Abstract
This paper provides a simple, albeit accurate, criterion for prediction of the rupture loads of brittle, or quasi-brittle, U-notched samples, where linear elastic fracture mechanics is not applicable because blunted notches do not exhibit stress singularities. Good agreement is found between numerical predictions and experimental results. The results of fracture tests from 18 different ceramic materials and a polymer (at − 60°C) are summarized and are used as a reference for checking the fracture criterion. Seven fracture criteria are reviewed and it is shown that all can be recast into the proposed criterion.
Similar content being viewed by others
References
K Ando M Iwasa A Kim AC Chu S Sato (1993) ArticleTitleEffects of crack length, notch root radius and grain size on fracture toughness of fine ceramics Fatigue Frac Eng Mater Struct 16 995–1006
ZP Bazant J Planas (1998) Fracture and size effect in concrete and other quasibrittle materials CRC Press Boca Raton
RL Bertolotti (1973) ArticleTitleFracture toughness of polycrystalline Al2O3 J Am Ceram Soc 56 107 Occurrence Handle10.1111/j.1151-2916.1973.tb12373.x
I Chasiotis WG Knauss (2003) ArticleTitleThe mechanical strength of polysilicon films: Part 2. Size effects associated with elliptical and circular perforations J Mech Phys Solids 51 1551–1572 Occurrence Handle10.1016/S0022-5096(03)00050-4
M Creager PC Paris (1967) ArticleTitleElastic field equations for blunt cracks with reference to stress corrosion cracking Int J Frac Mech 3 247–252
M Elices GV Guinea FJ Gómez J Planas (2002) ArticleTitleThe cohesive zone model: advantages, limitations and challenges Eng Frac Mech 69 137–163 Occurrence Handle10.1016/S0013-7944(01)00083-2
S Filippi P Lazzarin R Tovo (2002) ArticleTitleDevelopments of some explicit formulas useful to describe elastic stress fields ahead of notches in plates Int J Solids Struct 39 4543–4565 Occurrence Handle1049.74575 Occurrence Handle10.1016/S0020-7683(02)00342-6
G Glinka (1985) ArticleTitleEnergy density approach to calculation of inelastic strain-stress near notches and cracks Eng Frac Mech 22 485–508 Occurrence Handle10.1016/0013-7944(85)90148-1
GA Gogotsi (2003) ArticleTitleFracture toughness of ceramics and ceramic composites Ceram Int 7 777–784 Occurrence Handle10.1016/S0272-8842(02)00230-4
FJ Gómez M Elices (2004) ArticleTitleA fracture criterion for blunted V-notched samples Int J Frac 127 239–264 Occurrence Handle10.1023/B:FRAC.0000036832.29429.21
FJ Gómez M Elices J Planas (2005) ArticleTitleThe cohesive crack concept: applications to PMMA at—60°C Eng Frac Mech 72 1268–1285 Occurrence Handle10.1016/j.engfracmech.2004.09.005
FJ Gómez M Elices (2006) ArticleTitleFracture loads for ceramic samples with rounded notches Eng Frac Mech 73 880–894 Occurrence Handle10.1016/j.engfracmech.2005.11.005
GV Guinea M Elices C Rosselló (2002) ArticleTitleAssessment of defect size in brittle fibers Eng Frac Mech 69 1057–1066 Occurrence Handle10.1016/S0013-7944(01)00122-9
Irwin GR (1958) Fracture. Handbuch der Physik 6. Springer Verlag, Berlin, pp 551–590
P Lazzarin R Zambardi (2001) ArticleTitleA finite volume energy based approach to predict the static and fatigue behaviour of components with sharp V-shaped notches Int J Frac 112 275–298 Occurrence Handle10.1023/A:1013595930617
Lazzarin P (2005) Further developments and applications of the notch stress intensity approach. Internal Report 1/2005, Dipartimento di Tecnica e Gestione dei sistemi industriali, Universita di Padova
P Lazzarin F Berto (2005) ArticleTitleSome expressions for the strain energy in a finite volume surrounding the root of blunted V-notches Int J Frac 135 161–185 Occurrence Handle10.1007/s10704-005-3943-6
P Lazzarin S Filippi (2006) ArticleTitleA generalized stress intensity factor to be applied to rounded V-shaped notches Int J Solids Struct 43 2461–2478 Occurrence Handle10.1016/j.ijsolstr.2005.03.007
D Leguillon (2002) ArticleTitleStrength or toughness? A criterion for crack onset at a notch Eur J Mech Phys A/Solids 21 61–72 Occurrence Handle1061.74047 Occurrence Handle10.1016/S0997-7538(01)01184-6
D Leguillon Z Yosibash (2003) ArticleTitleCrack onset at a V-notch. Influence of the notch tip radius Int J Frac 122 1–21 Occurrence Handle10.1023/B:FRAC.0000005372.68959.1d
P Lukas (1987) ArticleTitleStress intensity factor for small notch-emanated cracks Eng Frac Mech 26 471–473 Occurrence Handle10.1016/0013-7944(87)90027-0
D Munz RT Bubsey JL Shannon (1980) ArticleTitleFracture toughness determination of Al 2 O 3 using four point bend specimens with straight-through and chevron notches J Am Ceram Soc 63 300–305 Occurrence Handle10.1111/j.1151-2916.1980.tb10725.x
RJ Myers BM Hillberry (1977) ArticleTitleEffect of notch radius in the fracture behaviour of monocrystalline silicon ICF4 Proc Waterloo Can 3 1001–1005
H Neuber (1958) Theory of notch stresses Springer-Verlag Berlin Occurrence Handle0962.74002
V Novoshilov (1969) ArticleTitleOn a necessary and sufficient criterion for brittle strength J Appl Math Mech (Translation of PMM) 33 IssueID2 212–222
Pastor JY (1993) Fractura de materiales cerámicos avanzados. Thesis doctoral, UCM
RO Ritchie JF Knott JR Rice (1973) ArticleTitleOn the relation between critical tensile stress and fracture toughness in mild steel J Mech Phys Solids 21 395–410 Occurrence Handle10.1016/0022-5096(73)90008-2
A Seweryn (1994) ArticleTitleBrittle fracture criterion for structures with sharp notches Eng Frac Mech 47 673–681 Occurrence Handle10.1016/0013-7944(94)90158-9
GC Sih (1974) ArticleTitleStrain-energy-density factor applied to mixed mode loading Int J Frac 10 305–321 Occurrence Handle10.1007/BF00035493
D Taylor P Cornetti N Pugno (2005) ArticleTitleThe fracture mechanics of finite crack extension Eng Frac Mech 72 1021–1038 Occurrence Handle10.1016/j.engfracmech.2004.07.001
K Tsuji K Iwase K Ando (1999) ArticleTitleAn investigation into the location of crack initiation sites in alumina, polycarbonate and mild steel Fatigue Frac Eng Mater Struct 22 509–517 Occurrence Handle10.1046/j.1460-2695.1999.00181.x
J Wang WM Rainforth I Wadsworth R Stevens (1992) ArticleTitleThe effects of notch width on the SENB toughness for oxide ceramics J Eur Ceram Soc 10 21–31 Occurrence Handle10.1016/0955-2219(92)90115-T
Z Yosibash A Bussiba I Gilad (2004) ArticleTitleFracture criteria for brittle elastic materials Int J Frac 125 307–333 Occurrence Handle10.1023/B:FRAC.0000022244.31825.3b
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gómez, F.J., Guinea, G.V. & Elices, M. Failure criteria for linear elastic materials with U-notches. Int J Fract 141, 99–113 (2006). https://doi.org/10.1007/s10704-006-0066-7
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10704-006-0066-7