Abstract
This is an attempt to develop thermally stable shellac–epoxy coating blends with flame-retardant properties. The monophosphazene and silicon precursors were synthesized with PCl5 and dichlorodimethylsilane (DCMS) as phosphorus and silicon sources, respectively. The synthesized phosphazene and silicon precursor moieties were then reacted with shellac in various concentrations to prepare the modified shellac. The shellac/modified shellac and epoxy coatings were then mixed to form the blend formulations and coated onto the mild steel panels. The structure confirmation of both the precursors was achieved using physicochemical analysis, FTIR and NMR, while the modified shellac was characterized using FTIR. Furthermore, the thermal, mechanical and flame-retardant properties of the coating blends were analyzed. The Tg values and the degradation curves showed that the coating blends with Si and P modification were more thermally stable than the unmodified shellac blends. The maximum LOI obtained was 27 for the highest concentrations of P and Si in the coating, similarly, the calculations based on the char yields of LOI also showed the similar trend of increasing values although the values were lower than the practical LOI values. The barrier properties were predicted depending on the results of water absorption and gel content values which showed that the crosslinking density was increasedwith increasing concentrations of shellac in the coating.
Similar content being viewed by others
References
Farag Y (2010) Characterization of different shellac types and development of shellac-coated dosage forms. Staats-und Universitätsbibliothek Hamburg Carl von Ossietzky
Tamburini D, Dyer J, Bonaduce I (2017) The characterisation of shellac resin by flow injection and liquid chromatography coupled with electrospray ionisation and mass spectrometry. Sci Rep 7:1–5
Limmatvapirat S, Limmatvapirat C, Puttipipatkhachorn S (2007) Enhanced enteric properties and stability of shellac films through composite salts formation. Eur J Pharm Biopharm 67:690–698
Marareza H (2018) Modification of chemical properties of shellac with glycerol and acrylic acid. Key Eng Mater 789:87–91
Patel HS, Patel SJ (2010) Novel surface coating system based on maleated shellac. E-J Chem 7:55–60
Ansari MF, Sarkhel G (2017) Improving coating properties of shellac-epoxidised- novolac blends with melamine formaldehyde resin. Pigment Resin Technol 46:92–99
Ansari MF, Sarkhel G, Goswami DN, Baboo B (2014) Coating properties of shellac modified with synthesised epoxidised-novolac resin. Pigment Resin Technol 43:314–322
Pearnchob N, Siepmann J, Bodmeier R (2003) Pharmaceutical applications of shellac: moisture-protective and taste-masking coatings and extended-release matrix tablets. Drug Dev Ind Pharm 29:925–938
Limmatvapirat S, Limmatvapirat C, Luangtana-Anan M (2004) Modification of physicochemical and mechanical properties of shellac by partial hydrolysis. Int J Pharm 278:41–49
Hodgson DM, Gras E (2002) Recent developments in the chemistry of lithiated epoxides. Synthesis 27:1625–1642
Wang GA, Cheng WM, Tu YL (2006) Characterizations of a new flame-retardant polymer. Polym Degrad Stab 91:3344–3353
Li Q, Jiang P, Su Z (2005) Synergistic effect of phosphorus, nitrogen, and silicon on flame-retardant properties and char yield in polypropylene. J Appl Polym Sci 96:854–860
Gu J, Dang J, Wu Y (2012) Flame-retardant, thermal, mechanical and dielectric properties of structural non-halogenated epoxy resin composites. Polym Plast Technol Eng 51:1198–1203
Liu H, Wang X, Wu D (2015) Synthesis of a novel linear polyphosphazene-based epoxy resin and its application in halogen-free flame-resistant thermosetting systems. Polym Degrad Stab 118:45–58
Elayan A, Christopher W, Allen ESP (2017) Synthesis of poly(dichlorophosphazene) by the melt phase polymerization of p-trichloro-N-(dichlorophosphoryl)monophosphazene. J Inorg Organomet Polym Mater 27:119–123
Zhou X, Qiu S, Mu X (2020) Polyphosphazenes-based flame retardants: a review. CompositesPart B 202:108397
Liu Q, Wang D, Li Z (2020) Recent developments in the flame-retardant system of epoxy resin. Materials 13:2145
Salmeia KA, Gaan S, Malucelli G (2016) Recent advances for flame retardancy of textiles based on phosphorus chemistry. Polymers 8:319
Scharte B (2010) Phosphorus-based flame retardancy mechanisms-old hat or a starting point for future development? Materials 3:4710–4745
Qian X, Song L, Bihe Y (2014) Organic/inorganic flame retardants containing phosphorus, nitrogen and silicon: preparation and their performance on the flame retardancy of epoxy resins as a novel intumescent flame retardant system. Mater Chem Phys 143:1243–1252
Law KY (2014) Definitions for hydrophilicity, hydrophobicity, and superhydrophobicity: getting the basics right. J Phys Chem Lett 5:686–688
Gleria M (1999) Current research and applications of phosphazene materials. Phosphorus Res Bull 10:55–69
Van Krevelen DW, Nijenhuis KT (2009) Properties of polymers their correlation with chemical structuretheir numerical estimation and prediction from additive group contributions. Elsevier
Gu JW, Zhang GC, Dong SL, Zhang QY, Kong J (2007) Study on preparation and fire-retardant mechanism analysis of intumescent flame-retardant coatings. Surf Coatings Technol 201:7835–7841
Chen X, Jiao C (2008) Thermal degradation characteristics of a novel flame retardant coating using TG-IR technique. Polym Degrad Stab 93:2222–2225
Agrawal S, Narula AK (2014) Synthesis and characterization of phosphorus- and silicon-containing flame-retardant curing agents and a study of their effect on thermal properties of epoxy resins. J Coatings Technol Res 11:631–637
Carja ID, Serbezeanu D, Vlad-Bubulac T (2014) A straightforward, eco-friendly and cost-effective approach towards flame retardant epoxy resins. J Mater Chem A 2:16230–16241
Vlad-bubulac T, Hamciuc C, Petreus O (2005) Synthesis and properties of some phosphorus-containing polyesters. High Perform Polym 1:255–264
Satdive A, Mestry S, Borse P, Mhaske S (2020) Phosphorus- and silicon-containing amino curing agent for epoxy resin. Iran Polym J 29:433–443
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jhajharia, V., Patil, R., Mestry, S. et al. P- and Si-modified shellac for flame-retardant epoxy-based coatings. Iran Polym J 30, 907–916 (2021). https://doi.org/10.1007/s13726-021-00941-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13726-021-00941-w