A structural design of the process of dust capture by means of composite filtering partitions is proposed, the technological regimes for operation of the partitions are determined, and mathematical interpolation models of the dust capture process are developed and experimentally verified. An experimental multi-layer filter with a granular refractory filtering material by means of which step-by-step cleaning of a polydisperse flow may be achieved is developed.
Similar content being viewed by others
References
Yu. V. Krasovitskii, P. B. Baltrenas, and V. I. Entin, Dust Control of Industrial Gases in Refractory Production [in Russian], Tekhnika, Vilnius (1996), 264 pp.
V. A. Goremykin, Yu. V. Krasovitskii, S. Yu. Panov, and A. V. Loginov, Energy Conservation in Dust Collection in the Production of Ceramic Pigments by the “Dry” Method [in Russian], Voronezh State University, Voronezh (2001), 296 pp.
E. V. Romanyuk, R. A. Vazhinskii, and I. A. Chugunova, Development of mathematical models and software for the filtration process, in: Proc. XXI Intern. Sci. Conf. “Mathematical Methods in Engineering and Technologies,” Tambov State Technological University, Tambov (2008), pp. 21 – 23.
E. V. Romanyuk, R. A. Vazhinskii, and I. A. Chugunov, Mathematical models of the process of filtration of a dusty gas flow for a rotating granular layer, in: Proc. XXI Intern. Sci. Conf. “Mathematical Methods in Engineering and Technologies,” Tambov State Technological University, Tambov (2008), pp. 20, 21.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 7, pp. 57 – 61, July, 2014.
Rights and permissions
About this article
Cite this article
Romanyuk, E.V., Krasovitskii, Y.V., Smirnykh, A.A. et al. Composite Filtering Partitions for Use in Cleaning Dusty Gas Flows in the Production of Refractory Materials. Refract Ind Ceram 55, 360–364 (2014). https://doi.org/10.1007/s11148-014-9727-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-014-9727-7