Abstract
The selective laser sintering of TiO2-film nanoparticles on a plastic conductive substrate is considered for application in flexible dye-sensitized solar cells. It is shown that the absorbed energy of the laser radiation during laser sintering promotes electrical-contact formation between TiO2 nanoparticles without damaging the plastic conductive substrate. The choice of a near-infrared laser radiation (wavelength of 1064 nm) provides an efficient laser-sintering process. The laser-sintering method promotes a decrease in recombination losses in the TiO2 film and an improvement in the charge-collection efficiency, which can result in an increase in the efficiency of such solar cells. Furthermore, the efficient-laser sintering method has a great potential for application in the roll-to-roll technology of the fabrication of high-efficiency flexible solar cells.
Similar content being viewed by others
References
Ch.-h. Kim, S.-s. Kim, and M.-k. Lee, Appl. Surf. Sci. 270, 462 (2013).
D. Shahrjerdi, S. W. Bedell, C. Bayram, C. Lubguban, K. Fogel, P. Lauro, J. Ott, M. Hopstaken, M. Gayness, and D. Sadana, Adv. Energy Mater. 3, 566 (2013).
A. Hagfeldt, G. Boschloo, L. Sun, L. Kloo, and H. Pettersson, Chem. Rev. 110, 6595 (2010).
Liqun Ming, Huan Yang, Wenjun Zhang, Xianwei Zeng, Dehua Xiong, Zhen Xu, Huan Wang, Wei Chen, Xiaobao Xu, Mingkui Wang, Jun Duan, Yi-Bing Cheng, Jie Zhang, Qiaoliang Bao, Zhanhua Wei, and Shihe Yang, J. Mater. Chem. A 2, 4566 (2014).
J. Lee, J. Yoon, M. Jin, and M. Lee, J. Appl. Phys. 112, 043110 (2012).
J. Yoon, M. Jin, and M. Lee, Adv. Mater. 23, 3974 (2011).
Th. Dittricha, A. Ofir, S. Tirosh, L. Grinis, and A. Zaban, Appl. Phys. Lett. 88, 182110 (2006).
Ashi Ofir, Snir Dor, L. Grinis, A. Zaban, T. Dittrich, and J. Bisquert, J. Chem. Phys. 128, 064703 (2008).
R. M. Pasquarelli, D. S. Ginley, and R. O’Hayre, Chem. Soc. Rev. 40, 5406 (2011).
J. Kim, J. Kim, and M. Lee, Surf. Coat. Technol. 205, 372 (2010).
H. Kim, R. C. Y. Auyeung, M. Ollinger, G. P. Kushto, Z. H. Kafafi, and A. Piqu, Appl. Phys. A 83, 73 (2006).
G. Mincuzzi, L. Vesce, A. Reale, A. di Carlo, and T. M. Brown, Appl. Phys. Lett. 95, 103312 (2009).
S. P. Malyukov and A. V. Sayenko, J. Russ. Laser Res. 34, 531 (2013).
G. Mincuzzi, M. Schulz-Ruhtenberg, L. Vescel, A. Reale, A. di Carlo, A. Gillner, and T. M. Brown, Progr. Photovolt. Res. Appl. 22, 308 (2014).
S. P. Malyukov, A. V. Sayenko, I. V. Kulikova, and Yu. V. Klunnikova, J. Phys.: Conf. Ser. 541, 012060 (2014).
S. P. Malyukov and A. V. Saenko, Izv. Yuzh. Fed. Univ., Tekh. Nauki 1, 120 (2014).
Linyun Liang, Songyuan Dai, Linhua Hu, Fantai Kong, Weiwei Xu, and Kongjia Wang, J. Phys. Chem. B 110, 12404 (2006).
M. A. Pugachevskii, Tech. Phys. Lett. 38, 328 (2012).
Ming-Yi Pu and J. Z. Chen, Mater. Lett. 66, 162 (2012).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.P. Malyukov, A.V. Sayenko, I.A. Kirichenko, 2016, published in Fizika i Tekhnika Poluprovodnikov, 2016, Vol. 50, No. 9, pp. 1220–1224.
Rights and permissions
About this article
Cite this article
Malyukov, S.P., Sayenko, A.V. & Kirichenko, I.A. Laser sintering of a TiO2 nanoporous film on a flexible substrate for application in solar cells. Semiconductors 50, 1198–1202 (2016). https://doi.org/10.1134/S1063782616090153
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063782616090153