Abstract
The deleterious effects of brittle and rigid oxides on the quality of high-speed railway wheel steel can be mitigated by wrapping the oxides with sulfides. The investigation reveals the presence of three types of oxide–sulfide complex inclusions in the continuous casting billet. Type 1 possesses a core oxide with high CaO content, and its shell sulfide predominantly comprises CaS. Type 2 presents a core oxide with low CaO content, accompanied by a (Mn,Ca)S shell. The core oxide in Type 3 contains almost no CaO, and the shell sulfide is primarily MnS. The area ratio, defined as the ratio of sulfide area to oxide area, increases successively among the three types of complex inclusions. The formation mechanisms of the three types of complex inclusions vary. In Type 1, the core oxide originates from the refining process. The CaS in the shell sulfide is a product of the reaction between Al and S in the liquid steel and CaO in the oxide. In Type 2, the core oxide is formed during the cooling and solidification process. As the liquid steel solidifies, the segregation of Ca, Mn, and S leads to the formation of (Mn,Ca)S shell around the oxide. The formation temperature of the core oxide in Type 3 is lower than that of Type 1 and Type 2, occurring in the late stages of solidification. A substantial amount of MnS is formed around the oxide near the end of solidification. In the finished wheel, Type 2, characterized by its (Mn,Ca)S shell, exhibits appropriate hardness and resistance to deformation, rendering it the most optimal among three types of complex inclusions.
Similar content being viewed by others
References
A. Ekberg and P. Sotkovszki: Int. J. Fatigue, 2001, vol. 23, pp. 29–43.
M. Yamamoto: Nippon Steel Sumitomo Met. Tech. Rep., 2013, vol. 105, pp. 34–40.
V.V. Tyagnii, A.P. Stovpchenko, L.V. Chuprina, G.A. Pol’skii, Y.N. Grishchenko, and A.D. Rozhkova: Metallurgist, 2006, vol. 50, pp. 426–32.
T. Sjöqvist, S. Jung, P. Jönsson, and M. Andreasson: Ironmak. Steelmak., 2000, vol. 27, pp. 373–80.
Y. Tang: Adv. Mater. Res., 2013, vol. 675, pp. 264–69.
Y. Ren, W. Yang, and L.F. Zhang: ISIJ Int., 2022, vol. 62, pp. 2159–71.
G.F. Mi, H.Y. Nan, Y.L. Liu, B. Zhang, H. Zhang, and G.X. Song: J. Iron. Steel Res. Int., 2011, vol. 18, pp. 49–54.
L. Luyckx, J.R. Bell, A. McLean, and M. Korchynsky: Metall. Trans., 1970, vol. 1, pp. 3341–50.
Z.L. Xue, N. Li, L. Wang, S.Q. Song, D.M. Liu, and A. Huang: Metall. Mater. Trans. B, 2021, vol. 52B, pp. 3860–74.
C. Sheng, Q. Lu, J.B. Guo, and Z. Yang: Steel Iron, 2021, vol. 56, pp. 62–67.
X.Y. Li, W.M. Wu, Y. Chen, H. Zhao, C. Sheng, and Y.Z. He: Iron Steel Vanadium Titanium, 2021, vol. 42, pp. 199–204.
X. Guo, M. Tan, T. Li, K. Liu, B. Shang, J. Dang, and X.M. Ding: Int. J. Metalcast., 2023, vol. 17, pp. 2741–53.
J.L. Lu, G.G. Cheng, L. Chen, and L.S. Wang: ISIJ Int., 2018, vol. 58, pp. 1307–15.
A. Larsson and S. Ruppi: Mater. Sci. Eng. A, 2001, vol. 313, pp. 160–69.
J.L. Lu, G.G. Cheng, J.L. Che, L.S. Wang, and G.J. Xiong: Metall. Mater. Int., 2019, vol. 25, pp. 473–86.
S.B. Hosseini, C. Temmel, B. Karlsson, and N.G. Ingesten: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 982–89.
N. Ånmark, A. Karasev, and P.G. Jönsson: Steel Res. Int., 2017, vol. 88, p. 1600111.
C.H. Leung and L.H. Van Vlack: J. Am. Ceram. Soc., 1979, vol. 62, pp. 613–16.
C.H. Leung and L.H. Van Vlack: Metall. Trans. A, 1981, vol. 12, pp. 987–91.
Y. Li, G.G. Cheng, J.L. Lu, and H. Long: Metall. Mater. Int., 2023, vol. 29, pp. 1019–33.
Y. Li, G.G. Cheng, J.L. Lu, and H. Long: Metall. Mater. Trans. B, 2023, vol. 54B, pp. 3343–60.
T. Kano and T. Hanyuda: Denki Seiko (Electric Furnace Steel), 2004, vol. 75, pp. 27–34.
G.Z. Zhang and R.M. Ren: Eng. Fail. Anal., 2019, vol. 105, pp. 1287–95.
L. Krajnc, P. Mrvar, and J. Medved: Mater. Tehnol., 2014, vol. 48, pp. 923–29.
H. Wang, J. Li, C.B. Shi, Y.F. Qi, and Y.X. Dai: ISIJ Int., 2019, vol. 59, pp. 828–38.
M. Lind and L. Holappa: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 359–66.
N. Verma, P.C. Pistorius, R.J. Fruehan, M. Potter, M. Lind, and S.R. Story: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 720–29.
Y. Liu and L.F. Zhang: Metall. Mater. Trans. B, 2018, vol. 49B, pp. 1624–31.
C.S. Liu, D. Kumar, B.A. Webler, and P.C. Pistorius: Metall. Mater. Trans. B, 2020, vol. 51B, pp. 529–42.
Y.J. Kang, F. Li, K. Morita, and D. Sichen: Steel Res. Int., 2006, vol. 77, pp. 785–92.
N. Verma, P.C. Pistorius, R.J. Fruehan, M.S. Potter, H.G. Oltmann, and E.B. Pretorius: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 830–40.
J.H. Shin and J.H. Park: Metall. Mater. Trans. B, 2018, vol. 49B, pp. 311–24.
X.F. Bai, Y.H. Sun, R.M. Chen, Y.M. Zhang, and Y.F. Cai: Int. J. Min. Met. Mater., 2019, vol. 26, pp. 573–87.
W. Zheng, Z.H. Wu, G.Q. Li, Z. Zhang, and C.Y. Zhu: ISIJ Int., 2014, vol. 54, pp. 1755–64.
I. Ohnaka: Trans. Iron Steel Inst. Jpn., 1986, vol. 26, pp. 1045–51.
S.K. Choudhary and A. Ghosh: ISIJ Int., 2009, vol. 49, pp. 1819–27.
M. El-Bealy and B.G. Thomas: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 689–93.
J. Guo, S.S. Cheng, and Z.J. Cheng: ISIJ Int., 2013, vol. 53, pp. 2142–51.
P. Zhao, G.G. Cheng, and S. Shen: Technical Handbook of Secondary Refining and Hot Metal Pretreatment, Metallurgical Industry Press, Beijing, 2004, pp. 25–26.
Z.Y. Deng, Z.H. Liu, M.Y. Zhu, and L.Q. Huo: ISIJ Int., 2021, vol. 61, pp. 1–5.
L.Z. Jiang and K. Cui: Steel Res., 1997, vol. 68, pp. 163–68.
Acknowledgment
The authors express gratitude for the financial support and technical guidance provided by Shanxi Taigang Stainleess Steel Co. Ltd., specifically in relation to the project: Development of key manufacturing technology of high-speed railway wheel and axle steel materials.
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Bao, D., Cheng, G., Zhang, J. et al. Characteristics and Formation Mechanism of Oxide–Sulfide Complex Inclusions in High-Speed Railway Wheel Steel. Metall Mater Trans B (2024). https://doi.org/10.1007/s11663-024-03078-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11663-024-03078-2