Abstract
The current study has conducted a wide-ranging characterization, under high-temperature conditions, of a new ternary and quaternary heat transfer fluid, with the addition of Ca(NO3)2 and LiNO3, two of the solar salt additives with a greater potential for being included in these new formulations proposed for the new generation of concentrated solar power (CSP) plants. In this direction, the present research is focused on viscosity and thermal stability since these salts try to increase the work temperature range in CSP plants. Viscosity tests were analyzed each 10 °C from 130 to 300 °C in order to check the variation in this parameter close to their melting points. Isothermal analysis at 450 and 500 °C was also performed through thermal gravimetric (TG) analysis, measuring any resulting loss of mass in the sample at these temperatures. Results were compared with the behavior in binary solar salt. These tests showed a progressive thermal degradation of salts over the time and the maximum temperature for operation in CSP has been corrected regarding the use of ternary and quaternary molten salts.
Similar content being viewed by others
References
Michel W. Heat transfer fluid of potassium nitrate lithium nitrate and 0 to 38% calcium nitrate. US5244592; 1993.
Kniep R. Salt mixtures for storing thermal energy in the form of heat of phase transformation. US5591374; 1997.
Kniep R. Salt mixtures for storing thermal energy in the form of that of phase transformation. US5728316; 1998.
Lotz N. Salt mixtures for storing thermal energy in the form of heat of phase transformation. US6627106; 2003.
Novak S. Alkaline earth or alkali metal salts for antifreeze, deicing, and freeze control. US2004/0164270A1; 2004.
Glaush R. Heat-storage medium II. US2005/0167633A1; 2005.
Redkin A, Korzun I, Yaroslavtseva T, Reznitskikh O, Zaikov Yu. Isobaric heat capacity of molten halide eutectics. J Therm Anal Calorim. 2016;1–6. doi:10.1007/s10973-016-5869-9.
Bradshaw R. Low melting point inorganic nitrate salt heat transfer fluid. United States Patent. US7588694B1; 2009.
Cordaro JG, Bradshaw RW. Multicomponent molten salt mixtures based on nitrate/nitrite anions. Solar Energy Eng. 2011;133:1–4.
Bradshaw RW, Meeker DE. High-temperature stability of ternary nitrate molten salts for solar thermal energy systems. Sol Energy Mater. 1990;21(1):51–60.
Raade JW. Development of molten salt heat transfer fluid with low melting point and high thermal stability. In: SOLARPACES conference; 2010.
Raade JW, Padowitz D, Vaughn J. Low melting point molten salt heat transfer fluid with reduced cost. In: SOLARPACES conference; 2011.
Bauer T, Tamme R. Recent progress in alkali nitrate/nitrite developments for solar thermal power applications. In: Molten salt chemistry and technology conference; 2011.
Wang T, Mantha D, Reddy RG. Thermal stability of the eutectic composition in LiNO3–NaNO3–KNO3 ternary system used for thermal energy storage. Sol Energy Mater Sol Cells. 2010;100:162–8.
Fernandez AG. Thermal characterization of HITEC molten salt for energy storage in solar linear concentrated technology. J Therm Anal Calorim. 2015;122(1):3–9.
Wang J. Thermodynamic modeling and experimental verification of eutectic point in the LiNO3–KNO3–Ca(NO3)2 ternary system. J Therm Anal Calorim. 2015;119(2):1259–66.
Peng W. A dynamic technique for the measurement of thermal conductivity of molten salt based on cylindrical melting model. J Therm Anal Calorim. 2014;115(2):1767–77.
Parrado C. 2050 LCOE improvement using new molten salts for thermal energy storage in CSP plants. Renew Sustain Energy Rev. 2016;57:505–14.
Fernandez AG. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants. Appl Energy. 2014;119:131–40.
Fernandez AG. Thermal characterisation of an innovative quaternary molten nitrate mixture for energy storage in CSP plants. Sol Energy Mater Sol Cells. 2015;132:172–7.
Bradshaw RW. Viscosity of multicomponent molten nitrate salt-liquidus to 200°C. Sandia report; 2010.
Gimenez P, Fereres S. Effect of heating rates and composition on the thermal decomposition of nitrate based molten salts. Energy Procedia. 2015;69:654–62.
Ren N. Preparation and thermal properties of quaternary mixed nitrate with low melting point. Sol Energy Mater Sol Cells. 2014;127:6–13.
Federsel K, Wortmann J, Ladenberger M. High-temperature and corrosion behavior of nitrate nitrite molten salt mixtures regarding their application in concentrating solar power plants. Energy Procedia. 2015;69:618–25.
Acknowledgements
The authors would like to acknowledge the financial support provided by CONICYT/FONDAP 15110019 “Solar Energy Research Center” SERC, Chile, Fondecyt Postdoctoral Grant No. 3140014, FIC-R 30137092 funded by Atacama Government and the Education Ministry of Chile Grant PMI ANT 1201.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fernández, Á.G., Veliz, S., Fuentealba, E. et al. Thermal characterization of solar salts from north of Chile and variations of their properties over time at high temperature. J Therm Anal Calorim 128, 1241–1249 (2017). https://doi.org/10.1007/s10973-016-6037-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-016-6037-y