Abstract
For a coil of rolled C86D steel subjected to accelerated continuous cooling from the hot-deformation temperatures, change in austenite grain size by scores no greater than 1–2 according to State Standard GOST 5639–82 has no significant influence on the impact strength. For C86D steel, the impact strength is directly related to the extent of the ferrite–cementite phase boundaries: the impact strength increases with increase in the boundary length. These results are of practical interest in developing new alloys and conditions of deformation and heat treatment for high-strength pearlitic steels.
Similar content being viewed by others
REFERENCES
Uzlov, I.G., Babchenko, A.I., Dement’eva, Zh.A., et al., The influence of the microstructure of the wheel steel on its viscous properties, in Fundamental’nye i prikladnye problemy chernoi metallurgii (Fundamental and Applied Problems of Ferrous Metallurgy), Dnepropetrovsk, 2007, no. 14, pp. 202–210.
Gubenko, S.I. and Parusov, V.V., Deformatsiya metallicheskikh materialov (Deformation of Metal Materials), Dnepropetrovsk: Art-Press, 2006.
Gubenko, S.I. and Parusov, E.V., Plastichnost’ splavov s razlichnoi strukturoi (Plasticity of Alloys with Different Structure), Saarbrücken: Palmarium Academic, 2017.
Bolkhovitinov, N.F., Metallovedenie i termicheskaya obrabotka (Metal Science and Thermal Treatment), Moscow: Mashinostroenie, 1965, 6th ed.
Sychkov, A.B., Parusov, E.V., and Moller, A.B., Tekhnologiya termicheskoi obrabotki armaturnogo i fasonnogo prokata v potoke sortovykh stanov (Teoriya i metallurgicheskaya praktika) (Technology of Thermal Treatment of Reinforcing and Shaped Rolling Products in the Flow of Bar-Rolling Mill: Theory and Metallurgical Practice), Saarbrücken: Palmarium Academic, 2017.
Gubenko, S.I. and Oshkaderov, S.P., Nemetallicheskie vklyucheniya v stali (Nonmetallic Inclusions in Steel), Kyiv: Naukova Dumka, 2016.
Gubenko, S.I., Some structural aspects of wheel steel determining the quality of railway wheels, in Sovremennye tekhnologii proizvodstva transportnogo metalla (Modern Manufacturing Technologies of Transport Metal), Nizhny Tagil: Nizhnetagil’sk. Metall. Kominat, 2008.
Gubenko, S.I., Ivanov, I.A., and Kononov, D.P., Effect of steel quality on the fatigue strength of solid wheels, Zavod. Lab., Diagn. Mater., 2018, vol. 84, no. 3, pp. 52–60.
Vorob’ev, A.A., Gubenko, S.I., and Ivanov, I.A., Resurs i remontoprigodnost’ kolesnykh par podvizhnogo sostava zheleznykh dorog (Resource and Serviceability of Wheel Pairs for Railway Rolling Stock), Moscow: INFRA-M, 2011.
Ivanova, V.S., Botvina, L.R., and Maslov, L.I., Fractographic features of fatigue fractures and fracture viscosity, in Ustalost’ i vyazkost’ razrusheniya metallov (Fatigue and Viscosity of Metal Fracture), Moscow: Nauka, 1974, pp. 79–108.
Parusov, E.V., Parusov, V.V., Sychkov, A.B., et al., Development of thermomechanical treatment of coil rolled products made of steel C86D micro-alloyed with boron, Metall. Min. Ind., 2016, no. 6, pp. 70–74.
Gridnev, V.N., Gavrilyuk, V.G., and Meshkov, Yu.Ya., Prochnost’ i plastichnost’ kholodnodeformirovannoi stali (Durability and Plasticity of Cold Deformed Steel), Kiev: Naukova Dumka, 1974.
Gordeeva, T.A. and Zhegina, I.P., Analiz izlomov pri otsenke nadezhnosti materialov (Analysis of Fractures for Evaluation of Material Reliability), Moscow: Mashinostroenie, 1978.
Stahlfehlerfibel, Leipzig: Deutscher Verlag Grundstoffindustrie, 1975.
Bol’shakov, V.I., Laukhin, D.V., Beketov, A.V., et al., Influence of austenitic grain size on the destruction kinetics of high-strength building steels, Metalloved. Term. Obrab. Met., 2013, no. 4, pp. 31–37.
Meshkov, Yu.Ya. and Pakharenko, G.A., Struktura metalla i khrupkost’ stal’nykh izdelii (Metal Structure and Brittleness of Steel Products), Kiev: Naukova Dumka, 1985.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Parusov, E.V., Gubenko, S.I., Sychkov, A.B. et al. Influence of the Structural Parameters of High-Carbon Steel on the Impact Strength. Steel Transl. 48, 812–817 (2018). https://doi.org/10.3103/S0967091218120100
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091218120100