Abstract
An analytical modeling to predict the bending behavior of functionally graded core sandwich beams designed with plaster and cork inclusion core and polymer skins is carried out within the framework of the present study. In addition, a microscopic analysis of the beams core using scanning electron microscope (SEM) was conducted in order to better understand the microstructural material degradation and the interaction of the cork aggregates within the plaster matrix. Accordingly, the main objective of this work is to complement the experimental observations through a theoretical prediction using high-order beam theories. In this respect, the originality of this study is to confront the modeling based on different material laws of functionally graded material (FGM)-based sandwich beams advocated in the literature to the experimental observations. Therefore, the emphasized results in terms of deflection, stiffness and stresses are compared with a good agreement to the experimental data and the advocated laws of the normalized standards. As main findings, the outcomes analysis provides a practical validated equations enabling reliable prediction of the elastic flexural response of plaster/cork FGM core sandwich beams.
Similar content being viewed by others
References
Ait Taleb S, Si Salem A, Ait Taher K (2015) Bending and shear behavior of a composite beam strengthened and double-confined with FRP-jacket. Proced Eng 114:165–172
Ait Taleb S, Si Salem A, Ait Tahar K (2016) Behaviour of a new graded beam reinforced with externally bonded composite sheets: theoretical and experimental studies. Eur J Environ Civ Eng 21:1171–1185
Akgoz B, Civalek O (2013) Buckling analysis of functionally graded microbeams based on the strain gradient theory. Acta Mech 224:2185–2201
Ananta Bhaskararao K, Ranga Janardhana G (2021) Microstructure, hardness and flexural strength of Ni/Al2O3 FGMs by pressure-less sintering with different cooling rates. Bol De La Soc Esp De Cerám y Vidr 60:255–265
Arslan K, Gunes R (2018) Experimental damage evaluation of honeycomb sandwich structures with Al/B4C FGM face plates under high velocity impact loads. Compos Struct 202:304–312
Aydin M, Kemal Apalak M (2016) Experimental damage analysis of Al/SiC functionally graded sandwich plates under ballistic impact. Mater Sci Eng A 671:107–117
Bagheri H, Kiani Y, Eslami MR (2023) Geometrically nonlinear response of FGM beams on elastic foundation subjected to thermal shock. Iran J Sci Technol: Trans Mech Eng 47(1):187–201
Basu D, Pramanik S, Das S et al (2023) Analyse des vibrations sans éléments finis des plaques pliées fonctionnellement graduées. Iran J Sci Technol Trans Mech Eng 47:697–716
Belarbi MO, Houari MSA, Hirane H et al (2022) On the finite element analysis of functionally graded sandwich curved beams via a new refined higher order shear deformation theory. Compos Struct 179:114715
Belkhodja Y, Belkhodja MEA, Fekirini H et al (2023) New quasi-three-, and two-dimensional trigonometric-cubic monomial HSDT for thermal buckling and thermo-mechanical bending analyses of FGM symmetrical/non-symmetrical sandwich plates with hard/soft core. Compos Struct 304:116402
Boch Chartier T, Huttepain M (1986) Tape casting of Al2O3/ZrO2 laminated composites. J Am Ceram Soc 69:191–192
Bouzit S, Merli F, Sonebi M, Buratti C et al (2021) Gypsum-plasters mixed with polystyrene balls for building insulation: experimental characterization and energy performance. Constr Build Mater 283:122625
Chen CD, Huang BF (2023) A novel higher-order refined zigzag theory for static bending analysis in sandwich composite beam. Appl Math Model 119:586–604
Dash BAP, Singh BN (2020) Buckling analysis of porous FGM sandwich plates under various types non-uniform edge compression based on higher order shear deformation theory. Compos Struct 251:112597
Deng J, Wang X, Zhou G (2021) A novel computational framework for exact stress analysis and bending behavior of sandwich panels with non-homogeneous cores. Thin-Walled Struct 169:108449
Farahmand S, Monazzah AH, Soorgee MH (2019) The fabrication of Al2O3–Al FGM by SPS under different sintering temperatures: microstructural evaluation and bending behavior. Ceram Int 45:22775–22782
Farahmand S, Soorgee MH, Monazzah AH (2021) Evaluating the elastic properties of Al2O3–Al FGMs by longitudinal and transverse ultrasonic bulk waves velocity features. Ceram Int 47:24906–24915
Garg A, Chalak HD (2019) A review on analysis of laminated composite and sandwich structures under hygrothermal conditions. Thin-Walled Struct 142:205–226
Garg A, Chalak HD, Chakrabarti A (2020) Comparative study on the bending of sandwich FGM beams made up of different material variation laws using refined layerwise theory. Mech Mater 151:103634
Garg A, Belarbi MO, Chalak HD et al (2021) A review of the analysis of sandwich FGM structures. Compos Struct 258:113427
Hassan A, Kurgan N (2020) Bending analysis of thin FGM skew plate resting on Winkler elastic foundation using multi-term extended Kantorovich method. Eng Sci Technol Int J 23:788–800
Hazwani F, Todo M (2022) Deformation mechanism of porous composite sandwich beam for orthopaedical application under three-point bending. Compos Struct 281:114983
Hernandez-Olivaresa F, Bollatib MR, Delrioc M, Pargalandad B (1999) Development of cork/gypsum composites for building applications. Construct Build Mater 13:179–186
Hohe J, Hardenacke V, Fascio V et al (2012) Numerical and experimental design of graded cellular sandwich cores for multi-functional aerospace applications. Mater Des 39:20–32
Jing L, Yang F, Zhao LM (2017) Perforation resistance of sandwich panels with layered gradient metallic foam cores. Compos Struct 171:217–226
Joshi KK, Kar VR (2023) Elastoplastic behaviour of multidirectional porous functionally graded panels: a nonlinear FEM approach. Iran J Sci Technol: Trans Mech Eng. https://doi.org/10.1007/s40997-023-00653-
Karakoti A, Pandey S, Kar VR (2022) Nonlinear transient analysis of porous P-FGM and S-FGM sandwich plates and shell panels under blast loading and thermal environment. Thin-Walled Struct 173:108985
Karama M, Afaq KS, Mistou S (2003) Mechanical behaviour of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity. Int J Solids Struct 40:1525–1546
Kazemi M (2021) Experimental analysis of sandwich composite beams under three-point bending with an emphasis on the layering effects of foam core. Structures 29:383–391
Lakreb N et al (2023) Physical properties and thermal conductivity of cork-based sandwich panels for building insulation. Constr Build Mater 368:130420
Li Z, Wang Z, Wang X et al (2020) Bending behavior of sandwich beam with tailored hierarchical honeycomb cores. Thin-Walled Struct 157:107001
Liu BL, Li S, Li YS (2022) Bending of FGM sandwich plates with tunable auxetic core using DQM. Eur J Mech: A/Solids 97(2023):104838
Medjmadj S, Si Salem A, Ait Taleb S (2022) Experimental behavior of plaster/cork functionally graded sandwich panels with polymer skins. Constr Build Mater 344:128257
Mouthanna A, Bakhy SH, Al-Waily M (2023) Analytical investigation of nonlinear free vibration of porous eccentrically stiffened functionally graded sandwich cylindrical shell panels. Iran J Sci Technol: Trans Mech Eng 47(3):1035–1053
Murat Aydin M, Apalak K (2016) Experimental damage analysis of Al/SiC functionally graded sandwich plates under ballistic impact. Mater Sci Eng A 671:107–117
NF T 54 -606 (1987) Plastics base d sandwich structures. Bending test. Afnor 87461
Nguyen VD, Phung VB (2022) Static bending, free vibration, and buckling analyses of two-layer FGM plates with shear connectors resting on elastic foundations. Alex Eng J 62:369–390
Nguyen VC, Tran TT, Nguyen-Thoi T et al (2022) A novel finite element formulation for static bending analysis of functionally graded porous sandwich plates. Front Struct Civ Eng 16(12):1599–1620
Novais Rui M, Senff L, Carvalheiras J et al (2021) Simple and effective route to tailor the thermal, acoustic and hygrothermal properties of cork-containing waste derived inorganic polymer composites. J Build Eng 42:102501
Novak N, Borovinšek M, Al-Ketan O et al (2022) Impact and blast resistance of uniform and graded sandwich panels with TPMS cellular structures. Compos Struct 300:116174
Ouakarrouch M, Bousshine S, Baibi A et al (2022) Acoustic and thermal performances assessment of sustainable insulation panels made from cardboard waste and natural fibers. Appl Acoust 199:109007
Pham QH, Malekzadeh P, Tran VK et al (2023) Free vibration analysis of functionally graded porous curved nanobeams on elastic foundation in hygro–thermo–magnetic environment. Front Struct Civ Eng 17:584–605
Pyrzowski L, Sobczyk B (2020) Local and global response of sandwich beams made of GFRP facings and PET foam core in three point bending test. Compos Struct 241:112122
Qi YN, Dai HL, Deng ST (2020) Thermoelastic analysis of stiffened sandwich doubly curved plate with FGM core under low velocity impact. Compos Struct 253:112826
Reddy JN (1990) A general non-linear third order theory of plates with moderate thickness. Int J Non-Linear Mech 25:677–686
Sayyad AS, Ghugal YM (2019) Modeling and analysis of functionally graded sandwich beams: a review. Mech Adv Mater Struct 26:1776–1795
Shinde BM, Sayyad AS (2022) A new higher order shear and normal deformation theory for FGM sandwich shells. Compos Struct 280:114865
Shirvani SMN, Gholami M, Afrasiab H et al (2023) Optimal design of a composite sandwich panel with a hexagonal honeycomb core for aerospace applications. Iran J Sci Technol Trans Mech Eng 47:557–568
Si Salem A, Taouche-Kheloui F, Ait Tahar K (2020) Experimental investigation on the bending and buckling behavior of bio-based core innovative sandwich panels. Int J Struct Integr 12(2):226–240
Şimşek M (2016) Buckling of timoshenko beams composed of two-dimensional functionally graded material (2D-FGM) having different boundary conditions. Compos Struct 149:304–314
Swaminathan K, Sangeetha DM (2017) Thermal analysis of FGM plates: a critical review of various modeling techniques and solution methods. Compos Struct 160:43–60
Swaminathan K, Naveenkumar DT, Zenkour AM et al (2015) Stress, vibration and buckling analyses of FGM plates-A state-of-the-art review. Compos Struct 120:10–31
Taczała M, Buczkowski R, Kleiber M (2022) Analysis of FGM plates based on physical neutral surface using general third-order plate theory. Compos Struct 301:116218
Thai H-T, Kim S-E (2015) A review of theories for the modeling and analysis of functionally graded plates and shells. Compos Struct 128:70–86
Theotokoglou EE, Mallios DA (2022) Computational analysis of a sandwich beam with FGM face sheets under flexural loading. Proced Struct Integr 41:361–371
Tomar SS, Talha M (2019) Influence of material uncertainties on vibration and bending behaviour of skewed sandwich FGM plates. Compos B 163:779–793
Tounsi A, Sallai BO, Mechab I et al (2009) A theoretical analysis of flexional bending of Al/Al2O3 S-FGM thick beams. Comput Mater Sci 44:1344–1350
Touratier M (1991) An efficient standard plate theory. Int J Eng Sci 29:901–916
Van Vinh P (2021) Static bending analysis of functionally graded sandwich beams using a novel mixed beam element based on first-order shear deformation theory. Forces in Mech 4:100039
Vuong PM, Dinh Duc N (2020) Nonlinear buckling and post-buckling behavior of shear deformable sandwich toroidal shell segments with functionally graded core subjected to axial compression and thermal loads. Aerosp Sci Technol 106:106084
Wu Y, Zhu X, Liu C et al (2022) Assessment of interfacial fracture of asphalt mortar-aggregate system at low temperature: a study based on four-point bending test of sandwich beams. Constr Build Mater 352:129057
Yuan H, Zhang J, Sun H (2022) The failure behavior of double-layer metal foam sandwich beams under three-point bending. Thin-Walled Struct 180:109801
Zhang J, Qin Q, Ai W, Li H, Wang TJ (2014) The failure behavior of geometrically asymmetric metal foam core sandwich beams under three-point bending. J Appl Mech Trans ASME 81(7):1–12
Zhang J, Qin Q, Wang Z et al (2015) A theoretical study of plastic analysis of fully clamped geometrical asymmetric sandwich beams with a metal foam core. Int J Mech Sci 99:98–111
Zhang J, Qin Q, Han X, Ai W (2016) The initial plastic failure of fully clamped geometrical asymmetric metal foam core sandwich beams. Compos Part B Eng 87:233–244
Zhang J, Huang W, Miao F, Du J, Sun H (2022a) Plastic behavior of sandwich beams with fiber metal laminate face-sheets and metal foam core: combined local denting and overall deformation. Thin-Walled Struct 173:108973
Zhang J, Zhu Y, Yuan H et al (2022b) Failure behavior of sandwich beams with glass fiber-reinforced epoxy/aluminum laminates face-sheets and aluminum honeycomb core under three-point bending. Thin-Walled Struct 177:109476
Zhang J, Huang W, Yuan H, Wu X (2023) Failure behavior of a sandwich beam with GLARE face-sheets and aluminum foam core under three-point bending. Thin-Walled Struct 183:110438
Zhao M, Wu X, Du J et al (2022) Plastic behavior of the foam-filled sandwich beam with circular tube core under transverse loading. Eng Struct 268:114801
Zhao W, Guo D, Gong X et al (2023) Nonlinear axisymmetric buckling analysis of the FGM sandwich shallow spherical shells under thermomechanical loads. Eur J Mech/A Solids 97:104841
Funding
This study has received no external funding.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
Authors claim that there is no conflict of interest in this manuscript.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Medjmadj, S., Ait Taleb, S. & Si Salem, A. Analytical Modeling of the Bending Behavior of Plaster/Cork Functionally Graded Core Sandwich Beams: Analysis and Experimental Validation. Iran J Sci Technol Trans Mech Eng (2023). https://doi.org/10.1007/s40997-023-00732-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40997-023-00732-z