Skip to main content

Advertisement

SpringerLink
Log in

Processing and Characterization of Yttria-Dispersed INCONEL 718 ODS Alloy

  • Technical Paper
  • Published:
Transactions of the Indian Institute of Metals Aims and scope Submit manuscript

Abstract

Oxide dispersion strengthening is an effective method to improve the high-temperature mechanical properties of the alloys in which various reinforcements are added in the alloy matrix by mechanical milling and consolidating the mixture by different techniques like hot pressing, hot isostatic pressing and spark plasma sintering. This work presents the development of IN 718 ODS alloy by dispersing yttria in IN 718, which has improved mechanical properties at high temperatures. Yttria powder was added to IN 718 alloy powder in different weight fractions of 0.25, 0.5 and 1% and mechanically milled. The composite powders were consolidated by hot pressing and hot isostatic pressing (HIP). A small fraction of isolated porosities in the matrix was observed in hot-pressed samples which caused degradation of the mechanical properties. Percentage of porosities increased with the increase in yttria content. The hot-pressed samples were HIPed to heal the porosities. 0.5 wt% yttria-dispersed Inconel 718 hot-pressed compact exhibited better properties at 850 °C and showed 50 MPa improvement in ultimate compressive strength compared to Inconel 718 alloy.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  1. Geddes B, Leon H, and Huang X, Super Alloys—Alloying and Performance, ASM International, Geauga County (2010).

    Google Scholar 

  2. Elevated Temperature Characteristics of Engineering Materials, Heat Resistant Materials, ASM Specialty Handbook.

  3. Khalaj O, Masek B, Jirkova H, and Svoboda J, Int J Mater Metall Eng 11 (2017) 501.

    Google Scholar 

  4. Mohan M, Subramanian R, Alam M Z, and Angelo P C, Mater Technol 48 (2014) 899.

    Google Scholar 

  5. Pasebani S, Dutt A K, Burns J, Charit I, and Mishra R S, Mater Sci Eng A 630 (2015) 155.

    Article  Google Scholar 

  6. van de Voorde M H, Butil Soc Cat Cien XI (1991) 199.

    Google Scholar 

  7. Ricks R A, Porter A J, and Ecob R C, Acta Metall 31 (1983) 43.

    Article  Google Scholar 

  8. Capdevila C, Chen Y L, Jones A R, and Bhadeshia H K D H, ISIJ Int 43 (2003) 777.

    Article  Google Scholar 

Download references

Acknowledgements

The authors wish to thank Director, VSSC, for his permission to publish the work.

Author information

Authors and Affiliations

  1. Vikram Sarabhai Space Centre, Trivandrum, 695 022, India

    M. S. Dhanya, A. K. Shukla, S. Dineshraj, S. V. S. Narayana Murty & P. Ramesh Narayanan

  2. Liquid Propulsion Systems Center, Valiamala, Trivandrum, 695 547, India

    Ravi Ranjan Kumar

  3. Indian Institute of Space Science and Technology, Valiamala, Trivandrum, 695 547, India

    K. Prabhakaran

Authors
  1. M. S. Dhanya
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. K. Shukla
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Dineshraj
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Ravi Ranjan Kumar
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. K. Prabhakaran
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. S. V. S. Narayana Murty
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. P. Ramesh Narayanan
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to M. S. Dhanya.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Dhanya, M.S., Shukla, A.K., Dineshraj, S. et al. Processing and Characterization of Yttria-Dispersed INCONEL 718 ODS Alloy. Trans Indian Inst Met 72, 1395–1398 (2019). https://doi.org/10.1007/s12666-019-01649-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12666-019-01649-5

Keywords

Search

Navigation