotilov, B.V., Galkin, M.P., Kornienkov, B.A., Production of amorphous electrical-engineering steel, Steel Transl., 2014, vol. 44, no. 12, pp. 939–941.
Bashnin, Yu.A., Ulanovskii, F.B., Perepelitsa, I.V., and Mosalov, A.N., Termobimetally (Thermostatic Bimetals), Moscow: Mashinostroenie, 1986.
Mazo, Ya.A., Magnitnaya lenta (Magnetic Tape), Moscow: Energiya, 1975.
Lyasotskii, I.V., Molotilov, B.V., and D’yakonova, N.B., Prospects for the development of magnetically soft materials by nanostructuring of fast-quenched Fe and Co alloys, Steel Transl., 2008, vol. 38, no. 10, pp. 881–888.
Molotilov, B.V. and Matorin, V.I., Design of new functional materials, Stal’, 2004, no. 8, pp. 92–94.
Molotilov, B.V., Matorin, V.I., and Fedotov, L.N., Superconducting materials for the electrical industry, Elektrotekh. Prom., Ser.: Elektrotekh. Mater., 1971, no. 10, pp. 16–20.
Jolly, W.P., Cryoelectronics (Introduction Science), London: English Univ. Press, 1972.
Ekimov, V.A., Nizkie temperatury v tekhnike svyazi (Low Temperatures in Communication Engineering), Moscow: Svyaz, 1975.
Robertson, A.G., Quality Control and Reliability, London: Nelson, 1971.
Perrote, A.I., Kartashov, G.D., and Tsvetaev, K.N., Osnovy uskorennykh ispytanii radioelementov na nadezhnost’ (Fundamentals of Accelerated Tests of Radioelements for Reliability), Moscow: Sovetskoe Radio, 1968.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © B.V. Molotilov, M.P. Galkin, B.A. Kornienkov, 2016, published in Stal’, 2016, No. 9, pp. 67–70.
About this article
Cite this article
Molotilov, B.V., Galkin, M.P. & Kornienkov, B.A. Design of new precision alloys. Steel Transl. 46, 675–678 (2016). https://doi.org/10.3103/S0967091216090060
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091216090060