Skip to main content
Log in

Synthesis and characterization of tungstophosphoric acid-modified mesoporous silica nanoparticles with tuneable diameter and pore size distribution

  • Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications
  • Published:
Journal of Sol-Gel Science and Technology Aims and scope Submit manuscript

Abstract

Mesoporous silica nanoparticles were prepared in aqueous/organic phase using cetyltrimethylammonium bromide and polystyrene as organic templates. The morphology and crystalline phase of the products were characterized by scanning electron microcopy, transmission electron microscopy, X-ray diffraction, small angle X-ray scattering, and N2 adsorption/desorption isotherm analysis. The octane/water ratio influenced the pore size distribution, the morphology and size of the nanospheres obtained. Transmission electron microscopy revealed that mesoporous silica nanoparticles with “blackberry-like structure” (MSN3, MSN4, MSN5, and MSN6 samples) were obtained using octane/water ratios in the range 0.007–0.35. They present small (in the range 5–6 nm) and large (in the range 28–34 nm) mesopores. Large mesopores were mainly generated by polystyrene, and their volume contribution was clearly higher than in the MSN1 and MSN2 samples. The structure and morphology of mesoporous silica nanoparticles solids impregnated with tungstophosphoric acid were similar to those of the mesoporous silica nanospheres used as support. In addition, the characterization of all the solids impregnated with tungstophosphoric acid by Fourier transform infrared and 31P nuclear magnetic resonance indicated the presence of undegraded [PW12O40]3− and [H3−X PW12O40](3−X)− species interacting electrostatically with the ≡Si–OH2 + groups, and by potentiometric titration the solids presented very strong acid sites. In summary, they are good candidates to be used in reactions catalyzed by acids, especially to obtain quinoxaline derivatives.

Graphical Abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Rivera TS, Sosa A, Romanelli GP, Blanco MN, Pizzio LR (2012) Tungstophosphoric acid/zirconia composites prepared by the sol–gel method: an efficient and recyclable green catalyst for the one-pot synthesis of 14-aryl-14H-dibenzo[a,j] xanthenes. Appl Catal A 443–444:207–213

    Article  Google Scholar 

  2. Rengifo-Herrera JA, Frenzel RA, Blanco MN, Pizzio LR (2014) Visible-light-absorbing mesoporous TiO2 modified with tungstosilicicacid as photocatalyst in the photodegradation of 4-chlorophenol. J Photochem Photobiol A 289:22–30

    Article  Google Scholar 

  3. Nandiyanto ABD, Hagura N, Iskandar F, Okuyama K (2010) Design of a highly ordered and uniform porous structure with multisized pores in film and particle forms using a template-driven self-assembly technique. Acta Mater 58:282–289

    Article  Google Scholar 

  4. Sosa A, Rivera TS, Blanco MN, Pizzio LR, Romanelli GP (2013) Tungstophosphoric acid supported on zirconia: a recyclable catalyst for the green synthesis on quinoxaline derivatives under solvent-free conditions. Phosphorus Sulfur Silicon Relat Elem 188:1071–1079

    Article  Google Scholar 

  5. Iskandar F, Lenggoro IW, Kim TO, Nakao N, Shimada M, Okuyama K (2001) Fabrication and characterization of SiO2 particles generated by spray method for standards aerosol. J Chem Eng Jpn 34:1285–1292

    Article  Google Scholar 

  6. Ray S, Bhaumik A, Pramanik M, Butcher RJ, Yildirim SO, Mukhopadhyay C (2014) Binary conjugate Brønsted–Lewis acid supported on mesoporous silica nanoparticles for the domino addition/elimination/addition and addition/elimination/addition/cyclization cascade. Catal Commun 43:173–178

    Article  Google Scholar 

  7. Tu J, Wang T, Shi W, Wu G, Tian X, Wang Y, Ge D, Ren L (2012) Multifunctional ZnPc-loaded mesoporous silica nanoparticles for enhancement of photodynamic therapy efficacy by endolysosomal escape. Biomaterials 33:7903–7914

    Article  Google Scholar 

  8. Mehraban Z, Farzaneh F (2006) MCM-41 as selective separator of chlorophyll-a from b-carotene and chlorophyll-a mixture. Microporous Mesoporous Mater 88:84–90

    Article  Google Scholar 

  9. Hosseini M, Ganjali MR, Aboufazeli F, Faridbod F, Goldooz H, Badiei A, Norouzi P (2013) A selective fluorescent bulk sensor for lutetium based on hexagonal mesoporous structures. Sens Actuators B 184:93–99

    Article  Google Scholar 

  10. Kamyshny A, Magdassi S (2000) Fluorescence immunoassay based on fluorescer microparticles. Colloids Surf B 18:13–17

    Article  Google Scholar 

  11. Yu J, Shi JL, Chen HR, Yan JN, Yan DS (2001) Effect of inorganic salt addition during synthesis on pore structure and hydrothermal stability of mesoporous silica. Microporous Mesoporous Mater 46:153–162

    Article  Google Scholar 

  12. Nandiyanto ABD, Kim SG, Iskandar F, Okuyama K (2009) Synthesis of spherical mesoporous silica nanoparticles with nanometer-size controllable pores and outer diameters. Microporous Mesoporous Mater 120:447–453

    Article  Google Scholar 

  13. Rossi LM, Shi L, Quina FH, Rosenzweig Z (2005) Stöber synthesis of monodispersed luminescent silica nanoparticles for bioanalytical assays. Langmuir 21:4277–4280

    Article  Google Scholar 

  14. Burns A, Vider J, Ow H, Herz E, Penate-Medina O, Baumgart M, Larson SM, Wiesner U, Bradbury M (2009) Fluorescent silica nanoparticles with efficient urinary excretion for nanomedicine. Nano Lett. 9:442–448

    Article  Google Scholar 

  15. Heikkila T, Salonen J, Tuura J, Hamdy MS, Mul G, Kumar N, Salmi T, Yu D, Murzin D, Laitinen L, Kaukonen AM, Hirvonen J, Lehto VP (2007) Mesoporous silica material TUD-1 as a drug delivery system. Int J Pharm 331:133–138

    Article  Google Scholar 

  16. Keggin JF (1934) The structure and formula of 12- phosphotungstic acid. Proc R Soc London Ser A 144:75–100

    Article  Google Scholar 

  17. Rao KM, Gobetto R, Iannibello A, Zecchina A (1989) Solid state NMR and IR studies of phosphomolybdenum and phosphotungsten heteropoly acids supported on SiO2, α-Al2O3, and SiO2–Al2O3. J Catal 119:512–516

    Article  Google Scholar 

  18. Kapustin GI, Brueva TR, Klyachkov AL, Timofeeva MN, Kulikov SM, Kozhevnikov IV (1991) Study of the acidity of heteropolyacids. Kinet Catal 31:1017–1020

    Google Scholar 

  19. Moffat JB, Kasztelan S (1988) The oxidation of methane on heteropolyoxometalates II. Nature and stability of the supported species. J Catal 109:206–211

    Article  Google Scholar 

  20. Kasztelan S, Payen E, Moffat JB (1988) The formation of molybdosilicic acid on Mo/SiO2 catalysts and its relevance to methane oxidation. J Catal 112:320–324

    Article  Google Scholar 

  21. Lefebvre F (1992) 31P MAS NMR study of H3PW12O40 supported on silica: formation of (≡SiOH2 +)(H2PW12O40 ). J Chem Soc Chem Commun (10): 756–757

  22. Legagneux N, Basset JM, Thomas A, Lefebvre F, Goguet A, Sa J, Hardacre Ch (2009) Characterization of silica-supported dodecatungstic heteropolyacids as a function of their dehydroxylation temperature. Dalton Trans (12): 2235–2240

  23. Pizzio LR, Cáceres CV, Blanco MN (1998) Acid catalysts prepared by impregnation of tungstophosphoric acid solutions on different supports. Appl Catal A 167:283–294

    Article  Google Scholar 

  24. Okuhara T, Mizuno N, Misono M (1996) Catalytic chemistry of heteropoly compounds. Adv Catal 41:113–252

    Google Scholar 

  25. Jeannin YP (1998) The nomenclature of polyoxometalates: how to connect a name and a structure. Chem Rev 98:51–76

    Article  Google Scholar 

  26. Kozhevnikov IV (1998) Catalysis by heteropoly acids and multicomponent polyoxometalates in liquid-phase reactions. Chem Rev 98:171–198

    Article  Google Scholar 

  27. Misono M (2001) Unique acid catalysis of heteropoly compounds (heteropolyoxometalates) in the solid state. Chem Commun (13): 1141–1152.

  28. Anastas PT, Warner JC (1998) Green chemistry: theory and practice. Oxford University Press, Oxford

    Google Scholar 

  29. Ajaikumar S, Pandurangan A (2007) Esterification of alkyl acids with alkanols over MCM-41 molecular sieves: influence of hydrophobic surface on condensation reaction. J Mol Catal A 266:1–10

    Article  Google Scholar 

  30. Rocchiccioli-Deltcheff C, Thouvenot R, Franck R (1976) Spectres i.r. et Raman d’hétéropolyanions α-XM12O40 n- de structure de type Keggin (X = BIII, SiIV, GeIV, PV, AsV et M = WVI et MoVI). Spectrochim Acta Part A 32:587–597

    Article  Google Scholar 

  31. Essayem N, Tong YY, Jobic H, Vedrine JC (2000) Characterization of protonic sites in H3PW12O40 and Cs1.9H1.1PW12O40: a solid-state 1H, 2H, 31P MAS-NMR and inelastic neutron scattering study on samples prepared under standard reaction conditions. Appl Catal A 194–195:109–122

    Article  Google Scholar 

  32. Okuhara T, Nishimura T, Watanabe H, Na K, Misono M (1994) 4.8 novel catalysis of cesium salt of heteropoly acid and its characterization by solid-state NMR. Stud Surf Sci Catal 90:419–428

    Article  Google Scholar 

  33. Massart R, Contant R, Fruchart J, Ciabrini J, Fournier M (1977) Phosphorus-31 NMR studies on molybdic and tungstic heteropolyanions. Correlation between structure and chemical shift. Inorg Chem 16:2916–2921

    Article  Google Scholar 

  34. Rengifo-Herrera JA, Blanco MN, Wist J, Florian P, Pizzio LR (2016) TiO2 modified with polyoxotungstates should induce visible-light absorption and high photocatalytic activity through the formation of surface complexes. App Catal A 189:99–109

    Article  Google Scholar 

  35. Rengifo-Herrera JA, Blanco MN, Fidalgo de Cortalezzi MM, Pizzio LR (2016) Visible-light-absorbing Evonik P-25 nanoparticles modified with tungstophosphoric acid and their photocatalytic activity on different wavelengths. Mater Res Bull 83:360–368

    Article  Google Scholar 

  36. Chen CY, Li HX, Davis ME (1993) Studies on mesoporous materials: I. Synthesis and characterization of MCM-41. Microporous Mater 2:17–26

    Article  Google Scholar 

  37. Zhao XS, Lu GQ, Millar GJ (1996) Synthesis and characterization of highly ordered MCM-41 in an alkali-free system and its catalytic activity. Catal Lett 38:33–37

    Article  Google Scholar 

  38. Li T, Senesi AJ, Lee B (2016) Small angle X-ray scattering for nanoparticle research. Chem Rev 116:11128–11180

    Article  Google Scholar 

  39. Pizzio LR, Cáceres CV, Blanco MN (1999) Equilibrium adsorption of 11-tungstophosphate anion on different supports. Appl Surf Sci 151:91–101

    Article  Google Scholar 

Download references

Acknowledgements

The authors acknowledge L. Osiglio, G. Valle, P. Fetsis and M. Theiller for their experimental contribution and CONICET (PIP 628) and UNLP (X638 and X732) for the financial support.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Luis R. Pizzio.

Ethics declarations

Conflict of interest

The authors declare that they have no competing interests.

Electronic supplementary material

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sosa, A.A., Gorsd, M.N., Blanco, M.N. et al. Synthesis and characterization of tungstophosphoric acid-modified mesoporous silica nanoparticles with tuneable diameter and pore size distribution. J Sol-Gel Sci Technol 83, 355–364 (2017). https://doi.org/10.1007/s10971-017-4428-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10971-017-4428-6

Keywords

Navigation