Abstract
This article focuses on an imperfect production inventory model considering product reliability and reworking of imperfect items in three-layer supply chain under fuzzy rough environment. In the model, the supplier receives the raw materials, all are not of perfect quality, in a lot and delivers the items of superior quality to the manufacturer and the inferior quality items are sold at a reduced price in a single batch by the end of the cent percent screening process. The manufacturer produces a mixture of perfect and imperfect quality items. A portion of the imperfect items is transformed into perfect quality items after rework. Another portion of imperfect items, termed as `less perfect quality items', is sold at a reduced price to the retailer, and the portion which cannot be either transformed to the perfect quality items or sold at a reduce price is being rejected. Here, retailer purchases both the perfect and imperfect quality items from the manufacturer to sell the items to the customers through his/her respective showrooms of finite capacities. A secondary warehouse of infinite capacity is hired by the retailer on rental basis to store the excess quantity of perfect quality items. This model considers the impact of business strategies such as optimal order size of raw materials, production rate, and unit production cost in different sectors in a collaborating marketing system that can be used in the industry, like textile, footwear, and electronics goods. An analytical method has been used to optimize the production rate and raw material order size for maximization of the average profit of the integrated model. Finally, a numerical example is given to illustrate the model.
Similar content being viewed by others
Introduction
Business organizations all over the world are striving hard to evolve strategies to survive in the era of competition ushered in by globalization. Supply chain management (SCM) is one such strategy. It is an effective methodology and presents an integrated approach to resolve issues in sourcing customer service, demand flow, and distribution. The focus is on the customer. The results are in the form of reduced operational costs, improved flow of supplies, reduction in delays of production, and increased customer satisfaction. While the goal of supply chain management is to reduce cost of producing and reaching the finished products to the customers, inventory control is the means to achieve the goal. Researchers as well as practitioners in manufacturing industries have given importance to develop inventory control problems in supply chain management. All steps from supply of raw materials to finished products can be included into a supply chain, connecting raw materials supplier, manufacturer, retailer, and finally, customers. Recent reviews on supply chain management are provided by Weng [1], Munson and Rosenblatt [2], Yang and Wee [3], Khouja [4], Yao et al. [5], Chaharsooghi et al. [6], Wang et al. [7], and others.
Nowadays, it is common to all industries that a certain percentage of produced or ordered items are a mixture of perfect and imperfect quality. It is also important to a supply manager of any organization to control and maintain the inventories of perfect and imperfect quality items. Salameh and Jaber [8] developed an inventory model for imperfect quality items using the economic production quantity (EPQ)/economic order quantity (EOQ) formulae and assumed that inferior quality items are sold as a single batch at the end of the total screening process. Thereafter, Goyal and Cardenas-Barron [9] extended the idea of Salameh and Jaber's [8] model and proposed a practical approach to determine EPQ for items with imperfect quality. Yu et al. [10] generalized the models of Salameh and Jaber [8], incorporating deterioration and partial back ordering. Liu and Yang [11] investigated a single-stage production system with imperfect process delivering two types of defects: reworkable and non-reworkable items. The reworkable items are sent for reworking, whereas non-reworkable items are immediately discarded from the system. They determined the optimal lot size that maximized the expected total profit over the expected time length of the production cycle. Panda and Maiti [12] represented a geometric programming approach for multi-item inventory models with price-dependent demand under flexibility and reliability with imprecise space constraint. Ma et al. [13] considered the effects of imperfect production processes and the decision on whether and when to implement a screening process for defective items generated during a production run. Sana [14] develops two inventory models in an imperfect production system and showed that the inferior quality items could be reworked at a cost where overall production inventory costs could be reduced significantly. Sana [15] extended the idea of imperfect production process in three-layer supply chain management system.
Inventory management is generally attracted for large stock for several reasons: an attractive price discount for bulk purchase, the replenishment cost including transportation cost is higher than the inventory related cost, the demand of an item is very high, and so on. Therefore, due to space limitation of showroom, one (or sometimes more than one) warehouse(s) is hired on rental basis to store the excess items. The secondary warehouse (SW) may be located away from the showroom or nearer to the showroom. The actual service to the customer is done at the showroom only. Hartely [16] first introduced the basic two warehouses problem in his book Operations Research - A Managerial Emphasis. After Hartely [16], a number of research papers have been published by different authors. Among them, the work done by Sarma [17], Dave [18], Goswami and Chaudhuri [19], Pakkala and Achary [20], Bhunia and Maiti [21], Benkherouf [22], Zhou [23], Kar et al. [24], and Chung and Huang [25] are worth mentioning. Dey et al. [26] considered a finite-time horizon inventory problem for a deteriorating item having two separate warehouses with interval-valued lead time under inflation and a time value of money. Liang and Zhou [27] investigated a two-warehouse inventory model for deteriorating items under conditionally permissible delay in payments. Hariga [28] proposed an EOQ model with multiple storage facilities where both owned and rented warehouses had limited stock capacity. They assumed the rented warehouse had higher unit holding costs than the own warehouse but offered better preservation resulting in a lower rate of deterioration for the goods than in the own warehouse.
Dubois and Prade [29] first studied the fuzzification problem of rough sets. Furthermore, Morsi and Yakout [30] defined the upper and lower approximations of the fuzzy sets with respect to a fuzzy min-similarity relation. Additionally, Radzikowska and Kerre [31], Xu and Zhou [32], Liu and Sai [33], Chen [34], and others generalized the above definitions of the fuzzy rough set to a more general case. Different types of uncertainty such as randomness, fuzziness, and roughness are common factors in any production inventory problem. But in some problems in production inventory system, both fuzziness and roughness occur simultaneously. In many cases, it is found that some inventory parameters involve both the fuzzy and rough uncertainties. For example, the inventory related costs holding cost, set-up cost, idle costs, etc. depend on several factors such as bank interest, inflation, etc. which are uncertain in fuzzy rough sense. To be more specific, inventory holding cost is sometimes represented by a fuzzy number and it depends on the storage amount which may be imprecise and range within an interval due to several factors such as scarcity of storage space, market fluctuation, and human estimation thought process, i.e., it may be represented by a rough set.
In this paper, a supply chain model consisting of supplier, manufacturer, and retailer has been considered. Here supplier receives the raw materials in a lot and then the superior quality items of the raw materials are sold at a higher price to the manufacturer after the screening the imperfect raw materials as well as inferior quality items of the raw materials are also sold to another manufacturer at a reduced price in a single batch by the end of cent percent screening process. A mixture of perfect and imperfect quality items is produced by the manufacturer. After some rework, some repairable portion of imperfect quality items are transformed into perfect quality items and some of non-repairable portion of imperfect items are sold with reduced price to the retailer. Retailer purchases both perfect and imperfect quality items and sells both items to the customers through his/her respective showrooms of finite capacities at a market place.
It is assumed that the customers' demand is stock dependent and selling price dependent for the perfect quality items and less perfect items, respectively. Since the storage space of the showroom for perfect quality items is limited due to space problem and the demand of the corresponding items is stock dependent, hence a secondary warehouse is hired by the retailer on rental basis to store the excess amount of perfect quality items and these items are continuously transferred to the showroom concerned. The literature suggests that the holding cost of secondary warehouse per unit item per unit time is more than the holding cost of the showroom due to the preservation cost for maintaining the quality of the product and other costs related to holding large quantity of the product in the secondary warehouse. But in this paper, it has been considered that the holding cost of perfect quality items in the secondary warehouse is less than the holding cost of the showroom as the nature of the items are non-deteriorating and so having no preservation cost. The perfect quality items are transported to the showroom via secondary warehouse, and the less perfect quality items are directly transported to the related showroom. For this purpose, transportation cost is incurred to transport both quality items at the respective showrooms from the production center. Due to complexity of environment, inventory holding costs, idle costs, set-up costs, and transportation costs are considered as fuzzy rough type and these are reduced to crisp ones using fuzzy rough expectation. In order to optimize the production rate and raw material order size (the decision variables), the average profit function of the manufacturer is maximized as the manufacturer acts as a leader (Stakelberg approach), and the supplier as well as retailer are the followers of that chain. The decision variables are also optimized by maximizing the integrated average profit function of the chain. Finally, a comparative study has been made between both Stakelberg and integrated approaches. A numerical example is provided to illustrate the feasibility of the model.
Necessary knowledge about fuzzy-rough (Fu-Ro) set
In this section, we discuss some basic concepts, theorems, and lemmas on fuzzy rough theory by Xu and Zhou [32]. These results are crucial for the remainder of this paper.
Definition1.
Xu and Zhou [32] proposed some definitions and discussed some important properties of fuzzy rough variable. Let U be a universe, and X be a set representing a concept. Then, its lower and upper approximation is defined by
Definition2.
The collection of all sets having the same lower and upper approximations is called a rough set, denoted by. The figure of the rough set is depicted in Figure 1.
Example1.
Let ξ focus on the continuous set in the one dimension real space R. There are still some vague sets which cannot be directly fixed and need to be described by the rough approximation. Let set R be the universe, a similarity relation ! is defined asif and only if |a–b|≤10. Let us define for the set [ 20,50], its lower approximationand its upper approximation. Then the upper and lower approximations of the set [ 20,50] make up a rough set ([ 30,40],[ 10,60]) which is the collection of all sets having the same lower approximation [ 30,40] and upper approximation [ 10,60].
Definition3.
A fuzzy rough variable ξ is a fuzzy variable with uncertain parameter ρ∊X, where X is approximated byaccording to the similarity relation R, namely,.
For convenience, we usually denoteexpressing that ρ is in some set A which is approximated byaccording to the similarity relation R, namely,.
Example2.
Let us consider the LR fuzzy variable ξ with the following membership function:
where L(x)=1−x and ρ⊢([ 1,2],[ 0,3]), then ξ is a fuzzy rough variable.
Theorem 1.
If fuzzy rough variablesare defined aswith, for i=1,2,…, m, j=1,2,…, n, t=1,2,3,4, x=(x1, x2,…, x m ), 0≤ci j t 1≤ci j t 2<ci j t 3≤ci j t 4, thenis respectively equivalent to
Proof.
The proof of the theorem is in reference Xu and Zhou [32] in page 308.
Theorem 2.
If fuzzy rough variablesdefined as follows,with,with, for r=1,2,…, p, j=1,2,…, n, t=1,2,3,4, 0≤ar t 1≤ar t 2<ar t 3≤ar t 4, 0≤br t 1≤br t 2<br t 3≤br t 4. Thenis equivalent to
Proof.
The proof of the theorem is in reference Xu and Zhou [32] in page 316.
Lemma1.
Assume that ξ and η are the introduction of variables with finite expected values. Then for any real numbers a and b, we have
Proof.
The proof of the Lemma is in reference Xu and Zhou [32] in page 313.
Single-objective Fu-Ro model
Let us consider the following single-objective decision-making model with fuzzy rough coefficients:
where x is a n-dimensional decision vector, ξ=(ξ1, ξ2, ξ3,…, ξ n ) is a Fu-Ro vector, and f(x, ξ) is objective function. Because of the existence of Fu-Ro vector ξ, problem (3) is not well-defined, that is, the meaning of maximizing f(x, ξ) is not clear and constraints g r (x, ξ)≤0, r=1,2,…, p do not define a deterministic feasible set.
Equivalent crisp model for single-objective problem with Fu-Ro parameters
For the single-objective model with Fu-Ro parameters, we cannot deal with it directly, we should use some tools to make it have mathematical meaning, we then can solve it. In this subsection, we employ the expected value operator to transform the fuzzy rough model into Fu-Ro EVM, i.e., crisp model. Based on the definition of the expected value of fuzzy rough events f(x, ξ), g r (x, ξ) and Theorems 1 and 2, the Fu-Ro EVM is proposed as follows:
where x is the n-dimensional decision vector and ξ is the n-dimensional fuzzy rough variable.
Assumptions and notations
The following notations and assumptions has been used in develop the proposed models.
Notations
For convenience, the following notations are used throughout the entire paper:
Replenishment lot size of the supplier
Production rate for the manufacturer which is also the demand rate of supplier
Screening rate of supplier
Percentage of inferior quality items in each lot received by the supplier
Cycle length of supplier
Total screening time of R units order per cycle
Set-up cost of supplier
Purchase cost per unit item of supplier
Holding cost per unit item for per unit time for supplier
Cost per unit idle time of supplier
Screening cost per unit item
Selling price per unit of superior quality item for supplier
Selling price per unit of inferior quality item for supplier
Percentage of imperfect quality items suitable for rework to make perfect items
Percentage of imperfect items which are suitable for sale through reduction
Inventory level of perfect quality items for the manufacturer at any time t
Inventory level of less perfect quality items for the manufacturer at any time t
Demand rate of the retailer for perfect quality items
Demand rate of the retailer for less perfect quality items
Set-up cost of manufacturer
Holding cost per unit item for per unit time for perfect item in manufacturer
Holding cost per unit item for per unit time for imperfect item in manufacturer
Cost per unit idle time of manufacturer
Inspection cost per unit item for manufacturer
Reworking cost per unit item for manufacturer
Production cost per unit item
Selling price per unit of perfect quality items for manufacturer
Selling price per unit less perfect quality items for manufacturer
Inventory level of perfect quality items for the retailer at any time t
Inventory level of less perfect quality items for the retailer at any time t
Set-up cost for perfect quality items of retailer
Set-up cost for less perfect quality items of retailer
Holding cost per unit item for per unit time of perfect quality items in PW 1 for retailer
Holding cost per unit item for per unit time of perfect quality items for the retailer in secondary ware house
Holding cost per unit item for per unit time of less perfect quality items in PW 2 for retailer
Selling price per unit of perfect quality items for retailer PW 1
Selling price per unit of less perfect quality items for retailer PW 2
Transportation cost perfect item for retailer
Transportation cost of less perfect quality items for retailer
Capacity of secondary warehouse
Capacity of PW j (j=1,2).
Demand rate of customer for perfect quality items PW 1
Demand rate of customer for less perfect quality items PW 2
Denotes the fuzzy rough parameters.
Assumptions
The following assumptions are used throughout the entire paper.
-
(i)
Joint effect of supplier, manufacturer, and retailer is considered in a supply chain management.
-
(ii)
Model is developed for single-item products and lead time is negligible.
-
(iii)
Production rate is a decision variable.
-
(iv)
Demand for perfect quality items is deterministic and function of current stock level.
-
(v)
Replenishment rate of manufacture is instantaneously infinite but its size is finite.
-
(vi)
Unit production cost is a function of production rate.
-
(vii)
The manufacturer has ignored the machine breakdown.
-
(viii)
Cost of idle times of supplier and manufacturer is taken into account.
-
(ix)
Showrooms P W 1 and P W 2 of the retailer are adjacent.
Formulation of three-layer supply chain production inventory model
Block diagram and pictorial representation of the proposed supply chain production inventory model are respectively depicted in Figures 2 and 3. Formulation of the model for supplier, manufacturer, and retailer are given in the subsections `Formulation of the supplier′ `Formulation of the manufacturer,′ and `Formulation of the retailer,′ respectively.
Formulation of the supplier
Here, let R be the lot-size received by the supplier at t=0. A screening process of the lot is conducted at a rate of x units per unit time and t′ be the total screening time of R units. Defective items are kept in stock and sold prior to receiving the next shipment as a single batch at a discounted price ofper unit. R θ is the number of inferior quality items withdrawn from inventory, and t1 is the cycle length of the supplier. The number of superior quality items in each lot, denoted by N(R, θ), is given by
Supplier supplies the superior quality items as raw materials to the manufacturer at a rate P up to the time t1 and to avoid shortages; it is assumed that the number of superior quality items N(r, θ) is at least equal to the demand during screening time t′, i.e.,
Substituting Equation 3 in Equation 4 and replacing t′ by, the value of R is restricted to.
Sales revenue from superior quality items per cycle =ws(R−R θ).
Sales revenue from inferior quality items per cycle.
Procurement cost for the supplier per cycle = (Set-up cost + Purchasing cost) =As+csR.
Screening cost per cycle =scR.
Holding cost during.
Idle time cost per cycle =Ics(T−t1).
Therefore, the average profit (APS) of the supplier during (0, T) is given by
whereand Z is , i=0,1,2,3,4 are independent of R and P. (See Appendix 1).
Formulation of the manufacturer
It is considered that a manufacturer produces some perfect and imperfect quality items at the rate of P units during the period (0, t1), receiving the raw material from the supplier at the same rate P during the period (0, t1). P e−αt and P(1−e−αt) are respectively the expected quantity of perfect and imperfect quality items at any time t, where α be the reliability parameter given by. Among the imperfect quality items, only β P(1−e−αt) units per unit time become perfect quality after reworking and the portion γ(1−β)P(1−e−αt) are less perfect quality which are sold at a reduced price to the retailer. Here Dr anddenote the demand rates of a retailer for perfect quality and less perfect quality items which are met by manufacturer during (0, t2) and, respectively. The production cost C(P) per unit item is considered as, where G be the total labor cost for manufacturing the items, L and H are respectively the material cost and tool/die cost per unit item.
For perfect quality items of manufacturer
The rate of change of inventory level of the manufacturer for perfect quality items can be represented by the following differential equations:
with boundary conditions q1m(t)=0 at t=0 and t=t2.
The solution of above differential equations are given by
From continuity at t=t1, following condition is obtained:
Now holding cost (HCM1) for perfect quality items for manufacture is given by
and reworking cost (RCM) for manufacture:
For less perfect quality items of manufacturer
The rate of change of inventory level of less perfect quality items for manufacturer can be represented by the following differential equations:
with boundary conditions q2m(t)=0 at t=0 and.
The solution of above differential equations are given by
From continuity at t=t1, following condition is obtained:
Now holding cost (HCM 2) for less perfect quality items for manufacture
Production cost for the manufacturer =C(P)P t1.
Inspection cost =IsmP t1.
Holding cost for the manufacturer =[HCM1+HCM2].
Set-up cost of the manufacturer =Am.
Idle time cost for the manufacturer =Icm (T−t2).
Revenue of perfect quality items for the manufacturer.
Revenue of less perfect quality items for the manufacturer.
Average profit of manufacturer
Average profit (APM) of the manufacturer during the period (0, T) is given by
where Z im , i=0,1,2,…,6, are independent of R and P. (See Appendix 1).
Formulation of the retailer
The customers′ demand for both perfect and less perfect quality items are met by the retailer through the adjacent showrooms PW 1 and PW 2, respectively. Retailer has a secondary warehouse SW to store the excess perfect quality items which are continuously transferred to the showroom PW 1. Less perfect quality items are directly transferred to the showroom PW 2. Transportation cost is taken into account to transfer each items from production center to the showrooms.
For perfect quality items of retailer
In this case the demand rate (Dc) of customers at PW 1 has consider as stock dependent as the following form:
Now, the corresponding rate of change of on hand inventory of perfect quality items are given by
with boundary conditions
Therefore, the solutions of above differential equations are given by
Holding cost (HCRW) of the secondary warehouse SW is given by
Holding cost (HCRS 1) of the showroom PW 1 is given by
Transportation cost (TCPR) for perfect quality items of retailer is given by
Revenue from selling perfect quality items is given by
Hence, the total profit of the retailer from the perfect quality items is given by
For less perfect quality items of retailer
In this case demand rateof customers at PW 2 is assumed as selling price dependent defined asand corresponding change of on hand inventory of less perfect quality items are given by
with boundary conditions q2r(t)=0 at t=0 and t=T′. The solution of above differential equations is given by
From continuity condition at,
Also, i.e.,
Holding cost (HCRS 2) of the showroom PW 2 is given by
Transportation cost (TCIR) for less perfect quality items of retailer is given by
Revenue (REIR) from selling less perfect quality items of retailer is given by
Total profit (TPR 2) of retailer for less perfect quality items is given by
Average profit of retailer
Average profit (APR) of the retailer during (0, T) is
where Z ir , i=0,1,…,5 are independent of R and P. (See Appendix 1).
Integrated average profit
Average profit (IAP) for the Integrated Model during (0, T) is
where Z i , i=0,1,…,8 are independent of R and P. (See Appendix 1).
In fuzzy rough environment
In this environment, all holding cost, idle cost, set-up cost, and transportation cost have been considered fuzzy-rough parameters. Then the corresponding fuzzy-rough objective functions for supplier, manufacturer, and retailer are given by
Also, the fuzzy-rough objective functions for integrated model is given by
where fuzzy rough parameters,,,,are defined as follows:
with, 0≤hst1≤hst2<hst3≤hst4,with, 0≤hmt1≤hmt2<hmt3≤hmt4.with,.with, 0≤hrt1≤hrt2<hrt3≤hrt4.with,.with, 0≤hrst1≤hrst2<hrst3≤hrst4.with, 0≤Ast1≤Ast2<Ast3≤Ast4.with, 0≤Amt1≤Amt2<Amt3≤Amt4.with, 0≤Art1≤Art2<Art3≤Art4.with, 0≤Icst1≤Icst2<Icst3≤Icst4.with, 0≤Icmt1≤Icmt2<Icmt3≤Icmt4.with, 0≤ctpt1≤ctpt2<ctpt3≤ctpt4.with,.
In equivalent crisp environment
In this environment, using Lemma 1 and Theorems 1 and 2, the fuzzy rough objective functions for supplier, manufacturer, and retailer are given by
Also, the objective functions for integrated model is given by
where
.
Stakelberg approach (leader-follower relationship)
In this case, the manufacturer is the leader, and the supplier and retailer are the followers. Also, the optimum values of the average profit of supplier and retailer are obtained by putting the optimum value of the decision variables, which are obtained by optimizing the average profit of manufacturer. Using Equations 6, 12a, 12b, and, in Equation 12c, the relationis obtained where t0 is given byand it is independent of R and P.
When both R and P are decision variables
The average profit of manufacturer is given by
where, i=0,1,2,…,6, are independent of R and P. (See Appendix 1).
The necessary conditions for maximum value of EAPM(R, P) areand
Now,
and
Solving (14) and (15), we can obtain the optimum value of R and P, say R* and P*.
Ifandholds for R=R* and P=P*, then EAPM (R*, P*) is maximum.
Now,
and
Therefore, EAPM (R*, P*) is maximum if the relations (16), (17), and (18) hold.
The corresponding optimum average profit of supplier and retailer is
where.
When P is a decision variable
The necessary conditions for maximum value of EAPM(P) is
which gives the optimum value of P, say P**. (See Appendix 2).
Ifholds for P=P**, then EAPM (P**) is maximum.
Therefore, EAPM (P**) is maximum if the relation (18b) holds and the corresponding optimum average profits of supplier and retailer are respectively
where.
Integrated approach
When both R and P are decision variables
The necessary conditions for maximum value of EIAP (R, P) areand
Now,
and
Solving (19) and (20), we can obtain the optimum value of R and P, say R* and P*.
If,andholds for R=R* and P=P* then EIAP (R*, P*) is maximum.
Now,
and
Therefore, IAP (R*, P*) is maximum if the relations (21), (22), and (23) hold and the corresponding optimum integrated average profit of the supply chain is
where.
When P is a decision variable
The necessary conditions for maximum value of EIAP(P) iswhich gives the optimum value of P, say P**.
Ifhold for P=P** then EIAP(P**) is maximum.
Nowgives
Therefore, EIAP (P**) is maximum if the relation (24) holds and the corresponding maximum integrated average profit of the supply chain is
Numerical examples
To illustrate the proposed production inventory model, we consider the following numerical data in Tables 1 and 2.
The optimal values of the decision variables and corresponding profits are given in Tables 3 and 4. Also, sensitivity analysis has been performed of the profits, production rate (P), and inventory level (R) of supplier with respect to different parameters which are shown in Figures 4, 5, 6, 7, 8, 9, 10, 11, 12, and 13.
Discussion
From Tables 1 and 2, it is observed that profits under the integrated approach is greater than the Stakelberg approach and hence the former approach is better than the later approach. The sensitivity analysis in `Numerical examples′ section shows that with increase of the reliability parameter α, (i) the profits of the supplier and retailer are slightly increasing (Figure 6), (i i) the values of P and R are gradually increasing (Figures 4 and 5) but (i i i) both profits of the manufacturer (APM) and the integrated profit (IAP) are gradually decreasing (Figures 6 and 7). From Figures 8, 9, 10, 11, it is also seen that the values of APS and IAP are decreasing, but the initial amount of inventory level of supplier is increasing with increase of θ. It is also noted that the values of APS and IAP increase with the screening rate of the supplier (x).
Conclusions
This paper develops a three-layer supply chain production inventory model involving supplier, manufacturer, and retailer as the members of the chain who are responsible for performing the raw materials into finished product and make them available to satisfy customers′ demand in time. In comparing with the existing literature on the supply chain, the following are the main contributions in the proposed model:
Inspection cost is incurred during the production run time, and the manufacturer continuously inspects as well as separates the perfect quality items, less perfect quality items, repairable items which are transformed into perfect quality items after some rework, and reject items. Reworked cost is considered by the manufacturer to repair a certain percentage of imperfect quality items. The demand rate of the customers for perfect quality items and less perfect quality items are respectively assumed as stock dependent and selling price dependent. Here retailer have two showrooms PW 1 and PW 2 of finite capacities at a busy market place, and the market demands of perfect and less perfect quality items are respectively met through the showrooms PW 1 and PW 2. Retailer has a secondary warehouse SW of infinite capacity, away from busy market place, to store the excess amount perfect quality items from where the items are continuously transferred to the showroom. It is considered that the holding cost per unit per unit time at SW is less than the holding cost at PW 1 per unit per unit time. The repairing costs of corrective and preventive maintenance should also be considered, as these costs increase the unit production cost. Inventory and production decisions are made at the supplier, manufacturer, and retailer levels. Actually in this paper, the coordination between production and inventory decisions has been established across the supply chain so that the integrated average profit of the chain is maximum.
Appendix 1
where
Z2s=Ics(1−θ), Z3s=hs(1−θ)2,
where Z0m=Icmt0−AmZ1m=G(1−θ)
where,
where Z0=(Z0r−Z0m−Z0s), Z1=(Z2s−Z1m), Z2=(Z1s+Z1r+Z2m)Z3=(Z3s+2Z4m+Z2r), Z4=Z3m, Z5=Z6m, Z7=Z4R, Z8=Z5R, Z6=(Z4s−Z3r−Z5m).
Appendix 2
References
Weng ZK: Channel coordination and quantity discounts. Manag. Sci 1999, 41: 1509–1522. 10.1287/mnsc.41.9.1509
Munson LC, Rosenblatt JM: Coordinating a three level supply chain with quantity discounts. IIE Trans 2001, 33: 371–384.
Yang CP, Wee MH: An arborescent inventory model in a supply chain system. Prod. Plann. Control 2001, 12: 728–735. 10.1080/09537280010024063
Khouja M: Optimizing inventory decisions in a multistage multi customer supply chain. Trans. Res. Part E 2003, 39: 193–208. 10.1016/S1366-5545(02)00036-4
Yao Y, Evers PT, Dresner ME: Supply chain integration in vendor-managed inventory. Decis. Support Syst 2007, 43: 663–674. 10.1016/j.dss.2005.05.021
Chaharsooghi SK, Heydari J, Zegordi SH: A reinforcement learning model for supply chain ordering management: an application to the beer game. Decis. Support Syst 2008, 45: 949–959. 10.1016/j.dss.2008.03.007
Wang WT, Wee HM, Tsao HSJ: Revisiting the note on supply chain integration in vendor-managed inventory. Decis. Support Syst 2010, 48: 419–420. 10.1016/j.dss.2009.08.001
Salameh MK, Jaber MY: Economic production quantity model for items with imperfect quality. Int. J. Prod. Econ 2000, 64: 59–64. 10.1016/S0925-5273(99)00044-4
Goyal SK, Cardenas-Barron LE: Note on: economic production quantity model for items with imperfect quality—a practical approach. Int. J. Prod. Econ 2002, 77: 85–87. 10.1016/S0925-5273(01)00203-1
Yu JCP, Wee HM, Chen JM: Optimal ordering policy for a deteriorating item with imperfect quality and partial back ordering. J. Chin. Inst. Ind. Eng 2005, 22: 509–520.
Liu JJ, Yang P: Optimal lot-sizing in an imperfect production system with homogeneous reworkable jobs. Eur. J. Oper. Res 1996, 91: 517–527. 10.1016/0377-2217(94)00339-4
Panda D, Maiti M: Multi-item inventory models with price dependent demand under flexibility and reliability consideration and imprecise space constraint: a geometric programming approach. Math. Comput. Model 2009, 49: 1733–1749. 10.1016/j.mcm.2008.10.019
Ma W-N, Gong D-C, Lin GC: An optimal production cycle time for imperfect production process with scrap. Math. Comput. Model 2010, 52: 724–737. 10.1016/j.mcm.2010.04.024
Sana SS: An economic production lot size model in an imperfect production system. Eur. J. Oper. Res 2010, 201: 158–170. 10.1016/j.ejor.2009.02.027
Sana SS: A production-inventory model of imperfect quality products in a three-layer supply chain. Decis. Support Syst 2011, 50: 539–547. 10.1016/j.dss.2010.11.012
Hartely, RV: Operations Research - a Managerial Emphasis, Good Year Publishing Company, California, pp. 315–317 (1976).
Sarma KVS: A deterministic inventory model with two levels of storage and an optimum release rule. Opsearch 1983, 20: 175–180.
Dave U: On the EOQ models with two levels of storage. Opsearch 1988, 25: 190–196.
Goswami A, Chaudhuri KS: An economic order quantity model for items with two level of storage for a linear trend in demand. J. Oper. Res. Soc 1992, 43: 157–167. 10.1057/jors.1992.20
Pakkala TPM, Achary KK: Discrete time inventory model for deteriorating items with two warehouses. Opsearch 1992, 29: 90–103.
Bhunia AK, Maiti M: A two warehouses inventory model for deteriorating items with a linear trend in demand and shortages. Journal of Operational Research society 2007, 49: 287–292. 10.1057/palgrave.jors.2600512
Benkherouf L: A deterministic order level inventory model for deteriorating items with two storage facilities. Int. J. Prod. Econ 1997, 48: 167–175. 10.1016/S0925-5273(96)00070-9
Zhou YW: An optimal EOQ model for deteriorating items with two warehouses and time varying demand. Mathematica Applicata 1998, 10: 19–23.
Kar SK, Bhunia AK, Maiti M: Deterministic inventory model with levels of storage, a linear trend in demand and a fixed time horizon. Comp. Oper. Res 2001, 28: 1315–1331. 10.1016/S0305-0548(00)00042-3
Chung K, Huang T: The optimal retailer′s ordering policies for deteriorating items with limited storage capacity under trade credit financing. Int. J. Prod. Econ 2007, 106: 127–146. 10.1016/j.ijpe.2006.05.008
Dey JK, Mondal SK, Maiti M: Two storage inventory problem with dynamic demand and interval valued lead-time over finite time horizon under inflation and time-value of money. Eur. J. Oper. Res 2008, 185: 170–194. 10.1016/j.ejor.2006.12.037
Liang Y, Zhou F: A two-warehouse inventory model for deteriorating items under conditionally permissible delay in payment. Appl. Math. Model 2011, 35: 2221–2231. 10.1016/j.apm.2010.11.014
Hariga M: Inventory models for multi-warehouse systems under fixed and flexible space leasing contracts. Comput. Ind. Eng 2011, 61: 744–751. 10.1016/j.cie.2011.05.006
Dubois D, Prade H: Rough fuzzy sets and fuzzy rough sets. Int. J. Gen. Syst 1990, 17: 91–208. 10.1080/03081079008935107
Morsi NN, Yakout MM: Axiomatics for fuzzy rough sets. Fuzzy Set. Syst 1998, 100: 327–342.
Radzikowska AM, Kerre EE: A comparative study of rough sets. Fuzzy Set. Syst 2002, 126: 137–155.
Xu J, Zhou X: Fuzzy-Like Multiple Objective Decision Making. Springer, Berlin; 2009.
Liu G, Sai Y: Invertible approximation operators of generalized rough sets and fuzzy rough sets. Inf. Sci 2010, 180: 2221–2229. 10.1016/j.ins.2010.01.033
Chen D, Kwong S, He Q, Wang H: Geometrical interpretation and applications of membership functions with fuzzy rough set. Fuzzy Set and Syst 2012, 193: 122–135. 10.1016/j.fss.2011.07.011
Acknowledgements
The authors thanks to the reviewers and members of the editorial board for their valuable comments and constructive suggestions to improve the content of this research work.
Author information
Authors and Affiliations
Corresponding author
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Manna, A.K., Dey, J.K. & Mondal, S.K. Three-layer supply chain in an imperfect production inventory model with two storage facilities under fuzzy rough environment. J. Uncertain. Anal. Appl. 2, 17 (2014). https://doi.org/10.1186/s40467-014-0017-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s40467-014-0017-1