Abstract
In this paper, stepped doping profile in alternate pillars and collector region of superjunction IGBT structure is presented. The proposed device structure consists of lightly and heavily doped region in upper and lower part of drift region. In addition to this, the collector layer doping concentration reduces along the x-direction. The initiation point of avalanche multiplication shifts from top and bottom corners to middle of the drift region. Due to this structural design, we have revealed that the area specific on resistance of proposed device is reduced by 16% at 300 K and 10% at 400 K without affecting breakdown voltage. Simulation results determine that 34.9% reduction in miller capacitance at room temperature in propose device. Additionally, 40% improvement in switching delay and 17% reduction in turn-off time is resulted. Baliga’s Figure of Merit (BFOM) and other technology Figure of Merit (FOM) are improved by 19% and 38% respectively. Furthermore, Eoff is reduced by 17.84% in proposed device.
Similar content being viewed by others
References
Trivedi M, Shenai K (1997) Trade-off in igbt safe operating area and performance parameters. In: Industry Applications Conference, Thirty-Second IAS Annual Meeting IAS’97 2, 949–954
Baliga BJ, Adler MS, Love RP, Gray PV, Zommer ND (1984) The insulated gate transistor: a new three-terminal mos-controlled bipolar power device. IEEE Transactions on Electron devices 31(6):821–828
Baliga BJ (2010) Fundamentals of power semiconductor devices Springer Science & Business Media
Iwamuro N, Laska T (2017) Igbt history, state-of-the-art, and future prospects. IEEE T Electron Dev 64 (3):741–752
Baliga BJ (2015) The IGBT device: physics, design and applications of the insulated gate bipolar transistor William Andrew
Antoniou M, Udrea F, Bauer F, Mihaila A, Nistor I (2011) Towards achieving the soft-punch-through superjunction insulated-gate bipolar transistor breakdown capability. IEEE Electron Device Lett 32(9):1275–1277
Feng H, Yang W, Onozawa Y, Yoshimura T, Tamenori A, Sin JK (2015) Transient turn-on characteristics of the fin p-body igbt. IEEE T Electron Dev 62(8):2555–2561
Antoniou M, Lophitis N, Udrea F, Bauer F, Vemulapati UR, Badstuebner U (2017) On the investigation of the anode side superjunction igbt design concept. IEEE Electron Device Lett 38(8):1063–1066
Parmar O, Naugarhiya A (2018) Incorporation of hafnium and platinum metal in vertical power MOSFETs. J Comput Electron 17(3):1241–1248
Nautiyal P, Naugarhiya A, Verma S (2019) Strained superjunction u-MOSFET with insulating layer between alternate pillars, Materials Research Express, vol. 6, no. 4, p 046424
Vudumula P, Kotamraju S (2019) Design and optimization of sic super-junction mosfet using vertical variation doping profile. IEEE T Electron Dev 66(3):1402–1408
Lin Z, Huang H, Chen X (2015) An improved superjunction structure with variation vertical doping profile. IEEE T Electron Dev 62(1):228–231
Zareiee M, Motto ER, Takahashi T, Fujii H, Satoh K (2019) A new Silicon structure for lateral double diffused MOSFET to control the breakdown voltage and the on-resistance 1–9
Bauer FD (2004) The super junction bipolar transistor: a new silicon power device concept for ultra low loss switching applications at medium to high voltages. Solid State Electron 48(5):705–714
Antoniou M, Udrea F, Bauer F (2010) The superjunction insulated gate bipolar transistor optimization and modeling. IEEE T Electron Dev 57(3):594–600
Oh K-H, Lee J, Lee K-H, Kim YC, Yun C (2006) A simulation study on novel field stop igbts using superjunction. IEEE T Electron Dev 53(4):884–890
Fujihira T (1997) Theory of semiconductor superjunction devices. Japanese journal of applied physics 36 (10R):6254
Huang H, Chen X (2012) Optimization of specific on-resistance of balanced symmetric superjunction mosfets based on a better approximation of ionization integral. IEEE T Electron Dev 59(10):2742–2747
Udrea F, Deboy G, Fujihira T (2017) Superjunction power devices, history, development, and future prospects. IEEE T Electron Dev 64(3):713–727
Minato T, Nitta T, Uenisi A, Yano M, Harada M, Hine S (2000) Which is cooler, trench or multi-epitaxy? Cutting edge approach for the silicon limit by the super trench power MOS - FET STM. In: International Symposium on Power Semiconductor Devices and ICs, pp 73–76
Alam M, Morisette DT, Cooper JA (2018) Design guidelines for superjunction devices in the presence of charge imbalance. IEEE T Electron Dev 65(8):3345–3351
Weinan D, Jing Z, Weifeng S, Yicheng D, Keqin H (2015) An improved trench gate super-junction igbt with double emitter, Journal of Semiconductors, vol. 36, no. 1, pp 014009
Donlon JF, Motto ER, Takahashi T, Fujii H, Satoh K (2008) Chip improvements for future igbt modules IEEE Industry Applications Society Annual Meeting 1–7
Blaabjerg F, Jaeger U, Nielsen SM, Pedersen JK (1995) Power losses in PWM-VSI inverter using NPT or PT IGBT devices. IEEE Transactions on power electronics 10(3):358–367
Winterhalter C, Kerkmanx R, Leggate D (2001) SchlegeP, D. In: Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2 995–1001
Gauen K (1989) The effects of MOSFET output capacitance in high frequency applications. In: Conference Record of the IEEE Industry Applications Society Annual Meeting, pp 1227–1234
Galluzzo A, Melito M, Belverde G, Musumeci S, Raciti A, Testa A (1993) Switching characteristic improvement of modern gate controlled devices. In: Fifth European Conference on Power Electronics and Applications, pp 374–379
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Gupta, N., Naugarhiya, A. 1.4kV Planar Gate Superjunction IGBT with Stepped Doping Profile in Drift and Collector Region. Silicon 13, 697–706 (2021). https://doi.org/10.1007/s12633-020-00456-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-020-00456-8