Abstract
To study the dynamic fracture toughness of granite under impact load, the dynamic stress intensity factor of I-type cracks was calculated based on a bending test for straight cut grooves in semi-circular discs. With the help of high-speed photography, the process of dynamic fracture failure was studied, and it was found that the cracks propagated rapidly in the dynamic fracture toughness test; initiation of cracks occurred at the crystal boundaries; then, the cracks propagated rapidly, accompanied by intracrystalline and cleavage cracks, followed by convergence, penetration, and ultimately failure. By performing surface three-dimensional reconstruction of sample cross-sections using the LM740 laser confocal microscope, the surface coarseness and surface three-dimensional reconstruction of the granite were determined, and relationships between the surface coarseness and crack propagation velocity and between the dynamic propagation toughness and crack propagation velocity were determined. The research results show that the average value of dynamic fracture toughness of the granite was 4.12 MPa m1/2, the crack propagation velocity during dynamic loading was 400–600 m/s, the maximum dynamic propagation toughness was 14.88 MPa m1/2, and the crack surface coarseness and crack dynamic propagation toughness exhibited exponential increasing trends with the increase in crack propagation velocity.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig2_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig3_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig4_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig5_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig6_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig7_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig8_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig9_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig10_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig11_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig12_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig13_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs12517-020-06182-0/MediaObjects/12517_2020_6182_Fig14_HTML.png)
Similar content being viewed by others
References
Aliha MRM, Ayatollahi MR (2014) Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading - a statistical approach. Theor Appl Fract Mec 69:17–25
American Society for Testing and Materials. (2014) Standard test method for plane strain fracture toughness of metallic materials. ASTM E399-06e2.
Amrollahi H, Baghbannan A, Hashemolhosseini H (2011) Measuring fracture toughness of crystalline marbles under modes I and II and mixed mode I-II loading conditions using CCNBD and HCCD specimens. Int J Rock Mech Min 48(7):1123–1134
Chen R, Xia K, Dai F, Wang YX (2009) Determination of dynamic fracture parameters using a semi-circular bend technique in split Hopkinson pressure bar testing. Eng Fract Mech 76(9):1268–1276
Dai F, Chen R, Iqbal MJ, Xia K (2010) Dynamic cracked chevron notched Brazilian disc method for measuring rock fracture parameter. Int J Rock Mech Min 47(4):606–613
Gao G, Huang S, Xia K (2015) Application of digital image correlation (DIC) in dynamic notched semi-circular bend (NSCB) tests. Exp Mech 55(1):95–104
Huang S, Feng XT, Xia K (2011) A dynamic punch method to quantify the dynamic shear strength of brittle solids. Rev Sci Instrum 82(5):053901
Iqbal N, Mohanty B (2006) Experimental calibration of stress intensity factors of the ISRM suggested cracked chevron-notched Brazilian disc specimen used for determination of mode-I fracture toughness. Int J Rock Mech Min 43(8):1270–1276
Iqbal N, Mohanty B (2007) Experimental calibration of ISRM suggested fracture toughness measurement techniques in selected brittle rocks. Rock Mech Rock Eng 40(5):453–475
Kolsky H (1953) Stress waves in solids. Clarendon Press, Oxford
Kuruppu MD, Obara Y, Ayatollahi MR, Chong KP, Funatsu T (2014) ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen. Rock Mech Rock Eng 47(1):267–274
Ravi-Chandar K (2004) Dynamic fracture. Elsevier Ltd, Amsterdam
Wang YB, Yang RS (2017) Study on the dynamic fracture characteristics of coal with a bending structure based on the NSCB impact test. Eng Fract Mech 184:319–338
Wang HJ, Zhao F, Huang ZQ, Yao YM, Yuan GX (2017) Experimental study of mode-I fracture toughness for layered shale based on two ISRM-suggested methods. Rock Mech Rock Eng 50(7):1933–1939
Wei MD, Dai F, Xu NW, Liu JF, Xu Y (2016) Experimental and numerical study on the cracked chevron notched semi-circular bend method for characterizing the mode I fracture toughness of rocks. Rock Mech Rock Eng 49(5):1595–1609
Wei MD, Dai F, Liu Y, Xu NW, Zhao T (2018) An experimental and theoretical comparison of CCNBD and CCNSCB specimens for determining mode I fracture toughness of rocks. Fatigue Fract Eng Mech 41(5):1002–1018
Yin TB, Li XB, Xia KW, Huang S (2012) Effect of thermal treatment on the dynamic fracture toughness of Laurentian granite. Rock Mech Rock Eng 45(6):1087–1094
Zhang QB, Zhao J (2014) Quasi-stastic and dynamic fracture behavior of rock materials: phenomena and mechanisms. Int J Fract 189:1–32
Zhou YX, Xia K, Li XB, Li HB, Ma GW, Zhao J, Zhou ZL, Dai F (2012) Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials. Int J Rock Mech Min 49:105–112
Zhou ZL, Cai X, Ma D, Cao WZ, Chen L, Zhou J (2018) Effects of water content on fracture and mechanical behavior of sandstone with a low clay mineral content. Eng Fract Mech 193:47–65
Acknowledgements
This study was supported by the Natural Science Foundation of Fujian Province (Grant No. 2018J01624), the National Natural Science Foundation of China (Grant nos. 51478118, 51678164), research and development fund of Fujian university of technology (Grant no. GY-Z17160), Key projects of Guangxi Natural Science Foundation (Grant no. 2017JJD150035), Natural Science Foundation of Zhejiang province (Grant No. LY20A020005) and Guangxi science and technology base and special foundation for talents (Grant no. 2017AD23050), we gratefully acknowledge these supports.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Responsible Editor: Amjad Kallel
Rights and permissions
About this article
Cite this article
Yang, X., Wu, B. & Zhang, Z. A study of fracture toughness of granite under impact load using three-dimensional reconstruction and high-speed photography techniques. Arab J Geosci 13, 1227 (2020). https://doi.org/10.1007/s12517-020-06182-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12517-020-06182-0