Abstract
In the present work, the density, ρ, refractive index, nD, and dynamic viscosity, η, for four binary solutions containing ionic liquids [Cnmim]X (Cnmim = 1-alkyl-3-methylimidazolium; n = 6, 8; X = Cl, Br) and ethylene glycol (EG) were investigated at temperatures of 288.15–333.15 K and at ambient pressure. In addition, the excess molar volume, VmE, was calculated and correlated using the Redlich-Kister polynomial equation. The temperature effect on the density of the binary systems studied was expressed by a linear two-parameter equation. The variation in density, refractive index, and viscosity with the composition was described by polynomial equations. The influence of carbon chain-length and the anion of the ionic liquids, and the influence of the temperature on the physicochemical properties of the binary systems can be explained by comparison of the experimental results.
Similar content being viewed by others
References
Azizian, S., & Bashavard, N. (2005). Surface properties of diluted solutions of cyclohexanol and cyclopentanol in ethylene glycol. Journal of Colloid and Interface Science, 282, 428–433. DOI: 10.1016/j.jcis.2004.08.135.
Bahadur, I., Naidoo, Singh, S., Ramjugernath, D., & Deenadayalu, N. (2014). Effect of temperature on density, sound velocity, refractive index and their derived properties for the binary systems (heptanoic acid + propanoic or butanoic acids). The Journal of Chemical Thermodynamics, 78, 7–15. DOI: 10.1016/j.jct.2014.06.004.
Bajic, D. M., Ivaniš, G. R., Visak, Z. P., Živkovic, E. M., Šerbanovic, S. P., & Kijevcanin, M. L. (2013). Densities, viscosities, and refractive indices of the binary systems (PEG200 + 1,2-propanediol, + 1,3-propanediol) and (PEG400 + 1,2-propanediol, + 1,3-propanediol) at (288.15 to 333.15) K and atmospheric pressure: Measurements and modeling. The Journal of Chemical Thermodynamics, 57, 510–529. DOI: 10.1016/j.jct. 2012.07.024.
Blahušiak, M., & Schlosser, Š. (2014). Physical properties of phosphonium ionic liquid and its mixtures with dodecane and water. The Journal of Chemical Thermodynamics, 72, 54–64. DOI: 10.1016/j.jct.2013.12.022.
Carnahan, J. E., Ford, T. A., Gresham, W. F., Grigsby, W. E., & Hager, G. F. (1955). Ruthenium-catalyzed hydrogenation of acids to alcohols. Journal of the American Chemical Society, 77, 3766–3768. DOI: 10.1021/ja01619a025.
Deetlefs, M., Seddon, K. R., & Shara, M. (2006). Neoteric optical media for refractive index determination of gems and minerals. New Journal of Chemistry, 30, 317–326. DOI: 10.1039/b513451j.
Domanska, U., & Marciniak, A. (2004). Solubility of ionic liquid [Emim][PFe] in alcohols. The Journal of Physical Chemistry B, 108, 2376–2382. DOI: 10.1021/jp030582h.
Domanska, U., Papis, P., Szydłsowski, J., Królikowska, M., & Królikowski, M. (2014). Excess enthalpies of mixing, effect of temperature and composition on the density, and viscosity and thermodynamic properties of binary systems of Żammonium-based ionic liquid + alkanediolŽ. The Journal of Physical Chemistry B, 118, 12692–12705. DOI: 10.1021/jp5065243.
Egorov, G. I., Makarov, D. M., & Kolker, A. M. (2010). Densities and volumetric properties of ethylene glycol + dimethyl-sulfoxide mixtures at temperatures of (278.15 to 323.15) K and pressures of (0.1 to 100) MPa. Journal of Chemical & Engineering Data, 55, 3481–3488. DOI: 10.1021/je100089s.
Fic, K., Lota, G., Meller, M., & Frackowiak, E. (2012). Novel insight into neutral medium as electrolyte for high-voltage supercapacitors. Energy & Environmental Science, 5, 5842–5850. DOI: 10.1039/c1ee02262h.
Fredlake, C. P., Crosthwaite, J. M., Hert, D. G., Aki, S. N. V. K., & Brennecke, J. F. (2004). Thermophysical properties of imidazolium-based ionic liquids. Journal of Chemical & Engineering Data, 49, 954–964. DOI: 10.1021/je034261a.
Gómez, E., González, B., Domínguez, Á., Tojo, E., & Tojo, J. (2006). Dynamic viscosities of a series of 1-alkyl-3-methylimidazolium chloride ionic liquids and their binary mixtures with water at several temperatures. Journal of Chemical & Engineering Data, 51, 696–701. DOI: 10.1021/ je050460d.
Gómez, E., Calvar, N., Macedo, E. A., & Domínguez, á. (2012). Effect of the temperature on the physical properties of pure 1-propyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide and characterization of its binary mixtures with alco hols. The Journal of Chemical Thermodynamics, 45, 9–15. DOI: 10.1016/j.jct.2011.08.028.
Gao, H. Y., Qi, F., & Wang, H. J. (2009). Density and volumetric properties of binary mixtures of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate with benzaldehyde at T = (298.15 to 313.15) K. The Journal of Chemical Thermodynamics, 41, 888–892. DOI: 10.1016/j.jct.2009.02.007.
García-Miaja, G., Troncoso, J., & Romaní, L. (2008). Excess properties for binary systems ionic liquid + ethanol: Experimental results and theoretical description using the ERAS model. Fluid Phase Equilibria, 274, 59–67. DOI: 10.1016/j.fluid.2008.09.004
Geppert-Rybczyńska, M., Lehmann, J. K., & Heintz, A. (2014). Physicochemical properties of two 1-alkyl-1-methyl-pyrrolidinium bis[(trifluoromethyl)sulfonyl]imide ionic liquids and of binary mixtures of 1-butyl-1-methylpyrrolidinium bis[(trifluoromethyl)sulfonyl]imide with methanol or acetonitrile. The Journal of Chemical Thermodynamics, 71, 171–181. DOI: 10.1016/j.jct.2013.12.009.
González, B., & González, E. J. (2014). Physical properties of the pure 1-methyl-1-propylpyrrolidinium bis(trifluoromethyl-sulfonyl)imide ionic liquid and its binary mixtures with alcohols. The Journal of Chemical Thermodynamics, 68, 109–116. DOI: 10.1016/j.jct.2013.08.021.
Haghtalab, A., & Shojaeian, A. (2014). Volumetric and viscometric behaviour of the binary systems of N-methyldi-ethanolamine and diethanolamine with 1-butyl-3-methyl-imidazolium acetate at various temperatures. The Journal of Chemical Thermodynamics, 68, 128–137. DOI: 10.1016/j.jct. 2013.09.001.
Kim, Y. H., Choi, Y. K., Park, J. S., Lee, S. M., Yang, Y. H., Kim, H. J., Park, T. J., Kim, Y. H., & Lee, S. H. (2012). Ionic liquid-mediated extraction of lipids from algal biomass. Bioresource Technology, 109, 312–315. DOI: 10.1016/j.biortech.2011.04.064.
Kolbeck, C., Cremer, T., Lovelock, K. R. J., Paape, N., Schulz, P. S., Wasserscheid, P., Maier, F., & Steinruck, H. P. (2009). Influence of different anions on the surface composition of ionic liquids studied using ARXPS. The Journal of Physical Chemistry B, 113, 8682–8688. DOI: 10.1021/jp902978r.
Królikowska, M., Zawadzki, M., & Królikowski, M. (2014). Physicochemical and thermodynamic study on aqueous solutions of dicyanamide–based ionic liquids. The Journal of Chemical Thermodynamics, 70, 127–137. DOI: 10.1016/j.jct. 2013.10.034.
Kumar, A., Singh, T., Gardas, R. L., & Coutinho, J. A. P. (2008). Nonideal behaviour of a room temperature ionic liquid in an alkoxyethanol or poly ethers at T = (298.15 to 318.15) K. The Journal of Chemical Thermodynamics, 40, 32–39. DOI: 10.1016/j.jct.2007.06.002.
Kumar, B., Singh, T., Rao, K. S., Pal, A., & Kumar, A. (2012). Thermodynamic and spectroscopic studies on binary mixtures of imidazolium ionic liquids in ethylene glycol. The Journal of Chemical Thermodynamics, 44, 121–127. DOI: 10.1016/j.jct.2011.08.008.
Li, J. G., Hu, Y. F., Sun, S. F., Liu, Y. S., & Liu, Z. C. (2010). Densities and dynamic viscosities of the binary system (wa-ter+ 1-hexyl-3-methylimidazolium bromide) at different temperatures. The Journal of Chemical Thermodynamics, 42, 904–908. DOI: 10.1016/j.jct.2010.03.002.
McEwen, A. B., McDevitt, S. F., & Koch, V. R. (1997). Non-aqueous electrolytes for electrochemical capacitors: Imida-zolium cations and inorganic fluorides with organic carbonates. Journal of The Electrochemical Society, 144, L84–L86. DOI: 10.1149/1.1837561.
Orchillés, A. V., Miguel, P. J., Vercher, E., & Martínez-Andreu, A. (2009). Using 1-ethyl-3-methylimidazolium tri-fluoromethanesulfonate as an entrainer for the extractive distillation of ethanol + water mixtures. Journal of Chemical & Engineering Data, 55, 1669–1674. sDOI: 10.1021/je900719z.
Pal, A., Gaba, R., Singh, T., & Kumar, A. (2010). Excess thermodynamic properties of binary mixtures of ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) with alkoxyalkanols at several temperatures. Journal of Molecular Liquids, 154, 41–46. DOI: 10.1016/j.molliq.2010. 03.018.
Pal, A., & Kumar, B. (2012). Density, speeds of sound and 1H NMR spectroscopic studies for binary mixtures of 1-hexyl-3-methylimidazolium based ionic liquids with ethy-lene glycol monomethyl ether at temperature from T = (288.15–318.15) K. Fluid Phase Equilibria, 334, 157–165. DOI: 10.1016/j.fluid.2012.08.002.
Pereiro, A. B., Araújo, J. M. M., Esperança, J. M. S. S., Marrucho, I. M., & Rebelo, L. P. N. (2012). Ionic liquids in separations of azeotropic systems–A review. The Journal of Chemical Thermodynamics, 46, 2–28. DOI: 10.1016/j.jct.2011.05.026.
Piñeiro, Á., Brocos, P., Amigo, A., Pintos, M., & Bravo, R. (2000). Prediction of excess volumes and excess surface tensions from experimental refractive indices. Physics and Chemistry of Liquids, 38, 251–260. DOI: 10.1080/003191000 08030275.
Ruiz, V., Huynh, T., Sivakkumar, S. R., & Pandolfo, A. G. (2012). Ionic liquid–solvent mixtures as supercapacitor electrolytes for extreme temperature operation. RSC Advances, 2, 5591–5598. DOI: 10.1039/c2ra20177a.
Saiz, L., Padró, J., & Guàrdia, E. (2001). Structure of liquid ethylene glycol: A molecular dynamics simulation study with different force fields. The Journal of Chemical Physics, 114, 3187–3199. DOI: 10.1063/1.1340605.
Salgado, J., Regueira, T., Lugo, L., Vijande, J., Fernández, J., & García, J. (2014). Density and viscosity of three (2,2,2-trifluoroethanol + 1-butyl-3-methylimidazolium) ionic liquid binary systems. The Journal of Chemical Thermodynamics, 70, 101–110. DOI: 10.1016/j.jct.2013.10.027.
Sastry, N. V., Vaghela, N. M., & Aswal, V. K. (2012). Effect of alkyl chain length and head group on surface active and aggregation behavior of ionic liquids in water. Fluid Phase Equilibria, 327, 22–29. DOI: 10.1016/j.fluid.2012.04.013.
Sastry, N. V., Vaghela, N. M., & Macwan, P. M. (2013). Densities, excess molar and partial molar volumes for water + 1-butyl- or, 1-hexyl- or, 1-octyl-3-methylimidazolium halide room temperature ionic liquids at T = (298.15 and 308.15) K. Journal of Molecular Liquids, 180, 12–18. DOI: 10.1016/j.molliq.2012.12.018.
Singh, T., & Kumar, A. (2008). Physical and excess properties of a room temperature ionic liquid (1-methyl-3-octylimidazolium tetrafluoroborate) with n-alkoxyethanols (C1Em, m = 1 to 3) at T = (298.15 to 318.15) K. The Journal of Chemical Thermodynamics, 40, 417–423. DOI: 10.1016/j.jct.2007.09.011.
Singh, T., & Kumar, A. (2009). Temperature dependence of physical properties of imidazolium based ionic liquids: internal pressure and molar refraction. Journal of Solution Chemistry, 38, 1043–1053. DOI: 10.1007/s10953-009-9429-9.
Tariq, M., Moscoso, F., Deive, F. J., Rodriguez, A., Sanromán, M. A., Esperança, J. M. S. S., Canongia Lopes, J. N., & Rebelo, L. P. N. (2013). Probing the self-aggregation of ionic liquids in aqueous solutions using density and speed of sound data. The Journal of Chemical Thermodynamics, 59, 43–48. DOI: 10.1016/j.jct.2012.11.032.
Torimoto, T., Tsuda, T., Okazaki, K. i., & Kuwabata, S. (2010). New frontiers in materials science opened by ionic liquids. Advanced Materials, 22, 1196–1221. DOI: 10.1002/adma. 200902184.
Vraneš, M., Zec, N., Tot, A., Papović, S., Dožić, S., & Gadžurić, S. (2014). Density, electrical conductivity, viscosity and excess properties of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide + propylene carbonate binary mixtures. The Journal of Chemical Thermodynamics, 68, 98–108. DOI: 10.1016/j.jct.2013.08.034.
Wang, H., Gurau, G., & Rogers, R. D. (2012). Ionic liquid processing of cellulose. Chemical Society Reviews, 41, 1519–1537. DOI: 10.1039/c2cs15311d.
Wetzel, F. H., Miller, J. G., & Day, A. R. (1953). Effect of structure on reactivity. VII. The energies of activation and the entropies of activation for the ammonolysis of esters1. Journal of the American Chemical Society, 75, 1150–1153. DOI: 10.1021/ja01101a042.
Xin, Q., Pfeiffer, K., Prausnitz, J. M., Clark, D. S., & Blanch, H. W. (2012). Extraction of lignins from aqueous–ionic liquid mixtures by organic solvents. Biotechnology and Bioengineering, 109, 346–352. DOI: 10.1002/bit.24337.
Yang, Q. W., Zhang, H., Su, B. G., Yang, Y. W., Ren, Q. L., & Xing, H. B. (2010). Volumetric properties of binary mixtures of 1-butyl-3-methylimidazolium chloride + water or hydrophilic solvents at different temperatures. Journal of Chemical & Engineering Data, 55, 1750–1754. DOI: 10.1021/je900733j.
Yang, Q. W., Yu, K., Xing, H. B., Su, B. G., Bao, Z. B., Yang, Y. W., & Ren, Q. L. (2013). The effect of molecular solvents on the viscosity, conductivity and ionicity of mixtures containing chloride anion-based ionic liquid. Journal of Industrial and Engineering Chemistry, 19, 1708–1714. DOI: 10.1016/j.jiec.2013.02.010.
Young, G., Nippgen, F., Titterbrandt, S., & Cooney, M. J. (2010). Lipid extraction from biomass using co-solvent mixtures of ionic liquids and polar covalent molecules. Separation and Purification Technology, 72, 118–121. DOI: 10.1016/j.seppur.2010.01.009.
Zorȩbski, E., & Waligóra, A. (2008). Densities, excess molar volumes, and isobaric thermal expansibilities for 1,2-ethanediol + 1-butanol, or 1-hexanol, or 1-octanol in the temperature range from (293.15 to 313.15) K. Journal of Chemical & Engineering Data, 53, 591–595. DOI: 10.1021/je700580g.
Author information
Authors and Affiliations
Corresponding authors
Electronic supplementary material
Rights and permissions
About this article
Cite this article
Zhang, YX., Li, SN., Zhai, QG. et al. Physicochemical and excess properties of binary mixtures of (1-alkyl-3-methylimidazoliumchloride/bromide + ethylene glycol) at T = (288.15 to 333.15) K. Chem. Pap. 70, 384–394 (2016). https://doi.org/10.1515/chempap-2015-0211
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1515/chempap-2015-0211