Abstract
Experimental and numerical studies were conducted on the cyclic behavior of steel reinforced concrete (SRC) columns with T-shaped and L-shaped steel section. A total of 8 SRC columns were tested under axial compression and lateral cyclic loading. The design details, loading procedure and main results, including the failure modes, hysteretic characteristics and ductility were reported. Four failure modes as flexural failure, shear bond failure, shear compression failure and shear compound failure were observed. By considering various unsymmetrical confinement and plastic hinge region, the experimental study was supplemented by numerical analysis to study the influence of axial compression ratio, shear-span ratio and concrete strength. The results revealed that the FEA is in good agreement with the experimental results. The ultimate loading of specimen with confinement effect has been improved by 21.4%–33.8%. The failure modes is dominated by the shear-span ratio and type of cross section. The specimens with smaller shear-span ratio are prone to shear failure, while the unsymmetrical steel arrangement causes shear compound failure which is combined with shear bond failure and shear compression failure. Moreover, the specimens with larger shear-span ratio and stirrup ratio present greater deformation capacity and ductility. In practical engineering, the confinement degree of SRC columns with unsymmetrical steel section can be enhanced by increasing the stirrup ratio and arranging the cross ties.
Similar content being viewed by others
References
Callejo A, Bauchau OA, Diskin B (2019) Adjoint method for the sensitivity analysis of composite beam cross-sections. Computers & Structures 213:100–111, DOI: https://doi.org/10.1016/j.compstruc.2018.12.004
Chen CC, Chen CC, Hoang TT (2016) Role of concrete confinement of wide-flange structural steel shape in steel reinforced concrete columns under cyclic loading. Engineering Structures 110:79–87, DOI: https://doi.org/10.1016/j.engstruct.2015.12.002
Chen CC, Lin NJ (2006) Analytical model for predicting axial capacity and behavior of concrete encased steel composite stub columns. Journal of Constructional Steel Research 62(5):424–433, DOI: https://doi.org/10.1016/j.jcsr.2005.04.021
Chiu L, Falzon BG, Boman R Chen B, Yan W (2015) Finite element modelling of composite structures under crushing load. Composite Structures 131:215–228, DOI: https://doi.org/10.1016/j.compstruct.2015.05.008
Dundar C, Tokgoz S, Tanrikulu AK, Baran T (2008) Behaviour of reinforced and concrete-encased composite columns subjected to biaxial bending and axial load. Building and Environment 43(6): 1109–1120, DOI: https://doi.org/10.1016/j.buildenv.2007.02.010
Ellobody E, Young B (2011) Numerical simulation of concrete encased steel composite columns. Journal of Constructional Steel Research 67(2):211–222, DOI: https://doi.org/10.1016/j.jcsr.2010.08.003
Fang L, Zhang B, Jin GF, Li KW, Wang ZL (2015) Seismic behavior of concrete-encased steel cross-shaped columns. Journal of Constructional Steel Research 109:24–33, DOI: https://doi.org/10.1016/j.jcsr.2015.03.001
Gautham A, Sahoo DR (2021) Behavior of steel-reinforced composite concrete columns under combined axial and lateral cyclic loading. Journal of Building Engineerin 39(9):102305, DOI: https://doi.org/10.1016/j.jobe.2021.102305
GB/T228–2002 (2002) Metallic materials — Tensile testing at ambient temperature. GB/T228-2002, General Administration of Quality Supervision, Inspection and Quarantine of China, Beijing, China
Ghannoum WM, Moehle JP (2012) Dynamic collapse analysis of a concrete frame sustaining column axial failures. ACI Structural Journal 109(23):403–412, DOI: https://doi.org/10.14359/51683754
Hameed R, Turatsinze A, Duprat F, Sellier A (2013) Bond stress-slip behaviour of steel reinforcing bar embedded in hybrid fiber-reinforced concrete. KSCE Journal of Civil Engineering 17(7):1700–1707, DOI: https://doi.org/10.1007/s12205-013-1240-x
Harajli MH (2010) Bond behavior in steel fiber-reinforced concrete zones under static and cyclic loading: Experimental evaluations and analytical modeling. Journal of Materials in Civil Engineering 22(7):674–686, DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000067
Ji X, Kang H, Chen X, Qian J (2014) Seismic behavior and strength capacity of steel tube-reinforced concrete composite columns. Earthquake Engineering & Structural Dynamics 43(4):487–505, DOI: https://doi.org/10.1002/eqe.2354
Ji X, Sun Y, Qian J (2015) Seismic behavior and modeling of steel reinforced concrete (SRC) walls. Earthquake Engineering & Structural Dynamics 44(6):955–972, DOI: https://doi.org/10.1002/eqe.2494
Lee TK, Pan A (2001) Analysis of composite beam-columns under lateral cyclic loading. Journal of Structural Engineering 127(2): 186–193, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(186)
Lehman D, Moehle J, Mahin S (2004) Experimental evaluation of the seismic performance of reinforced concrete bridge columns. Journal of Structural Engineering 130(6):869–879, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2004)130:6(869)
Liang CY, Chen CC, Weng CC, Yin YL, Wang JC (2014) Axial compressive behavior of square composite columns confined by multiple spirals. Journal of Constructional Steel Research 103:230–240, DOI: https://doi.org/10.1016/j.jcsr.2014.09.006
Mander JB (1988) Theoretical stress-strain model or for confined concrete. Journal of Structural Engineering 114, DOI: https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
Martínez-Rueda JE, Elnashai AS (1997) Confined concrete model under cyclic load. Materials & Structures 30(3):139–147, DOI: https://doi.org/10.1007/BF02486385
Park R, Priestley M, Gill WD (1982) Ductility of square-confined concrete columns. Journal of the Structural Division 108(4):929–950
Pedro RM, Hsu CT (1997) Behavior of biaxially loaded concrete-encased composite columns. Journal of Structural Engineering 123(9), DOI: https://doi.org/10.1061/(ASCE)0733-9445(1997)123:9(1163)
Ricles JM, Paboojian SD (1994) Seismic performance of steel-encased composite columns. Journal of Structural Engineering 120(8):2474–2494, DOI: https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2474)
Ricles JM, Sause R, Garlock MM, Zhao C (2001) Posttensioned seismic-resistant connections for steel frames. Journal of Structural Engineering 127(2):113–121, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(113)
Saatcioglu M, Razvi SR (1992) Strength and ductility of confined concrete. Journal of Structural Engineering 118(6):1590–1607, DOI: https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1590)
Xiang S, Zeng L, Liu YH, Mo JX, Chen J (2020) Experimental study on the dynamic behavior of T-shaped steel reinforced concrete columns under impact loading. Engineering Structures 208:110307, DOI: https://doi.org/10.1016/j.engstruct.2020.110307
Xiang S, Zeng L, Zhang JC, Chen J, Liu YH, Cheng GY, Mo JX (2019) A DIC-based study on compressive responses of concrete after exposure to elevated temperatures. Materials 12(13):2044, DOI: https://doi.org/10.3390/ma12132044
Xiao YF, Zeng L, Cui ZK, Jin SQ, Chen YG (2017) Experimental and analytical performance evaluation of steel beam to concrete-encased composite column with unsymmetrical steel section joints. Steel & Composite Structures 23(1):17–29, DOI: https://doi.org/10.12989/scs.2017.23.1.017
Xie YP, Jia L, Gang S (2013) Study on plastic hinge length and limit curvature of RC column. Applied Mechanics & Materials 351–352:378–381, DOI: https://doi.org/10.4028/www.scientific.net/AMM.351-352.378
Xu CX, Peng S, Deng J, Wan C (2018) Study on seismic behavior of encased steel jacket-strengthened earthquake-damaged composite steel-concrete columns. Journal of Building Engineering 17:154–166, DOI: https://doi.org/10.1016/j.jobe.2018.02.010
Yang Y, Wang Y, Fu F, Liu J (2015) Static behavior of T-shaped concrete-filled steel tubular columns subjected to concentric and eccentric compressive loads. Thin-Walled Structures 95:374–388, DOI: https://doi.org/10.1016/j.tws.2015.07.009
Yu T, Lin G, Zhang SS (2016) Compressive behavior of frp-confined concrete-encased steel columns. Composite Structures 154:493–506, DOI: https://doi.org/10.1016/j.compstruct.2016.07.027
Yu T, Teng JG, Wong YL, Dong SL (2010) Finite element modeling of confined concrete — II: Plastic-damage model. Steel Construction 32(3): 680–691, DOI: https://doi.org/10.1016/j.engstruct.2009.11.013
Yuan W, Zhao J, Sun Y, Zeng L (2018) Experimental study on seismic behavior of concrete walls reinforced by PC strands. Engineering Structures 175:577–590, DOI: https://doi.org/10.1016/j.engstruct.2018.08.091
Zeng L, Xiao YF, Chen YG, Jin SQ, Wei X, Li XJ (2017) Seismic damage evaluation of concrete-encased steel frame-reinforced concrete core tube buildings based on dynamic characteristics. Applied Sciences 7(4):314, DOI: https://doi.org/10.3390/app7040314
Zhang YF, Zhao JH, Cai CS (2012) Seismic behavior of ring beam joints between concrete-filled twin steel tubes columns and reinforced concrete beams. Engineering Structures 39:1–10, DOI: https://doi.org/10.1016/j.engstruct.2012.01.014
Zhao J, Sri S (2007) Modeling of strain penetration effects in fiber-based analysis of reinforced concrete structures. ACI Structural Journal 104(2):133–141
Zhao XZ, Wen FP, Chan TM, Cao S (2019) Theoretical stress-strain model for concrete in steel-reinforced concrete columns. Journal of Structural Engineering 145(4):04019009.1-04019009.19, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002289
Acknowledgments
The author is very grateful to the National Natural Science Foundation of China (Grant number 51978078 and 51108041), and the Natural Science Foundation of Hubei Province of China (Grant number 2016CFB604).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, X., Zeng, L., Xiao, Y. et al. Experimental and Numerical Investigation on the Cyclic Behavior of SRC Columns considering Unsymmetrical Confinement Effect. KSCE J Civ Eng 26, 1880–1893 (2022). https://doi.org/10.1007/s12205-021-1073-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-021-1073-y