Abstract
The microstructure, precipitates, fracture morphology, and mechanical properties of both the Ti microalloyed rebars during the rolling process and the final product were characterized using optical microscopy, scanning electron microscopy, transmission electron microscopy, and a universal tensile testing machine. The results indicated that the precipitation of Ti in deformed austenite can inhibit the recrystallization of austenite and refine its grains. The stability of undercooled austenite improves with an increase in Ti content, leading to a reduction in the transformation temperature of ferrite (F) and pearlite (P), refinement of the microstructure, and promotion of bainite (B) transformation. The reduction in F grain size and increase in B are advantageous for improving the strength and tensile/yield of rebars. However, the elongation at maximum force and elongation after fracture decrease. When the Ti content exceeds 0.06%, the strength change of the rebar is primarily governed by the B. A continuous increase in stress during the tensile process, the disappearance of the yield plateau, and a decrease in ductility are caused by the increase in dislocation density and precipitates in the rebar. Better mechanical properties are exhibited by the rebar when the Ti content is 0.028%.
Similar content being viewed by others
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Z.Y. Zeng, C.R. Li, Z.Y. Li, Y.Q. Zhai, J. Wang, and Z.S. Li, Mater. Sci. Eng. A 840, 142929. https://doi.org/10.1016/j.msea.2022.142929 (2022).
W. Choi, H. Um, H. Yi, and N. Kang, Mater. Des. 219, 110766. https://doi.org/10.1016/j.matdes.2022.110766 (2022).
P.P. Wang, Study on the Technology of Niobium-Vanadium Micro-Alloying Hot Rolled Ribbed Rebar (Xi’an University of Architecture and Technology, Xian, 2019).
G. Xu, X.L. Gan, G.J. Ma, F. Luo, and H. Zou, Mater. Des. 31, 2891. https://doi.org/10.1016/j.matdes.2009.12.032 (2010).
Z.H. Wu, W. Zheng, G.Q. Li, H. Matsuura, and F. Tsukihashi, Metall. Mater. Trans. B 46, 1226. https://doi.org/10.1007/s11663-015-0311-4 (2015).
B. López, and J.M. Rodriguez-Ibabe, Metall. Mater. Trans. A 48, 1. https://doi.org/10.1007/s11661-016-3727-9 (2017).
X.L. Gan, Q. Yuan, G. Zhao, H.J. Hu, J.Y. Tian, and G. Xu, Steel Res. Int. 90, 1. https://doi.org/10.1002/srin.201900040 (2019).
S.P. Chaudhuri, R.K. Mahanti, C.S. Sivaramakrishnan, and M.P. Singh, Mater. Des. 23, 489. https://doi.org/10.1016/S0261-3069(02)00011-0 (2002).
Z.W. Peng, L.J. Li, J.X. Gao, and X.D. Huo, Mater. Sci. Eng. A 657, 413. https://doi.org/10.1016/j.msea.2016.01.064 (2016).
S.Z. Wang, Z.J. Gao, G.L. Wu, and X.P. Mao, Int. J. Min. Met. Mater. 9, 45. https://doi.org/10.1007/s12613-021-2399-7 (2022).
Q.Y. Sha, and Z.Q. Sun, Mater. Sci. Eng. A 523, 77. https://doi.org/10.1016/j.msea.2009.05.037 (2009).
M. Ohno, C. Murakami, K. Matsuura, and K. Isobe, ISIJ Int. 52, 1832. https://doi.org/10.2355/isijinternational.52.1832 (2012).
X. Luo, C.S. Yang, Y.L. Kang, and J.H. Li, Chin. J. Eng. 38, 230. https://doi.org/10.13374/j.issn2095-9389.2016.02.011 (2016).
N.J. Petch, J. Iron Steel Inst. 174, 25 (1953).
W.B. Morrison, ASM-Trans. 59, 824 (1966).
A.T. Davenport, L.C. Brossard, and R.E. Miner, JOM 27, 21–27. https://doi.org/10.1007/BF03355951 (1975).
A.T. Davenport, F.G. Berry, and R.W.K. Honeycombe, Met. Sci. 2, 04. https://doi.org/10.1179/030634568790443341 (1967).
H.W. Yen, P.Y. Chen, C.Y. Huang, and J.R. Yang, Acta Mater. 59, 6264. https://doi.org/10.1016/j.actamat.2011.06.037 (2011).
Z.G. Peng, L.J. Li, S.J. Chen, X.D. Huo, and J.X. Gao, Mater. Design. 108, 289. https://doi.org/10.1016/j.matdes.2016.06.108 (2016).
X.P. Mao, Titanium Microalloyed Steel (Metallurgical Industry Press, Beijing, 2006), pp. 181–185.
Z.Z. Liu, Niobium Science & Technology (Metallurgical Industry Press, Beijing, 2019), pp115–128.
P.K. Patra, S. Sam, M. Singhai, S.S. Hazra, G.D.J. Ram, and S.R. Bakshi, Trans. Indian Inst. Met. 70, 1773. https://doi.org/10.1007/s12666-016-0975-8 (2017).
S.H. He, B.B. He, K.Y. Zhu, and M.X. Huang, Acta Mater. 149, 46. https://doi.org/10.1016/j.actamat.2018.02.023 (2018).
N. Li, W. Kingkam, R. Han, M. Tang, and C. Zhao, Mater. Res. Express 7, 066521. https://doi.org/10.1088/2053-1591/ab9b14 (2020).
A. Karmakar, S. Biswas, S. Mukherjee, D. Chakrabarti, and V. Kumar, Mater. Sci. Eng. A 690, 158. https://doi.org/10.1016/j.msea.2017.02.101 (2017).
S. Ghosh, and S. Mula, Mater. Sci. Eng. A 646, 218. https://doi.org/10.1016/j.msea.2015.08.072 (2015).
V.V. Natarajan, S. Liu, V.S.A. Challa, R.D.K. Misra, D.M. Sidorenko, M.D. Mulholland, M. Manohar, and J.E. Hartmann, Mater. Sci. Eng. A 671, 254. https://doi.org/10.1016/j.msea.2016.06.061 (2016).
S. Vervynckt, K. Verbeken, P. Thibaux, and Y. Houbaert, Mater. Sci. Eng. A 528, 5519. https://doi.org/10.2355/isijinternational.49.911 (2011).
H. Buken, P. Sherstnev, and E. Kozeschnik, Mater. Sci. Forum 879, 2463. https://doi.org/10.4028/www.scientific.net/MSF.879.2463 (2016).
S. Vervynckt, K. Verbeken, P. Thibaux, M. Liebeherr, and Y. Houbaert, ISIJ Int. 49, 469. https://doi.org/10.2355/isijinternational.49.911 (2009).
W.F. Shen, C. Zhang, L.W. Zhang, Y.N. Xia, Y.F. Xu, X.H. Shi, and J. Mater, Res. 32, 656. https://doi.org/10.1557/jmr.2016.486 (2017).
D.R.N. Maubane, C.W. Siyasiya, K.M. Banks, and W.E. Stumpf, Mater. Sci. Forum 941, 46. https://doi.org/10.4028/www.scientific.net/MSF.941.46 (2018).
S.F. Medina, and J.E. Mancilla, ISIJ Int. 36, 1063. https://doi.org/10.2355/isijinternational.36.1063 (1996).
X.P. Mao, X.D. Huo, X.J. Sun, and Y.Z. Chai, J. Mater. Process Tech. 210, 1660. https://doi.org/10.1016/j.jmatprotec.2010.05.018 (2010).
R. Han, G. Yang, X. Sun, G. Zhao, X. Liang, and X. Zhu, Acta Metall. Sin. 58, 1589. https://doi.org/10.11900/0412.1961.2021.00560 (2022).
S. Shanmugam, R.D.K. Misra, T. Mannering, D. Panda, and S.G. Jansto, Mater. Sci. Eng. A 437, 436. https://doi.org/10.1016/j.msea.2006.08.007 (2006).
C. Lu, Research on the Relationship Between Isothermal Transformation and Precipitation in Low Carbon Ti/Mo Steel (Jangsu University, Zhenjiang, 2022).
A.M. Ravi, J. Sietsma, and M.J. Santofimia, Acta Mater. 105, 155. https://doi.org/10.1016/j.actamat.2015.11.044 (2016).
S.M.C. Van Bohemen, Metall. Mater. Trans. A 41, 285. https://doi.org/10.1007/s11661-009-0106-9 (2010).
T. Teshima, M. Kosaka, K. Ushioda, N. Koga, and N. Nakada, Mater. Sci. Eng. A 679, 223. https://doi.org/10.1016/j.msea.2016.10.018 (2017).
P.W. Xu, Y. Liang, J. Lia, and C. Meng, Mater. Sci. Eng. A 745, 176. https://doi.org/10.1016/j.msea.2018.12.069 (2019).
G. Mandal, S.K. Ghosh, S. Bera, and S. Mukherjee, Mater. Sci. Eng. A 676, 56. https://doi.org/10.1016/j.msea.2016.08.094 (2016).
B. Avishan, C. Garcia-Mateo, L. Morales-Rivas, S. Yazdani, and F.G. Caballero, J. Mater. Sci. 48, 6121. https://doi.org/10.1007/s10853-013-7408-4 (2013).
X.X. Zhang, G. Xu, X. Wang, D. Embury, O. Bouaziz, G.R. Purdy, and H.S. Zurob, Metall. Mater. Trans. 45, 1352. https://doi.org/10.1007/s11661-013-2079-y (2014).
L.Y. Zhao, Q.F. Wang, G.H. Shi, X.Y. Yang, M.L. Qiao, J.P. Wu, and F.C. Zhang, Mater. Sci. Eng. A 854, 143681. https://doi.org/10.1016/j.msea.2022.143681 (2022).
Y. Hui, H. Pan, N. Zhou, R. Li, W. Li, and K. Liu, Acta Metall. Sin. 51, 1481. https://doi.org/10.11900/0412.1961.2015.00082 (2015).
C. Gu, C. Scott, F. Fazeli, M.J. Gaudet, J. Su, X. Wang, N. Bassim, and H. Zurob, Mat. Sci. Eng. A 880, 145332. https://doi.org/10.1016/j.msea.2023.145332 (2023).
H.B. Cao, and W. Chen, Fusion Eng. Des. 190, 113645. https://doi.org/10.1016/j.fusengdes.2023.113645 (2023).
A. Iza-Mendia, and I. Gutierrez, Mater. Sci. Eng. A 561, 40. https://doi.org/10.1016/j.msea.2012.10.012 (2013).
K. Zhang, X. Sun, Q. Yong, Z. Li, G. Yang, and Y. Li, Acta Metall. Sin. 51, 553. https://doi.org/10.11900/0412.1961.2014.00470 (2015).
Acknowledgements
This work has received funding from Jiangsu Yonggang Group Co., Ltd.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
This article does not contain any studies with human participants or animals performed by any of the authors.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Lu, C., Yin, S., Ma, Z. et al. Effect of Ti Content on Microstructure Evolution and Mechanical Properties of High-Strength Anti-seismic Rebar. JOM (2024). https://doi.org/10.1007/s11837-024-06522-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11837-024-06522-5