Abstract
To improve the chemical resistance of non-isocyanate polyurethane (NIPU), two kinds of diglycidyl ether, bisphenol AF (E-AF) and perfluorooctyl glycidyl ether (PFGE), were selected to synthesize two different cyclic carbonates, bisphenol AF (EC-AF) and perfluorooctyl cyclic carbonate (PFGC), respectively. These cyclic carbonates were successfully used to prepare fluorine-containing non-isocyanate polyurethane coatings. The effects of PFGC amounts on the properties of NIPU were studied, and it was found that the contact angles of water, diiodomethane, and hexadecane were increased with the addition of PFGC and up to 106.7°, 80.2°, and 72.7°, respectively, whereas the pendulum hardness of NIPU coatings relatively decreased with the increase in PFGC contents. The NIPU coatings exhibited excellent flexibility, adhesion, and impact resistance. They also displayed good thermal stability with 5% weight loss temperature (T5%) ranging from 249 to 271°C. Moreover, these coatings possessed very low water uptake, excellent hydrophobic/oleophobic properties, and corrosion resistance properties.
Similar content being viewed by others
References
Chattopadhyay, DK, Raju, KVSN, “Structural Engineering of Polyurethane Coatings for High Performance Applications.” Prog. Polym. Sci., 32 (3) 352–418 (2007)
Chattopadhyay, DK, Webster, DC, “Thermal Stability and Flame Retardancy of Polyurethanes.” Prog. Polym. Sci., 34 (10) 1068–1133 (2009)
Etienne, D, Jean-Pierre, P, Bernard, B, François, G, “On the Versatility of Urethane/Urea Bonds: Reversibility, Blocked Isocyanate, and Non-isocyanate Polyurethane.” Chem. Rev., 113 (1) 80–118 (2013)
Zhang, C, Garrison, TF, Madbouly, SA, Kessler, MR, “Recent Advances in Vegetable Oil-Based Polymers and Their Composites.” Prog. Polym. Sci., 71 (1) 91–143 (2017)
Cornille, A, Auvergne, R, Figovsky, O, Boutevin, B, Caillol, S, “A Perspective Approach to Sustainable Routes for Non-isocyanate Polyurethanes.” Eur. Polym. J., 87 (1) 535–552 (2017)
Grignard, B, Thomassin, JM, Gennen, S, Poussard, L, Bonnaud, L, Raquez, JM, Dubois, P, Tran, MP, Park, CB, Jerome, C, “CO2-Blown Microcellular Non-isocyanate Polyurethane (NIPU) Foams: From Bio- and CO2-Sourced Monomers to Potentially Thermal Insulating Materials.” Green Chem., 18 (7) 2206–2215 (2016)
Maisonneuve, L, Lamarzelle, O, Rix, E, Grau, E, Cramail, H, “Isocyanate-Free Routes to Polyurethanes and Poly(Hydroxy Urethane)s.” Chem. Rev., 115 (22) 12407–12439 (2015)
Hannes, B, Maria, F, Moritz, BH, Rolf, M, “Isocyanate- and Phosgene-Free Routes to Polyfunctional Cyclic Carbonates and Green Polyurethanes by Fixation of Carbon Dioxide.” Macromol. Rapid Commun., 35 (14) 1238–1254 (2014)
Caillol, S, Dolci, E, Fouquay, S, Boutevin, B, Simon, F, Michaud, G, “Remendable Thermosetting Polymers for Isocyanate-Free Adhesives: A Preliminary Study.” Polym. Chem., 6 (45) 7851–7861 (2015)
Blain, M, Jean-Gérard, L, Rémi, A, Benazet, D, Caillol, S, Andrioletti, B, “Rational Investigations in the Ring Opening of Cyclic Carbonates by Amines.” Green Chem., 16 (9) 4286–4291 (2014)
Lambeth, RH, Henderson, TJ, “Organocatalytic Synthesis of (Poly)Hydroxyurethanes from Cyclic Carbonates and Amines.” Polymer, 54 (21) 5568–5573 (2013)
Tomita, H, Sanda, F, Endo, T, “Model Reaction for the Synthesis of Polyhydroxyurethanes from Cyclic Carbonates with Amines: Substituent Effect on the Reactivity and Selectivity of Ring-Opening Direction in the Reaction of Five-Membered Cyclic Carbonates with Amine.” J. Polym. Sci. Pol. Chem., 39 (21) 3678–3685 (2001)
He, Y, Keul, H, Möller, M, “Synthesis, Characterization, and Application of a Bifunctional Coupler Containing a Five- and a Six-Membered Ring Carbonate.” React. Funct. Polym., 71 (2) 175–186 (2011)
Bähr, M, Bitto, A, Mülhaupt, R, “Cyclic Limonene Dicarbonate as a New Monomer for Non-isocyanate Oligo- and Polyurethanes (NIPU) Based Upon Terpenes.” Green Chem., 14 (5) 1447–1454 (2012)
Zhang, L, Luo, X, Qin, Y, Li, Y, “A Novel 2,5-Furandicarboxylic Acid-Based Bis(Cyclic Carbonate) for the Synthesis of Biobased Non-isocyanate Polyurethanes.” RSC Adv., 7 (1) 37–46 (2016)
Fleischer, M, Blattmann, H, Mülhaupt, R, “Glycerol-, Pentaerythritol- and Trimethylolpropane-Based Polyurethanes and Their Cellulose Carbonate Composites Prepared via the Non-isocyanate Route with Catalytic Carbon Dioxide Fixation.” Green Chem., 15 (4) 934–942 (2013)
Liu, G, Wu, G, Chen, J, Huo, S, Jin, C, Kong, Z, “Synthesis and Properties of POSS-Containing Gallic Acid-Based Non-isocyanate Polyurethanes Coatings.” Polym. Degrad. Stab., 121 247–252 (2015)
Liu, G, Wu, G, Chen, J, Kong, Z, “Synthesis, Modification and Properties of Rosin-Based Non-isocyanate Polyurethanes Coatings.” Prog. Org. Coat., 101 461–467 (2016)
Blattmann, H, Mülhaupt, R, “Multifunctional β-Amino Alcohols as Bio-Based Amine Curing Agents for the Isocyanate- and Phosgene-Free Synthesis of 100% Bio-Based Polyhydroxyurethane Thermosets.” Green Chem., 18 (8) 2406–2415 (2016)
Blattmann, H, Mülhaupt, R, “Multifunctional POSS Cyclic Carbonates and Non-isocyanate Polyhydroxyurethane Hybrid Materials.” Macromolecules, 49 (3) 742–751 (2016)
Wu, Z, Cai, W, Chen, R, Qu, J, “Synthesis and Properties of Ambient-Curable Non-isocyanate Polyurethanes.” Prog. Org. Coat., 119 116–122 (2018)
Wu, Z, Dai, J, Tang, L, Qu, J, “Sorbitol-Based Aqueous Cyclic Carbonate Dispersion for Waterborne Nonisocyanate Polyurethane Coatings via an Environment-Friendly Route.” J. Coat. Technol. Res. https://doi.org/10.1007/s11998-018-0150-8
Danielle, M, Muhammad, R, Grozea, CM, Guojun, L, Yu, W, Alison, C, Martin, W, “Clear Antismudge Unimolecular Coatings of Diblock Copolymers on Glass Plates.” ACS Appl. Mater. Inter., 6 (23) 21435–21445 (2014)
Darmanin, T, Guittard, F, “Superoleophobic Surfaces with Short Fluorinated Chains?” Soft Matter, 9 (25) 5982–5990 (2013)
Martinelli, E, Fantoni, C, Gallot, B, Glisenti, A, Galli, G, “Polystyrene–Polyperfluorooctylethyl Acrylate Diblock Copolymers: The Effect of Dilution of the Fluorinated Mesogenic Chains on Bulk and Surface Properties.” Macromol Sym., 296 (1) 294–302 (2010)
Trombetta, T, Iengo, P, Turri, S, “Fluorinated Segmented Polyurethane Anionomers for Water–Oil Repellent Surface Treatments of Cellulosic Substrates.” J Appl. Polym. Sci., 98 (3) 1364–1372 (2010)
Zhao, X, Ding, J, Ye, L, “Structure and Solvent-Resistant Property of Fluorinated Polyurethane Elastomer.” J. Fluor. Chem., 159 38–47 (2014)
Shin, MS, Lee, YH, Rahman, MM, Kim, HD, “Synthesis and Properties of Waterborne Fluorinated Polyurethane-Acrylate Using a Solvent-/Emulsifier-Free Method.” Polymer, 54 (18) 4873–4882 (2013)
Acknowledgments
This work was financially supported by the National Natural Science Foundation of China (No. 21878109), and the Science and Technology Program of Guangdong Province, China (Nos. 2015A010105010, 2015B090925006, 2016B090930005, and 2016B030302004).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wu, Z., Tang, L., Dai, J. et al. Synthesis and properties of fluorinated non-isocyanate polyurethanes coatings with good hydrophobic and oleophobic properties. J Coat Technol Res 16, 1233–1241 (2019). https://doi.org/10.1007/s11998-019-00195-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-019-00195-5