Skip to main content
SpringerLink
Log in

Innovative Hybrid High-Pressure Die-Casting Process for Load-Bearing Body-In-White Structural Components

  • Technical Paper
  • Published:
International Journal of Metalcasting Aims and scope Submit manuscript

Abstract

This paper introduces an innovative manufacturing process for hybrid components in the automotive body-in-white (BIW) structure, made of high-strength steel BR1500HS and the aluminum cast alloy AlSi10MnMg. The casting method is high-pressure die casting (HPDC), known for producing components with intricate shapes in light alloys. The combination of Design of Experiments (DoE) and simulation is employed to assess and optimize input process parameters effectively. The simulation, conducted using a commercial simulation software, ProCAST and Abaqus, visualizes the casting operation and the heat transfer between the two dissimilar materials. The primary focus is on investigating the shrinkage porosity defect under various HPDC process conditions. The simulation and experimental results indicate that the melting temperature of the aluminum alloy has the most significant impact on shrinkage porosity, followed by injection velocity and injection pressure, whereas mold/tube initial temperature has a lesser effect. Optimal process parameters are identified as a melting temperature of 700 °C, a first-stage velocity of 0.4 mm/s for 0.4 s, a second-stage velocity of 2.5 mm/s for 0.3 s, and a mold/tube initial temperature of 150 °C. Furthermore, the study explores another challenging defect, which is the steel tube deformation under high casting pressure. An effective solution is proposed and tested by using internal air pressure support for the tube. Results demonstrate a notable improvement in final product quality, wall thickness uniformity, and a reduction in steel tube deformation magnitude to 1.9 mm compared to 6.26 mm in the case of hybrid-HPDC without air pressure support.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17

Similar content being viewed by others

References

  1. X Sun F Meng J Liu J McKechnie J Yang 2019 Life cycle energy use and greenhouse gas emission of lightweight vehicle–a body-in-white design J. Clean. Prod. https://doi.org/10.1016/j.jclepro.2019.01.225

    Article  Google Scholar 

  2. E Lordan Y Zhang K Dou A Jacot C Tzileroglou S Wang Y Wang 2022 High-pressure die casting: a review of progress from the EPSRC future lime hub Metals https://doi.org/10.3390/met12101575

    Article  Google Scholar 

  3. GG Wang J Weiler J Magnes 2023 Recent developments in high-pressure die-cast magnesium alloys for automotive and future applications Alloy https://doi.org/10.1016/j.jma.2022.10.001

    Article  Google Scholar 

  4. N Ahmed MA Ali MH Raza S Zahoor A Ur Rehman M Rafaqat 2023 Squeeze overcasting of bimetallic composite Al2026/Al–4.5%Cu with acidic quenching in aging treatment characterization of mechanical properties and joint interface microstructure Int. J. Metalcast. https://doi.org/10.1007/s40962-023-01141-3

    Article  Google Scholar 

  5. B. Bader, E. Türck, T. Vietor, Multi material design. A current overview of the used potential in automotive industries. Technologies for economical and functional lightweight design: Conf. Proc. (2019) https://doi.org/10.1007/978-3-662-58206-0_1

  6. T. Fröhlich, S. Kleemann, T. Vietor, L. M. Abdelwahed, A. K. Spresny, F. Preller, Development of automotive body parts in multi-material design—processes and tools, in Life Cycle Design & Engineering of Lightweight Multi-Material Automotive Body Parts (2022) (Springer, Berlin, Heidelberg), p. 15-37 https://doi.org/10.1007/978-3-662-65273-2_2

  7. J Altach B Bader T Fröhlich D Klaiber T Vietor 2019 Approach to the systematic categorization and qualitative evaluation of multi-material designs for use in vehicle body structures Proc. CIRP https://doi.org/10.1016/j.procir.2019.04.339

    Article  Google Scholar 

  8. R Beygi RJC Carbas AQ Barbosa EAS Marques LFM Silva da 2021 A comprehensive analysis of a pseudo-brittle fracture at the interface of intermetallic of η and steel in aluminum/steel joints made by FSW: microstructure and fracture behavior Mater. Sci. Eng. A https://doi.org/10.1016/j.msea.2021.141812

    Article  Google Scholar 

  9. S Martin D Sulik XF Fang H Becker A Leineweber 2022 Steel-aluminum hybrid die casting: microstructures related to the applied Al–Si bond coating Intermetallics https://doi.org/10.1016/j.intermet.2022.107712

    Article  Google Scholar 

  10. M Pintore J Wölck T Mittler T Greß B Tonn W Volk 2020 Composite casting and characterization of Cu–Al bilayer compounds Int. J. Metalcast. 14 155 166 https://doi.org/10.1007/s40962-019-00344-x

    Article  CAS  Google Scholar 

  11. KM Min JS Shin JM Kim 2023 Effect of Mn Addition to Al–Si alloy on the layer formed at the interface with cast iron in compound casting Int. J. Metalcast. https://doi.org/10.1007/s40962-023-01024-7

    Article  Google Scholar 

  12. X Fang J Gundlach JJ Schipperges X Jiang 2018 On the steel-aluminum hybrid casting by sand casting J. Mater. Eng. Perform. https://doi.org/10.1007/s11665-018-3717-8

    Article  Google Scholar 

  13. AO Bakke JO Løland S Jørgensen J Kvinge L Arnberg Y Li 2021 Interfacial microstructure formation in Al7SiMg/Cu compound castings Int. J. Metalcast. 15 40 48 https://doi.org/10.1007/s40962-020-00463-w

    Article  CAS  Google Scholar 

  14. K Hyo-Jung KT Hyeong SJ Sik PS Yeon H Soongkeunm LK Mook 2019 Effect of surface treatments on cast-bonding characteristics of steel-aluminum hybrid composite materials Arch. Metall. Mater. https://doi.org/10.24425/amm.2019.129467

    Article  Google Scholar 

  15. S Senge J Brachmann G Hirt A Bührig-Polaczek 2018 Evaluation of interlocking bond strength between structured 1.0338 steel sheets and high pressure die cast AlMg5Si2 AIP Conf. Proc. https://doi.org/10.1063/1.5034873

    Article  Google Scholar 

  16. J Jakumeit H Behnken R Laqua J Eiken J Brachmann 2020 Multi-scale simulation of hybrid light metal structures produced by high pressure die casting Mater. Sci. Eng. https://doi.org/10.1088/1757-899X/861/1/012035

    Article  Google Scholar 

  17. N Nolte T Lukasczyk B Mayer 2022 Investigation of the microstructure and properties of aluminum-copper compounds fabricated by the high-pressure die casting process Metals https://doi.org/10.3390/met12081314

    Article  Google Scholar 

  18. L Bruckmeier A Ringel U Vroomen D Bailly A Bührig-Polaczek 2023 Influence of high-pressure die casting process parameters on the compound strength of hybrid components with undercut sheet metal Metals https://doi.org/10.3390/met13101717

    Article  Google Scholar 

  19. C Locke M Guggemos M Gruber L Maier L Mayr T Weiß W Volk D Günther 2023 Compound casting of aluminum with sheet steel in 3d sand casting using an inductive heating system Metals https://doi.org/10.3390/met13020354

    Article  Google Scholar 

  20. M Senff W Volk 2023 Hybrid joining of cast aluminum and steel by compound casting and friction stir welding Prod. Eng. https://doi.org/10.1007/s11740-023-01184-9

    Article  Google Scholar 

  21. P Du J Li Y Zhao Y Dai Z Yang Y Tian 2018 Corrosion characteristics of Al alloy/galvanized-steel couple in NaCl solution Int. J. Electrochem. https://doi.org/10.20964/2018.11.99

    Article  Google Scholar 

  22. H Zhu M Leng G Jin H Miao 2023 A review of research on galvanic corrosion of aluminum alloys Fluid Dyn. Mater. Process. https://doi.org/10.32604/fdmp.2023.025416

    Article  Google Scholar 

  23. M Rübner M Günzl C Körner RF Singer 2011 Aluminium–aluminium compound fabrication by high pressure die casting Mater. Sci. Eng. A https://doi.org/10.1016/j.msea.2011.05.076

    Article  Google Scholar 

  24. T Liu Q Wang Y Sui Q Wang W Dinga 2016 An investigation into interface formation and mechanical properties of aluminum–copper bimetal by squeeze casting Mater. Des. https://doi.org/10.1016/j.matdes.2015.10.072

    Article  Google Scholar 

  25. J Shina T Kima K Lima H Choa D Yangb C Jeongc S Yid 2019 Effects of steel type and sandblasting pretreatment on the solid-liquid compound casting characteristics of zinc-coated steel/aluminum bimetals J. Alloys Compd. https://doi.org/10.1016/j.jallcom.2018.11.134

    Article  Google Scholar 

  26. AO Bakke L Arnberg JO Løland S Jørgensen J Kvinge Y Li 2020 Formation and evolution of the interfacial structure in al/steel compound castings during solidification and heat treatment J. Alloys Compd. https://doi.org/10.1016/j.jallcom.2020.156685

    Article  Google Scholar 

  27. M Wu J Yang F Huang L Hua S Xionget 2022 Bonding of cast iron-aluminum in bimetallic castings by high pressure die casting process Int. J. Adv. Manuf. Technol. https://doi.org/10.21203/rs.3.rs-1002236/v1

    Article  PubMed  PubMed Central  Google Scholar 

  28. A Manzari Tavakoli B Nami I Khoubrou 2022 Influences of coating type on microstructure and strength of aluminum–steel bimetal composite interface Int. J. Metalcast. https://doi.org/10.1007/s40962-021-00630-7

    Article  Google Scholar 

  29. Y Zhang E Lordan K Dou S Wang Z Fan 2020 Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys J. Manuf. Process. https://doi.org/10.1016/j.jmapro.2020.04.071

    Article  Google Scholar 

  30. D Cica D Kramar 2018 Intelligent process modeling and optimization of porosity formation in high-pressure die casting Int. J. Metalcast. 12 814 824 https://doi.org/10.1007/s40962-018-0213-8

    Article  CAS  Google Scholar 

  31. Z Ignaszak J Hajkowski 2015 Contribution to the identification of porosity type in AlSiCu high-pressure-die-castings by experimental and virtual way Arch. Foundry Eng. https://doi.org/10.1515/afe-2015-0026

    Article  Google Scholar 

  32. P Szalva IN Orbulov 2020 Influence of vacuum support on the fatigue life of AlSi9Cu3(Fe) aluminum alloy die castings J. Mater. Eng. Perform. https://doi.org/10.1007/s11665-020-05050-y

    Article  Google Scholar 

  33. H Caoa C Wangb Q Shana J Chea Z Luoa L Wanga M Huanga 2019 Kinetic analysis of pore formation in die-cast metals and influence of absolute pressure on porosity Vacuum https://doi.org/10.1016/j.vacuum.2019.108828

    Article  Google Scholar 

  34. A Sadeghian N Iqbal 2022 A review on dissimilar laser welding of steel-copper, steel-aluminum, aluminum-copper, and steel-nickel for electric vehicle battery manufacturing Opt. Laser Technol. https://doi.org/10.1016/j.optlastec.2021.107595

    Article  Google Scholar 

  35. R. Harrison, S. Olson, A. Te, Dissimilar metal casting, in Worcester polytechnic institute. https://digital.wpi.edu/show/2b88qd95b (2016)

Download references

Funding

The research leading to these results received funding from Intelligent Aerospace Manufacturing (Beijing) Technology Co., Ltd. under Grant Agreement No [SK201901A30-01].

Author information

Authors and Affiliations

  1. Intelligent Aerospace Manufacturing (Beijing) Technology Co., Ltd., Beijing, 100080, China

    Hamza Blala, Cheng Pengzhi, Zhang Shenglun, Cheng Gang, Ruan Shangwen & Meng Zhang

  2. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing, 100191, China

    Hamza Blala

  3. Beijing Information Science and Technology University, Beijing, 100192, China

    Zhang Shenglun

  4. University of Science and Technology Beijing, Beijing, 100083, China

    Ruan Shangwen

  5. School of Energy and Power Engineering, Beihang University, Beijing, 100191, China

    Meng Zhang

Authors
  1. Hamza Blala
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Cheng Pengzhi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhang Shenglun
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Cheng Gang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Ruan Shangwen
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Meng Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

HB contributed to conceptualization, investigation, methodology, and writing—original draft. CP contributed to supervision, project administration, and funding acquisition. ZS performed visualization, data curation, and writing—review and editing. CG performed supervision and writing—reviewing and editing. RS carried out formal analysis and investigation. MZ contributed to software and resources.

Corresponding author

Correspondence to Hamza Blala.

Ethics declarations

Conflict of interest

The authors have no relevant financial or non-financial interests to disclose.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Blala, H., Pengzhi, C., Shenglun, Z. et al. Innovative Hybrid High-Pressure Die-Casting Process for Load-Bearing Body-In-White Structural Components. Inter Metalcast (2024). https://doi.org/10.1007/s40962-024-01280-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s40962-024-01280-1

Keywords

Search

Navigation