Abstract
In this article, the influence of the liquid phase state on the glass-forming ability and solidification processes of the Co65.5Fe6.5Si18B10, Ni64.4Fe4Cr4.9Mn2B16.2C0.5Si8, and Fe50Cr15Mo14C15B6 alloys was studied. It was shown that in conditions of quenching from the melt at ~103 K/s, the largest fraction of the amorphous phase is achieved by cooling from a narrow temperature range near 1573 K (1300 °C) for Co65.5Fe6.5Si18B10, 1503 K (1230 °C) for Ni64.4Fe4Cr4.9Mn2B16.2C0.5Si8, and 1653 K (1380 °C) for Fe50Cr15Mo14C15B6. It was found that at these temperatures, there are anomalies in the viscosity and undercooling polytherms caused by changes in short-range ordering in these melts. Overheating the Co65.5Fe6.5Si18B10, Ni64.4Fe4Cr4.9Mn2B16.2C0.5Si8, and Fe50Cr15Mo14C15B6 melts above these temperatures is accompanied by changing the nature of their crystallization. It was shown that the analysis of the temperature dependences of undercooling and kinematic viscosity can be used to determine the optimum temperatures of the melts quenching to achieve their best bulk amorphization.
Similar content being viewed by others
References
A.J. Drehman, A.L. Greer, and D. Tarnbull: Appl. Phys. Lett., 1982, vol. 41, pp. 716–17.
V.V. Molokanov and V.N. Chebotnikov: Key Eng. Mater., 1990, vols. 40–41, pp. 319–32.
A. Inoue, T. Zhang, and T. Masumoto: Mater. Trans. JIM, 1990, vol. 31, pp. 177–83.
S.J. Poon and S.J. Ponnambalam: J. Mater. Res., 2004, vol. 19, pp. 1320–23.
A. Inoue, Y. Shinohara, and J.S. Gook: Mater. Trans. JIM, 1995, vol. 36, pp. 1427–33.
N.V. Kurakova, P.P. Umnov, V.V. Molokanov, T.A. Sviridova, and Y.K. Kovneristy: Perspectivnye Materially, 2007, vol. 4, pp. 66–72.
K. Amiya and A. Inoue: Rev. Adv. Mater. Sci., 2008, vol. 18, pp. 27–29.
S.J. Pang, T. Zhang, K. Asami, and A. Inoue: Corr. Sci., 2002, vol. 44, pp. 1847–56.
W.H. Wang, C. Dong, and C.H. Shek: Mater. Sci. Eng. R, 2004, vol. 44, pp. 45–89.
J. Latuszkiewicz, T. Kulik, and H. Matyja: J. Mater. Sci., 1980, vol. 15, pp. 2396–98.
F.L.A. Machado, C.S. Martins, and S.M. Rezende: Phys. Rev. B, 1995, vol. 51, pp. 3926–29.
Y.K. Kovneristy, E.K. Osipov, and E.A. Trofimov: Fisiko-Chimicheskie Osnovy Sozdaniya Amorfnych Splavov, Nauka, Moscow, 1983.
A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–306.
K.S. Filippov: Russ. Metall. (Metally), 2010, vol. 5, pp. 379–83.
M.J. Durate, A. Kostka, J.A. Jimenez, P. Choi, J. Klemm, D. Crespo, D. Raabe, and F.U. Renner: Acta Mater., 2014, vol. 71, pp. 20–30.
D.V. Louzguine-Luzgin, A.I. Bazlov, S.V. Ketov, and A. Inoue: Mater. Chem. Phys., 2015, vol. 162, pp. 197–206.
M.K. Miller and P.K. Liaw: Bulk Metallic Glasses: An Overview, Springer, New York, NY, 2007.
K.J. Laws, B. Gun, and M. Ferry: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2377–87.
Z.P. Lu and C.T. Liu: Acta Mater., 2002, vol. 50 (13), pp. 3501–12.
K. Mondal and B.S. Murty: J. Non-Cryst. Solids, 2005, vol. 351, pp. 1366–71.
S. Guo and C.T. Liu: Intermetallics, 2010, vol. 18, pp. 2065–68.
Ana F. Kozmidis-Petrovic: Thermochemica Acta, 2011, vol. 523, pp. 116–23.
H.J. Willy, L.Z. Zhao, and Z.W. Liu: Physica B, 2014, vol. 437, pp. 17–23.
Z. Zhu, H. Zhang, H. Wang, B. Ding, Z.Q. Hu, and H. Huang: J. Mater. Res., 2009, vol. 24 (10), pp. 3108–15.
B.J. Mao, H.F. Zhang, H.M. Fu, A.W. Wang, H. Li, and Z.Q. Hu: Adv. Eng. Mater., 2009, vol. 11 (12), pp. 986–91.
D.V. Lousguine-Luzgin, T. Saito, J. Saida, and A. Inoue: J. Mater. Res., 2008, vol. 23, pp. 515–22.
V.V. Molokanov, M.I. Petrzhik, T.N. Mikhailova, V.P. Manov, and P.S. Popel: Rasplavy, 2000, No. 4, pp. 40–48.
V.V. Molokanov, M.I. Petrzhik, K.S. Filippov, T.A. Sviridova, A. Kastellero, M. Baricco, and L. Batezzati: Materialovedenie, 2002, No. 1, pp. 42–45.
V.V. Molokanov, M.I. Petrzhik, T.N. Mikhailova, T.A. Sviridova, and N.P. Djakonova: J. Non-Cryst. Solids, 1999, vols. 250–252, pp. 560–65.
NV Kurakova, IV Sterkhova, PP Umnov, VI Lad’yanov, VV Molokanov, LV Kamaeva (2007) Russ. Metall. (Metally), vol 2007 No. 6, pp. 89–93.
B.G. Livshiz: Metallografiya, Metallurgiya, Moscow, 1990.
MI Petrzhik, VV Molokanov (2000) Bull. Russ. Acad. Sci. Phys. 2000: 1384–89.
VI Ladyanov, SV Sterkhova, LV Kamaeva, TR Chueva, VV Molokanov (2010) J. Non-Cryst. Sol. 356, pp. 65–71.
Y.G. Shvidkovsky: On Some Problems of Viscosity of Liquid Metals, Gostekhizdat, Moscow, 1955.
AL Beltyukov, SI Ladyanov (2008) Instrum. Exper. Techn., 2: 155–61.
AL Beltyukov, SI Ladyanov, NV Olyanina (2009) Rasplavy 2009: 19–27.
M. Calvo-Dahlborg, P.S. Popel, M.J. Kramer, M. Besser, J.R. Morris, and U. Dahlborg: J. Alloys Compd., 2013, vol. 550, pp. 9–22.
N.A. Mauro, J.C. Bendert, A.J. Vogt, J.M. Gewin, and K.F. Kelton: J. Chem. Phys., 2011, vol. 135, p. 0044502.
P.S. Popel, M. Calvo-Dahlborg, and U. Dahlborg: J. Non-Cryst. Sol., 2007, vol. 353, pp. 32–40.
V.V. Brazhkin, Y. Katayama, M.V. Kondrin, T. Hattori, A.G. Laypin, and H. Saitoh: Phys. Rev. Lett., 2008, vol. 100, p. 1457014.
IV Sterkhova, LV Kamaeva, VI Ladyanov (2013) Rasplavy 2013: 3–12.
AL Beltyukov, SG Menshikova, VI Ladyanov (2015) J. Non-Cryst. Solids 410: 1–6.
D. Herlach, P. Galenko, and D. Holland-Moritz: Metastable Solids from Undercooled Melts. Pergamon Materials Series, Elsevier, Amsterdam, 2007.
I.V. Sterkhova and L.V. Kamaeva: J. Non-Cryst. Sol., 2014, vol. 401, pp. 241–44.
Y.K. Kovneristy: The Bulk-Amortized Metal Alloys, Nauka, Moscow, 1999.
V.A. Volkov, A.A. Chulkina, I.A. Elkin, and E.P. Elsukov: Phys. Met. Metallogr., 2016, vol. 17, pp. 178–87.
Acknowledgments
This work has been carried out thanks to the financial support of the project of the programs of the Ural Branch of Russian Academy of Sciences (Grant No. 15-6-2-40).
Author information
Authors and Affiliations
Corresponding author
Additional information
Manuscript submitted February 8, 2016.
Rights and permissions
About this article
Cite this article
Sterkhova, I.V., Lad’yanov, V.I., Kamaeva, L.V. et al. On the Tendency of the Co-, Ni-, and Fe-Based Melts to the Bulk Amorphization. Metall Mater Trans A 47, 5487–5495 (2016). https://doi.org/10.1007/s11661-016-3693-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-016-3693-2