Abstract
The main goal of the present research is to analyze tensile fracture in Al 7075-T6 thin plates weakened by blunt V-notches. For this purpose, first, 27 fracture tests are carried out on rectangular plates containing a central rhombic hole with two blunt V-shaped corners horizontally located. The experimental observations indicated that a plastic region initiates from the notch tip and grows as the tensile load monotonically increases, and finally, fracture happens suddenly with a significant opening of the notch tip. By showing significant plastic deformations around the notch tip and also inclined fracture planes, the specimens after fracture confirm well the ductile rupture in V-notched Al 7075-T6 plates. As the main experimental result, the load-carrying capacity of the notched plates corresponding to the onset of crack initiation from the notch tip is recorded. To theoretically predict the experimental results, the equivalent material concept is utilized together with the well-known brittle fracture criterion, namely the averaged strain energy density criterion. Without requiring elastic-plastic finite element analysis, it is shown that the combination of the averaged strain energy density and equivalent material concept is successful in predicting the load-carrying capacity of the V-notched Al 7075-T6 plates that fail by moderate-scale yielding regime.
Similar content being viewed by others
References
Anderson, T.L., Fracture Mechanics: Fundamentals and Applications, Florida: CRC Press LLC, 1995.
Saxena, A., Nonlinear Fracture Mechanics for Engineers, Florida: CRC Press LLC, 1998.
Susmel, L. and Taylor, D., On the Use of the Theory of Critical Distances to Predict Static Failures in Ductile Metallic Materials Containing Different Geometrical Features, Eng. Fract. Mech., 2008, vol. 75, pp. 44104421.
Taylor, D., Predicting the Fracture Strength of Ceramic Materials Using the Theory of Critical Distances, Eng. Fract. Mech., 2004, vol. 71, pp. 2407–2416.
Kasiri, S. and Taylor, D., A Critical Distance Study of Stress Concentrations in Bone, J. Biomech., 2008, vol. 41, pp. 603–609.
Torabi, A.R., Estimation of Tensile Load-Bearing Capacity of Ductile Metallic Materials Weakened by a V-Notch: The Equivalent Material Concept, Mater. Sci. Eng. A, 2012, vol. 536, pp. 249–255.
Torabi, A.R., Ultimate Bending Strength Evaluation of U-Notched Ductile Steel Samples under Large-Scale Yielding Conditions, Int. J. Fract.,2013, vol. 180, pp. 261–268.
Torabi, A.R., The Equivalent Material Concept: Application to Failure of O-Notches, Eng. Solid Mech., 2013, vol. 1, pp. 129–140.
Torabi, A.R., On the Use of the Equivalent Material Concept to Predict Tensile Load-Bearing Capacity of Ductile Steel Bolts Containing V-Shaped Threads, Eng. Fract. Mech., 2013, vol. 97, pp. 136–147.
Ayatollahi, M.R. and Torabi, A.R., Brittle Fracture in Rounded-Tip V-Shaped Notches, Mater. Design, 2010, vol. 31, pp. 60–67.
Torabi, A.R., Fracture Assessment of U-Notched Graphite Plates under Tension, Int. J. Fract., 2013, vol. 181, pp. 285–292.
Torabi, A.R. and Berto, F., Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density, Strength Mater., 2013, vol. 45(6), pp. 635–647.
Torabi, A.R., Fakoor, M., and Pirhadi, E., Tensile Fracture in Coarse-Grained Polycrystalline Graphite Weakened by a U-Shaped Notch, Eng. Fract. Mech., 2013, vol. 111, pp. 77–85.
Torabi, A.R. and Amininejad, S.H., Brittle Fracture in V-Notches with End Holes, Int. J. Damage Mech., 2015, vol. 24(4), pp. 529–545.
Ayatollahi, M.R. and Torabi, A.R., Investigation of Mixed Mode Brittle Fracture in Rounded-Tip V-Notched Components, Eng. Fract. Mech., 2010, vol. 77, pp. 30873104.
Ayatollahi, M.R. and Torabi, A.R., Experimental Verification of RV-MTS Model for Fracture in Soda-Lime Glass Weakened by a V-Notch, J. Mech. Sci. Tech., 2011, vol. 25, pp. 2529–2534.
Torabi, A.R., Fakoor, M., and Pirhadi, E., Fracture Analysis of U-Notched Disc-Type Graphite Specimens under Mixed Mode Loading, Int. J. Solids Struct., 2014, vol. 51, pp. 1287–1298.
Torabi, A.R. and Pirhadi, E., Stress-Based Criteria for Brittle Fracture in Key-Hole Notches under Mixed Mode Loading, Euro J. Mech. A. Solids, 2015, vol. 49, pp. 1–12.
Torabi, A.R. and Abedinasab, S.M., Brittle Fracture in Key-Hole Notches under Mixed Mode Loading: Experimental Study and Theoretical Predictions, Eng. Fract. Mech, 2015, vol. 134, pp. 35–53.
Torabi, A.R., Fakoor, M., and Darbani, M.A., Pure Shear Fracture Study in a Brittle Graphite Material Containing a U-Notch, Int. J. Damage Mech., 2014, vol. 23(6), pp. 839–854.
Torabi, A.R. and Amininejad, S.H., Fracture Assessment of VO-Notches under Mode II Loading: Experiments and Theories, Theor. Appl. Fract. Mech., 2015, vol. 75, pp. 59–69.
Torabi, A.R. and Abedinasab, S.M., Mode II Notch Fracture Toughness Measurement for Key-Hole Notches by the Disk Test, J. Strain Anal. Eng. Design, 2015, vol. 50(4), pp. 264–275.
Lazzarin, P. and Zambardi, R., A Finite-Volume-Energy Based Approach to Predict the Static and Fatigue Behavior of Components with Sharp V-Shaped Notches, Int. J. Fract., 2001, vol. 112, pp. 275–298.
Berto, F. and Lazzarin, P., Recent Developments in Brittle and Quasi-Brittle Failure Assessment of Engineering Materials by Means of Local Approaches, Mater. Sci. Eng. R, 2014, vol. 75, pp. 1–48.
Torabi, A.R. and Berto, F., Notch Fracture Toughness Evaluation for a Brittle Graphite Material, Mater. Perform. Charact., 2014, vol. 3(3), pp. 1–16.
Berto, F., Campagnolo, A., and Gallo, P., Brittle Failure of Graphite Weakened by V -Notches: A Review of Some Recent Results under Different Loading Modes, Strength Mater., 2015, vol. 47(3), pp. 488–506.
Torabi, A.R., Campagnolo, A., and Berto, F., Tensile Fracture Analysis ofV-Notches with End Holes by Means of the Local Energy, Phys. Mesomech., 2015, vol. 18, no. 3, pp. 194–202.
Ayatollahi, M.R., Berto, F., and Lazzarin, P., Mixed Mode Brittle Fracture of Sharp and Blunt V-Notches in Polycrystalline Graphite, Carbon, 2011, vol. 49, pp. 24652474.
Berto, F. and Barati, E., Fracture Assessment of U-Notches under Three Point Bending by Means of Local Energy Density, Mater. Design, 2011, vol. 32, pp. 822–830.
Gomez, F.J., Elices, M., Berto, F., and Lazzarin, P., Local Strain Energy to Assess the Static Failure of U-Notches in Plates under Mixed Mode Loading, Int. J. Fract., 2007, vol. 145, pp. 29–45.
Gomez, F.J., Elices, M., Berto, F., and Lazzarin, P., Fracture of V-Notched Specimens under Mixed Mode (I + II) Loading in Brittle Materials, Int. J. Fract., 2009, vol. 159, pp. 121–135.
Gomez, F.J., Elices, M., Berto, F., and Lazzarin, P., Fracture of U-Notched Specimens under Mixed Mode: Experimental Results and Numerical Predictions, Eng. Fract. Mech, 2009, vol. 76, pp. 236–249.
Berto, F., Lazzarin, P., Gomez, F.J., and Elices, M., Fracture Assessment of U-Notches under Mixed Mode Loading: Two Procedures Based on the Equivalent Local Mode I Concept, Int. J. Fract., 2007, vol. 148, pp. 415433.
Campagnolo, A., Berto, F., and Leguillon, D., Fracture Assessment of Sharp V-Notched Ccomponents under Mode II Loading: A Comparison among Some Recent Criteria, Theor. Appl. Fract. Mech., 2016, doi 10.1016j. tafmec.2016.02.001.
Berto, F. and Ayatollahi, M.R., Fracture Assessment of Brazilian Disc Specimens Weakened by Blunt V-Notches under Mixed Mode Loading by Means of Local Energy, Mater. Design, 2011, vol. 32, pp. 2858–2869.
Torabi, A.R. and Berto, F., Mixed Mode Fracture Assessment of U-Notched Graphite Brazilian Disk Specimens by Means of the Local Energy, Struct. Eng. Mech., 2014, vol. 50(6), pp. 723–740.
Torabi, A.R., Campagnolo, A., and Berto, F., Experimental and Theoretical Investigation of Brittle Fracture in Key-Hole Notches under Mixed Mode I/II Loading, Acta Mech, 2015, vol. 226, no. 7, pp. 2313–2322.
Torabi, A.R. and Berto, F., Strain Energy Density to Assess Mode II Fracture in U-Notched Disk-Type Graphite Plates, Int. J. Damage Mech., 2014, vol. 23(7), pp. 917930.
Torabi, A.R., Campagnolo, A., and Berto, F., Static Strength of V-Notches with End Holes under Combined Tension-Shear Loading: Experimental Measurement by the Disk Test and Theoretical Prediction by the Local Energy, J. Test. Eval., 2017, vol. 45, no. 3, doi 10.1520/ JTE20140496.
Torabi, A.R., Campagnolo, A., and Berto, F., Local Strain Energy Density to Predict Mode II Brittle Fracture in Brazilian Disk Specimens Weakened by V-Notches with End Holes, Mater. Design, 2015, vol. 69, pp. 22–29.
Berto, F. and Lazzarin, P., A Review of the Volume-Based Strain Energy Density Approach Applied to V-Notches and Welded Structures, Theor. Appl. Fract. Mech., 2009, vol. 52(3), pp. 183–194.
Gomez, F.J., Elices, M., and Valiente, A., Cracking in PMMA Containing U-Shaped Notches, Fat. Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 795–803.
Gomez, F.J. and Elices, M., A Fracture Criterion for Sharp V-Notched Samples, Int. J. Fract., 2003, vol. 123, pp. 163–175.
Gomez, F.J., Guinea, G.V., and Elices, M., Failure Criteria for Linear Elastic Materials with U-Notches, Int. J. Fract., 2006, vol. 141, pp. 99–113.
Cendon, D.A., Torabi, A.R., and Elices, M., Fracture Assessment of Graphite V-Notched and U-Notched Specimens by Using the Cohesive Crack Model, Fat. Fract. Eng. Mater. Struct., 2015, vol. 38, pp. 563–573.
Sapora, A., Cornetti, P., Carpinteri, A., and Firrao, D., An Improved Finite Fracture Mechanics Approach to Blunt V-Notch Brittle Fracture Mechanics: Experimental Verification on Ceramic, Metallic and Plastic Materials, Theor. Appl. Fract. Mech., 2015, vol. 78, pp. 20–24.
Cornetti, P., Sapora, A., and Carpinteri, A., T-Stress Effects on Crack Kinking in Finite Fracture Mechanics, Eng. Fract. Mech., 2014, vol. 132, pp. 169–176.
WeiBgraeber, P. and Becker, W., Finite Fracture Mechanics Model for Mixed Mode Fracture in Adhesive Joints, Int. J. Solids Struct., 2013, vol. 50(14-15), pp. 2383–2394.
Sapora, A., Cornetti, P., and Carpinteri, A., A Finite Fracture Mechanics Approach to V-Notched Elements Subjected to Mixed-Mode Loading, Eng. Fract. Mech., 2013, vol. 97, pp. 216–226.
Cornetti, P., Mantic, V., and Carpinteri, A., Finite Fracture Mechanics at Elastic Interfaces, Int. J. Solids Struct., 2012, vol. 49(7-8), pp. 1022–1032.
Carpinteri, A., Cornetti, P., Pugno, N., et al., A Finite Fracture Mechanics Approach to Structures with Sharp V-Notches, Eng. Fract. Mech., 2008, vol. 75, pp. 17361752.
ASTM E8. Standard Test Method for Tension Testing of Metallic Materials, West Conshohocken, PA: ASTM Int., 2013.
ASTME132-04. Standard Test Methodfor Poisson’s Ratio at Room Temperature, West Conshohocken, PA: ASTM Int., 2010.
ASTM B646-12. Standard Practice for Fracture Toughness Testing of Aluminum Alloys, West Conshohocken, PA: ASTM Int., 2012.
Sih, G.C., Strain-Energy-Density Factor Applied to Mixed Mode Crack Problems, Int. J. Fract., 1974, vol. 10, pp. 305–321.
Campagnolo, A., Meneghetti, G., and Berto, F., Rapid Finite Element Evaluation of the Averaged Strain Energy Density of Mixed-Mode (I + II) Crack Tip Fields Including the T-Stress Contribution, Fat. Fract. Eng. Mater. Struct, 2016, doi 10.1111/ffe.12439.
Pook, L.P., Campagnolo, A., and Berto, F., Coupled Fracture Modes of Discs and Plates under Anti-Plane Loading and a Disc under In-Plane Shear Loading, Fat. Fract. Eng. Mater. Struct., 2016, doi 10.1111/ffe.12389.
Berto, F., A Review on Coupled Modes in V-Notched Plates of Finite Thickness: A Generalized Approach to the Problem, Phys. Mesomech., 2013, vol. 16, no. 4, pp. 378–390.
Campagnolo, A., Berto, F., and Marangon, C., Cyclic Plasticity in Three-Dimensional Notched Components under In-Phase Multiaxial Loading at R = -1, Theor. Appl. Fract. Mech., 2016, vol. 81, pp. 76–88.
Berto, F., Lazzarin, P., and Marangon, Ch., The Effect of the Boundary Conditions on In-Plane and Out-of-Plane Stress Field in Three Dimensional Plates Weakened by Free-Clamped V-Notches, Phys. Mesomech., 2012, vol. 15, no. 1-2, pp. 26–36.
Pook, L.P., A 50-Year Retrospective Review of ThreeDimensional Effects at Cracks and Sharp Notches, Fat. Fract. Eng. Mater. Struct., 2013, vol. 36, pp. 699–723.
Yosibash, Z., Bussiba, A., and Gilad, I., Failure Criteria for Brittle Elastic Materials, Int. J. Fract., 2004, vol. 125, pp. 307–333.
Lazzarin, P., Berto, F., Gomez, F.J., and Zappalorto, M., Some Advantages Derived from the Use of the Strain Energy Density over a Control Volume in Fatigue Strength Assessments of Welded Joints, Int. J. Fatigue, 2008, vol. 30, pp. 1345–1357.
Lazzarin, P., Berto, F., and Zappalorto, M., Rapid Calculations of Notch Stress Intensity Factors Based on Averaged Strain Energy Density from Coarse Meshes: Theoretical Bases and Applications, Int. J. Fatigue, 2010, vol. 32, pp. 1559–1567.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Text © A.R. Torabi, F. Berto, A. Campagnolo, 2016, published in Fizicheskaya Mezomekhanika, 2016, Vol. 19, No. 2, pp. 15-23.
Rights and permissions
About this article
Cite this article
Torabi, A.R., Berto, F. & Campagnolo, A. Elastic-plastic fracture analysis of notched Al 7075-T6 plates by means of the local energy combined with the equivalent material concept. Phys Mesomech 19, 204–214 (2016). https://doi.org/10.1134/S1029959916020144
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1029959916020144