Abstract
Harvesting electrical energy from mechanical vibrations through piezoelectric-based resonant devices is a suitable form of generating alternative electrical sources for several applications, most dedicated to powering small electronic devices. This technique has attracted considerable attention over the past decades, mainly due to piezoelectric materials’ high electrical charge density. However, the amount of harvestable energy is usually small and sensitive to variabilities in design, manufacturing, operation, and environmental conditions. Hence, it is essential to account for predictable and potentially relevant uncertainties during the design of energy harvesting devices. This work presents strategies for the robust design of resonant piezoelectric energy harvesters, considering the presence of uncertainties in design, manufacturing, and mounting conditions, such as the bonding of the piezoelectric materials and the clamping of the resonant device. The work proposes and discusses strategies for finite element modeling, accounting for adhesive bonding of piezoelectric materials and imperfect clamping; harvestable power output mean value and dispersion estimation with Polynomial Chaos Expansion; and robust optimization using multiobjective optimization techniques. Relevant general conclusions concerning harvesting devices include but are not limited to, devices with shorter resonating beams and larger tip masses tend to present performances that are nominally better but also less robust. Additionally, reducing the effective electrical resistance may improve robustness without significantly losing the mean value performance. Also, through an assessment of the most relevant design variables and uncertain parameters, some aspects that should receive special attention when designing, manufacturing, and mounting these devices are discussed, such as the bonding of piezoelectric patches and the clamping of cantilever beams due to their essential effect on the robustness of the device. It is also shown that including well-selected design variables may mitigate the impact of uncertainties and, thus, improve the robustness of the device.
Similar content being viewed by others
Data availability
The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request.
References
Ali, S.F., Friswell, M.I., Adhikari, S.: Piezoelectric energy harvesting with parametric uncertainty. Smart Mater. Struct. 19(10), 105010 (2010)
Aloui, R., Larbi, W., Chouchane, M.: Uncertainty quantification and global sensitivity analysis of piezoelectric energy harvesting using macro fiber composites. Smart Mater. Struct. 29(9), 095014 (2020)
Ang, A.H.S., Tang, W.H.: Probability Concepts in Engineering Planning and Design, vol. 1. Basic Principles, Wiley, New York (1975)
Beyer, H.G., Sendhoff, B.: Robust optimization-a comprehensive survey. Computer Methods in Applied Mechanics and Engineering 196(33–34), 3190–3218 (2007)
Chatterjee, T., Karlicic, D., Adhikari, S., Friswell, M.I.: Parametric amplification in a stochastic nonlinear piezoelectric energy harvester via machine learning. In: Data Science in Engineering, Volume 9, Conference Proceedings of the Society for Experimental Mechanics Series, Springer, Cham, pp 283–291 (2022)
Dash, R.C., Sharma, N., Maiti, D.K., Singh, B.N.: Uncertainty analysis of galloping based piezoelectric energy harvester system using polynomial neural network. J. Intell. Mater. Syst. Struct. 33(16), 2019–2032 (2022)
Deb, K., Pratap, A., Agarwal, S., Meyarivan, T.: A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans. Evol. Comput. 6(2), 182–197 (2022)
dos Santos, K.R., Beck, A.T.: A benchmark study on intelligent sampling techniques in monte carlo simulation. Lat. Am. J. Solids Struct. 12(4), 624–648 (2015)
Dutoit, N.E., Wardle, B.L., Kim, S.G.: Design considerations for mems-scale piezoelectric mechanical vibration energy harvesters. Integr. Ferroelectr. 71(1), 121–160 (2005)
Erturk, A., Inman, D.J.: Piezoelectric Energy Harvesting. John Wiley & Sons (2011)
Erturk, A., Renno, J.M., Inman, D.J.: Modeling of piezoelectric energy harvesting from an L-shaped beam-mass structure with an application to UAVs. J. Intell. Mater. Syst. Struct. 20, 529–544 (2009)
Eshghi, A.T., Lee, S., Sadoughi, M.K., Hu, C., Kim, Y.-C., Seo, J.-H.: Design optimization under uncertainty and speed variability for a piezoelectric energy harvester powering a tire pressure monitoring sensor. Smart Mater. Struct. 26(10), 105037 (2017)
Franco, V.R., Varoto, P.S.: Parameter uncertainties in the design and optimization of cantilever piezoelectric energy harvesters. Mech. Syst. Signal Process. 93, 593–609 (2017)
Godoy, T.C., Trindade, M.A., Deü, J.-F.: Topological optimization of piezoelectric energy harvesting devices for improved electromechanical efficiency and frequency range. In: Proceedings of 10th World Congress on Computational Mechanics (WCCM 2012), São Paulo, pp 4003–4016 (2014)
Godoy, T.C., Trindade, M.A.: Effect of parametric uncertainties on the performance of a piezoelectric energy harvesting device. J. Braz. Soc. Mech. Sci. Eng. 34, 552–560 (2012)
Goldschmidtboeing, F., Woias, P.: Characterization of different beam shapes for piezoelectric energy harvesting. J. Micromec. Microeng. 18, 104013 (2008)
Guyomar, D., Badel, A., Lefeuvre, E., Richard, C.: Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 52(4), 584–595 (2005)
Hu, H., Xue, H., Hu, Y.: A spiral-shaped harvester with an improved harvesting element and an adaptive storage circuit. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 54(6), 1177–1187 (2007)
Kim, J., Lee, T.H., Song, Y., Sung, T.H.: Robust design optimization of fixed-fixed beam piezoelectric energy harvester considering manufacturing uncertainties. Sens. Actuat. A Phys. 260, 236–246 (2017)
Lesieutre, G.A., Ottman, G.K., Hofmann, H.F.: Damping as a result of piezoelectric energy harvesting. J. Sound Vib. 269(3), 991–1001 (2004)
Li, Y., Zhou, S., Litak, G.: Robust design optimization of a nonlinear monostable energy harvester with uncertainties. Meccanica 55(9), 1753–1762 (2020)
Lobato, F.S., Steffen, V., Jr.: Multi-Objective Optimization Problems: Concepts and Self-Adaptive Parameters with Mathematical and Engineering Applications. Springer, Cham, Switzerland (2017)
Lopez, R.H., Beck, A.T.: Reliability-based design optimization strategies based on form: a review. J. Braz. Soc. Mech. Sci. Eng. 34(4), 506–514 (2012)
Maki, L.H., Valencia, M.S., Varoto, P.S.: Dynamic performance and uncertainty analysis of a piezometaelastic structure for vibration control and energy harvesting. In: Special Topics in Structural Dynamics & Experimental Techniques, Volume 5, Conference Proceedings of the Society for Experimental Mechanics Series, Springer, Cham, pp 215–231 (2021)
Marler, R.T., Arora, J.S.: Survey of multi-objective optimization methods for engineering. Struct. Multidiscip. Optim. 26(6), 369–395 (2004)
Martinelli, C., Coraddu, A., Cammarano, A.: Performance-aware design for piezoelectric energy harvesting optimisation via finite element analysis. Int. J. Mech. Mater. Design 19, 121–136 (2023)
Martins, P.H., Trindade, M.A., Varoto, P.S.: Simplified robust and multiobjective optimization of piezoelectric energy harvesters with uncertain parameters. Int. J. Mech. Mater. Design 18(1), 63–85 (2022)
Nguyen, V.-T., Kumar, P., Leong, J.Y.C.: Finite element modelling and simulations of piezoelectric actuators responses with uncertainty quantification. Computation 6(4), 60 (2018)
Norenberg, J.P., Cunha, A., da Silva, S., Varoto, P.S.: Global sensitivity analysis of asymmetric energy harvesters. Nonlinear Dyn. 109(2), 443–458 (2022)
Olsson, A., Sandberg, G., Dahlblom, O.: On latin hypercube sampling for structural reliability analysis. Struct. Saf. 25(1), 47–68 (2003)
Peralta, P., Ruiz, R.O., Meruane, V.: Experimental study of the variations in the electromechanical properties of piezoelectric energy harvesters and their impact on the frequency response function. Mech. Syst. Signal Process. 115, 469–482 (2019)
Poblete, A., Ruiz, R.O., Jia, G.: Hierarchical bayesian approach for model parameter updating in piezoelectric energy harvesters. Mech. Syst. Signal Process. 172, 108942 (2022)
Rafique, S.: Piezoelectric Vibration Energy Harvesting. Springer, Cham, Switzerland (2018)
Rajarathinam, M., Ali, S.F.: Parametric uncertainty and random excitation in energy harvesting dynamic vibration absorber. ASCE-ASME J. Risk Uncert. Eng. Syst. Part B Mech. Eng. 7(1), 010905 (2021)
Rao, S.S.: Engineering Optimization: Theory and Practice. John Wiley & Sons, New Jersey (2009)
Renno, J.M., Daqaq, M.F., Inman, D.J.: On the optimal energy harvesting from a vibration source. J. Sound Vib. 320(1–2), 386–405 (2009)
Santos, H.F.L., Trindade, M.A.: Structural vibration control using extension and shear active-passive piezoelectric networks including sensitivity to electrical uncertainties. J. Braz. Soc. Mech. Sci. Eng. 33(3), 287–301 (2011)
Schuëller, G.I., Jensen, H.A.: Computational methods in optimization considering uncertainties - An overview. Comput. Methods Appl. Mech. Eng. 198(1), 2–13 (2008)
Seong, S., Hu, C., Lee, S.: Design under uncertainty for reliable power generation of piezoelectric energy harvester. J. Intell. Mater. Syst. Struct. 28(17), 2437–2449 (2017)
Sodano, H.A., Inman, D.J., Park, G.: A review of power harvesting from vibration using piezoelectric materials. Shock Vib. Digest 36(3), 197–206 (2004)
Soize, C.: Uncertainty Quantification: An Accelerated Course with Advanced Applications in Computational Engineering. Interdisciplinary Applied Mathematics, Springer, Cham, Switzerland (2017)
Soize, C., Ghanem, R.: Physical systems with random uncertainties: Chaos representations with arbitrary probability measure. SIAM J. Sci. Comput. 26(2), 395–410 (2004)
Stephen, N.: On energy harvesting from ambient vibration. J. Sound Vib. 293(1–2), 409–425 (2006)
Sudret, B., Marelli, S., Wiart, J.: Surrogate models for uncertainty quantification: An overview. In: 2017 11th European Conference on Antennas and Propagation (EUCAP), IEEE, pp 793–797 (2017)
Sudret, B.: Uncertainty Propagation and Sensitivity Analysis in Mechanical Models: Contributions to Structural Reliability and Stochastic Spectral Methods. Université Blaise Pascal, Clermont-Ferrand, France, Habilitation à Diriger des Recherches (2007)
Tikani, R., Torfenezhad, L., Mousavi, M., Ziaei-Rad, S.: Optimization of spiral-shaped piezoelectric energy harvester using taguchi method. J. Vib. Control 24(19), 4484–4491 (2018)
Upadrashta, D., Yang, Y.: Trident-shaped multimodal piezoelectric energy harvester. J. Aerosp. Eng. 31(5), 04018070 (2018)
Wang, X.Q., Liao, Y., Mignolet, M.P.: Uncertainty analysis of piezoelectric vibration energy harvesters using a finite element level-based maximum entropy approach. ASCE-ASME J. Risk Uncert. Eng. Syst. Part B Mech. Eng. 7(1), 010906 (2021)
Yang, K., Zhou, Q.: Robust optimization of a dual-stage bistable nonlinear vibration energy harvester considering parametric uncertainties. Smart Mater. Struct. 28(11), 115018 (2019)
Zang, C., Friswell, M.I., Mottershead, J.: A review of robust optimal design and its application in dynamics. Comput. Struct. 83(4), 315–326 (2005)
Acknowledgements
This research was supported by CNPq, through research grants 574001/2008-5, 309193/2014-1, 134508/2015-7 and 309001/2018-8, which the authors gratefully acknowledge. The first author acknowledges CAPES for a doctoral scholarship.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Martins, P.H., Trindade, M.A. & Varoto, P.S. Improving the robust design of piezoelectric energy harvesters by using polynomial chaos expansion and multiobjective optimization. Int J Mech Mater Des 20, 571–590 (2024). https://doi.org/10.1007/s10999-023-09691-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10999-023-09691-4