Abstract
In this work, the effect of ball milling of Li2CO3 and Fe2O3 reagents on the Li0.5Fe2.5O4 ferrite formation was studied by thermogravimetric and differential scanning calorimetric measurements using non-isothermal heating and cooling modes. In the latter case, the analysis was carried out with a magnetic field applied in order to estimate the Curie temperature of the synthesized ferrite. The mechanical milling of both individual Li2CO3/Fe2O3 reagents and their mixture was performed with an AGO-2C planetary mill using steel vials and balls. Samples with different bulk densities, which were compacted from non-milled and milled powders by pressing with different compaction pressures, were investigated. The results showed that the mechanical milling of powder reagents separately does not cause a significant change in the reactivity of the ferrite system. Only milling of the Li2CO3/Fe2O3 mixture makes it possible not only to increase the reactivity of powders, but also to exclude additional compaction of samples before synthesis.
Similar content being viewed by others
References
Smit J, Wijn HPJ. Ferrites, physical properties of ferrimagnetic oxides in relation to their technical applications. Amsterdam: Eindhoven: Philips Technical Library; 1959. p. 299.
White GO, Patton CE. Magnetic properties of lithium ferrite microwave materials. Magn Magn Mater. 1978;9:299–317.
Baba PD, Argentina GM, Courtney WE, Dionne GF, Temme DH. Fabrication and properties of microwave lithium ferrites. IEEE Trans Magn. 1972;8:83–94.
Thakur P, Sharma P, Mattei JL, Queffelec P, Truhanov AV, Trukhanov SV, Panina LV, Thakur A. Influence of cobalt substitution on structural, optical, electrical and magnetic properties of nanosized lithium ferrite. J Mater Sci Mater Electron. 2018;29:16507–15.
Nazir MA, Ul-Islam M, Ali I, Ali H, Ahmad B, Ramay SM, Nadeem R, Ehsan MF, Ashiq MN. Structural, electrical and dielectric properties of multiferroic-spinel ferrite composites. J Electron Mater. 2016;45:1065–72.
Dipti KP, Juneja JK, Singh S, Raina KK, Prakash C. Improved dielectric and magnetic properties in modified lithium–ferrites. Ceram Int. 2015;41:3293–7.
Verma V, Pandey V, Aloysius RP, Annapoorni S, Kotanala RK. Comparative study of structural and magnetic properties of nanocrystalline Li0.5Fe2.5O4 prepared by various methods. Phys B. 2009;404:2309–14.
Hrešĉak J, Maliĉ B, Cilenšek J, Benĉan A. Solid-state synthesis of undoped and Sr-doped K0.5Na0.5NbO3. J Therm Anal Calorim. 2017;127:129–36.
Teixeira SS, Graça MPF, Costa LC. Dielectric, morphological and structural properties of lithium ferrite powders prepared by solid state method. J Non Cryst Solids. 2012;358:1924–9.
Cook W, Manley M. Raman characterization of α- and β-LiFe5O8 prepared through a solid–state reaction pathway. J Solid State Chem. 2010;183:322–6.
Boldyrev VV. Mechanochemistry and mechanical activation of solids. Russ Chem Rev. 2006;75:177–89.
Surzhikov AP, Pritulov AM, Lysenko EN, Vlasov VA, Vasendina EA, Malyshev AV. Analysis of the phase composition and homogeneity of ferrite lithium-substituted powders by the thermomagnetometry method. J Therm Anal Calorim. 2013;112:739–45.
Edelio B, le Mercier T, Quarton M. Microstructure and physicochemical studies of pure and zinc-substituted lithium ferrites sintered above 1000 °C. J Am Ceram Soc. 1995;78:365–8.
Berbenni V, Bruni G, Milanese C, Girella A, Marini A. Synthesis and characterization of LaFeO3 powders prepared by a mixed mechanical/thermal processing route. J Therm Anal Calorim. 2018;133:413–9.
Mazen SA, Abu-Elsaad NI. Structural, magnetic and electrical properties of the lithium ferrite obtained by ball milling and heat treatment. Appl Nanosci. 2015;5:105–14.
Giri AK. Nanocrystalline materials prepared through crystallization by ball milling. Adv Mater. 1997;9:163–6.
Berbenni V, Milanese C, Bruni G, Marini A, Pallecchi I. Synthesis and magnetic properties of ZnFe2O4 obtained by mechanochemically assisted low-temperature annealing of mixtures of Zn and Fe oxalates. Thermochim Acta. 2006;447:184–9.
Lysenko EN, Surzhikov AP, Nikolaev EV, Vlasov VA. Thermal analysis study of LiFeO2 formation from Li2CO3–Fe2O3 mechanically activated reagents. J Therm Anal Calorim. 2018;134:81–7.
Widatallah HM, Johnson C, Berry FJ. The influence of ball milling and subsequent calcination on the formation of LiFeO2. J Mater Sci. 2002;37:4621–5.
Berbenni V, Marini A, Matteazzi P, Ricceri R, Welham NJ. Solid-state formation of lithium ferrites from mechanically activated Li2CO3–Fe2O3 mixtures. J Eur Ceram Soc. 2003;23:527–36.
Kavanlooee M, Hashemi B, Maleki-Ghaleh H, Kavanlooee J. Effect of annealing on phase evolution, microstructure, and magnetic properties of nanocrystalline ball-milled LiZnTi ferrite. J Electron Mater. 2012;41:3082–6.
Lysenko EN, Surzhikov AP, Vlasov VA, Malyshev AV, Nikolaev EV. Thermal analysis study of solid-phase synthesis of zinc- and titanium-substituted lithium ferrites from mechanically activated reagents. J Therm Anal Calorim. 2015;122:1347–53.
Surzhikov AP, Lysenko EN, Vlasov VA, Nikolaev EV. Microstructure and reactivity of Fe2O3–Li2CO3–ZnO ferrite system ball-milled in a planetary mill. Thermochim Acta. 2018;664:100–7.
Lin DM, Wang HS, Lin ML, Lin MH, Wu YC. TG(M) and DTG(M) techniques and some of their applications on material study. J Therm Anal Calorim. 1999;58:347–53.
Gallagher PK. Thermomagnetometry. J Therm Anal Calorim. 1997;49:33–44.
Sanders JP, Gallagher PK. Kinetics of the oxidation of magnetite using simultaneous TG/DSC. J Therm Anal Calorim. 2003;72:777–89.
Grigorie AC, Muntean C, Stefanescu M. Obtaining of γ-Fe2O3 nanoparticles by thermal decomposition of polyethyleneglycol–iron nitrate mixtures. Thermochim Acta. 2015;621:61–7.
Surzhikov AP, Frangulyan TS, Ghyngazov SA, Lysenko EN. Investigation of structural states and oxidation processes in Li0.5Fe2.5O4−δ using TG analysis. J Therm Anal Calorim. 2012;108:1207–12.
Brown ME, Dollimore D, Gallway AK. Reaction in solid state. Comprehensive chemical kinetics. Amsterdam: Elsevier Scientific Publishing Co.; 1980.
Sharma P, Uniyal P. Investigating thermal and kinetic parameters of lithium titanate formation by solid-state method. J Therm Anal Calorim. 2017;128:875–82.
Friedman HL. Kinetics of thermal degradation of char-forming plastics from thermogravimetry Application to a phenolic plastic. J Polym Sci Part C. 1964;6:183–95.
Opfermann J. Kinetic analysis using multivariate non-linear regression. J Therm Anal Calorim. 2000;60:641–58.
Vyazovkin S, Burnham AK, Criado JM, Pérez-Maqueda LA, Popescu C, Sbirrazzuoli N. ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data. Thermochim Acta. 2011;520:1–19.
Vyazovkin S, Chrissafis K, Di Lorenzo ML, Koga N, Pijolat M, Roduit B, Sbirrazzuoli N, Suñol JJ. ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations. Thermochim Acta. 2014;590:1–23.
Acknowledgements
This work was supported by The Ministry of Science and Higher Education of the Russian Federation in part of the Science program (Project 11.980.2017/4.6). The experiments on equipments and participation in scientific conference were funded from Tomsk Polytechnic University Competitiveness Enhancement Program grant.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Lysenko, E.N., Nikolaev, E.V., Surzhikov, A.P. et al. The influence of reagents ball milling on the lithium ferrite formation. J Therm Anal Calorim 138, 2005–2013 (2019). https://doi.org/10.1007/s10973-019-08334-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-019-08334-1