Skip to main content
SpringerLink
Log in

Design and Development of Instrumentations for the Preparation of Platinum Single Crystals for Electrochemistry and Electrocatalysis Research. Part 2: Orientation, Cutting, and Annealing

  • Original Research
  • Published:
Electrocatalysis Aims and scope Submit manuscript

Abstract

In this contribution, which is the second paper in a series, we report on the design and development of several pieces of equipment, which facilitate the preparation of a hemispherical single crystal with a desired crystallographic surface structure starting with a spherical Pt single crystal. The pieces of equipment include a dual, high-resolution charge-coupled device (CCD)-based camera for acquiring Laue X-ray back-scattering patterns to orient spherical single crystals, a precision custom-designed jig for cutting and polishing pre-oriented single crystals, and an induction annealing system with controlled gaseous atmosphere for obtaining well-ordered and defect-free single crystal surfaces. Firstly, the paper describes the dual CCD camera setup, which allows acquiring, processing, and analyzing Laue back-scattering patterns in a digital format. The single crystal holder comprising a goniometer, the CCD-based detection system, and an optomechanical system together allow simple, adaptable, quick, and accurate single crystal orientation. Secondly, the paper presents details of a high-precision jig used in the cutting and polishing of single crystals. The jig setup includes a goniometer supporting a holder in which a single crystal is mounted and two micrometers. It maintains the desired single crystal surface parallel to the polishing disk on which abrasive materials are dispersed and polishing cloths are mounted. The micrometers allow monitoring the polishing rate and maintaining the desired single crystal surface exactly parallel to the polishing disk. Thirdly, the paper describes details of the annealing system. It consists of an induction-annealing furnace with a custom-made coil, a custom-designed quartz cell that facilitates single crystal annealing under controlled atmosphere conditions. Optimization of the induction annealing parameters and conditions, which determine the final quality of single crystal surfaces, is described in detail. Finally, the paper explains the unique aspects of this setup and methodically describes the operating procedures required to obtain a hemispherical single crystal with an atomically flat surface.

Visual representation of (111) Oriented Pt spherical single crystal and fcc(111) surface structure with their corresponding simulated and experimentally observed Laue diffraction pattern

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19

Similar content being viewed by others

References

  1. N. Arulmozhi, G. Jerkiewicz, Electrocatalysis 7, 507 (2016)

    Article  CAS  Google Scholar 

  2. A. Hamelin, in Modern Aspects of Electrochemistry, ed. by B. Conway, R. White, and J. Bockris, (Springer, New York, 1985), pp. 1–101

  3. E. Herrero, L.J. Buller, H.D. Abruña, Chem. Rev. 101, 1897 (2001)

    Article  CAS  Google Scholar 

  4. A.B. Greilinger, Zeitschrift Für Krist. - Cryst. Mater. 91, 424 (1935)

    Google Scholar 

  5. H. Erikson, US3330953 A (1967)

  6. D. Dickertmann, F.D. Koppitz, J.W. Schultze, Electrochim. Acta 21, 967 (1976)

    Article  CAS  Google Scholar 

  7. R. Butz, B. Krahl-Urban, K. Mench, Rev. Sci. Instrum. 44, 485 (1973)

    Article  CAS  Google Scholar 

  8. D.E. Johnson, Rev. Sci. Instrum. 39, 238 (1968)

    Article  Google Scholar 

  9. K. Geels, Metallographic and Materialographic Specimen Preparation, Light Microscopy, Image Analysis and Hardness Testing (ASTM International, West Conshohocken, 2011)

    Google Scholar 

  10. C. Tripa, J. Yates Jr., J. Vac. Sci. Technol. A 14, 2544 (1996)

    Article  CAS  Google Scholar 

  11. J. Yates, Experimental Innovation in Surface Science, 2nd edn. (Springer, Cham, 2015), pp. 155–166

    Book  Google Scholar 

  12. J.L. McCall, Metallographic Polishing by Mechanical Methods (ASM International, Materials Park, 1975)

    Google Scholar 

  13. Y.K. Chang, Rev. Sci. Instrum. 53, 515 (1982)

    Article  CAS  Google Scholar 

  14. C. Korzeniewski, V. Climent, J. M. Feliu, in Electroanalytical Chemistry: a Series of Advances, ed. by A. J. Bard, C. Zoski, Vol 24 (CRC, New York, 2011)

  15. J. Clavilier, R. Faure, G. Guinet, R. Durand, J. Electroanal. Chem. 107, 205 (1979)

    Article  Google Scholar 

  16. D. M. Kolb, F. C. Simeone, in Scanning Tunneling Microscopy in Surface Science, ed. by M. Bowker, P. R. Davies (Wiley, New York, 2009)

  17. L. A. Kibler, Preparation and Characterization of Noble Metal Single Crystal Electrode Surfaces (International Society of Electrochemistry, 2003)

  18. L.A. Kibler, A. Cuesta, M. Kleinert, D. Kolb, J. Electroanal. Chem. 484, 73 (2000)

    Article  CAS  Google Scholar 

  19. J. Tymoczko, W. Schuhmann, A.S. Bandarenka, Phys. Chem. Chem. Phys. 15, 12998 (2013)

    Article  CAS  Google Scholar 

  20. G.A. Attard, J.-Y. Ye, A. Brew, D. Morgan, P. Bergstrom-Mann, S.-G. Sun, J. Electroanal. Chem. 716, 106 (2014)

    Article  CAS  Google Scholar 

  21. A.S. Bondarenko, I.E.L. Stephens, I. Chorkendorff, Electrochem. Commun. 23, 33 (2012)

    Article  CAS  Google Scholar 

  22. S.E. Huxter, G.A. Attard, Electrochem. Commun. 8, 1806 (2006)

    Article  CAS  Google Scholar 

  23. http://www.neutronoptics.com/laue.html (accessed 16-May-2017)

  24. T.L. Einstein, in Handbook of Crystal Growth: Fundamentals, 2nd ed, ed. by T. Nishinaga, ch 5 (Elsevier, Amsterdam 2015)

  25. O. J. Schumann, Cologne Laue Indexation Program, (2009)

  26. http://clip4.sourceforge.net/ (accessed 16-May-2017)

  27. Metalog Guide (Struers, Denmark, 1992)

Download references

Acknowledgments

A grateful acknowledgment is made to the Catalysis Research for Polymer Electrolyte Fuel Cells (CaRPE-FC) Network, Natural Sciences and Engineering Research Council of Canada (NSERC), Canada Foundation for Innovation (CFI), and Queen’s University for their financial support. Dr. Alan Hewat (Neutronoptics) is acknowledged for his continuous technical support during the development of the Laue X-ray back-scattering single crystal orientation system. Dr. Olaf Schumann (CLIP software package) is acknowledged for updating the software in order to accommodate the custom-built camera’s digital data. David Moloney (Stuers) is acknowledged for his assistance in refining grinding and polishing procedures. David B. Magellan (Ambrell) is acknowledged for his help in designing the induction coil and testing of our samples at the Ambrell R&D facility. Georges Kopp (CanLabGlass) is acknowledged for designing and manufacturing highly specialized glassware. Dr. Gabriele Schatte and Derek Esau are acknowledged for their assistance in acquiring SEM images.

Author information

Authors and Affiliations

  1. Department of Chemistry, Queen’s University, 90 Bader Lane, Kingston, ON, K7L 3N6, Canada

    Nakkiran Arulmozhi & Gregory Jerkiewicz

Authors
  1. Nakkiran Arulmozhi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Gregory Jerkiewicz
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Gregory Jerkiewicz.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Arulmozhi, N., Jerkiewicz, G. Design and Development of Instrumentations for the Preparation of Platinum Single Crystals for Electrochemistry and Electrocatalysis Research. Part 2: Orientation, Cutting, and Annealing. Electrocatalysis 8, 399–413 (2017). https://doi.org/10.1007/s12678-017-0385-7

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12678-017-0385-7

Keywords

Search

Navigation