Abstract
In this study, the effect of minor (5 vol.%) addition of Al–10Si–0.2Mg (composition in wt.%) pre-alloyed powder on densification, microstructure and mechanical behaviour of spark plasma-sintered ZrB2-20 vol.% SiC composite has been investigated. The sintered composite records a relative density of 99.83% despite being processed at a relatively low temperature (1700 °C) in argon atmosphere. Interestingly, ZrB2–20SiC–5AlSiMg composite does not undergo any shape distortion though the liquidus temperature of this metallic alloy additive is quite low (~ 592 °C). Extensive phase and microstructure analyses by appropriate techniques indicate that no free or unreacted AlSiMg is detected in the sintered composite. Thermodynamic analysis suggests that AlSiMg serves as a reducing agent for ZrO2 oxide scale and forms respective high-melting oxide phases. Raman analysis confirms that incorporation of 5 vol.% AlSiMg enhances residual compressive stress of SiC grains. Furthermore, the addition of AlSiMg is found to enhance the thermal shock resistance of the composite. In brief, this new AlSiMg additive results in better densification (99.83%) and hence an attractive combination of useful mechanical properties like Vickers microhardness (17.63 ± 0.54 GPa), nano-hardness (18.62 ± 1.23 GPa), indentation fracture toughness (7.21 ± 1.13 MPa \(\sqrt {\text{m}}\)), elastic modulus (432.64 ± 32.90 GPa) and flexural strength (659.25 ± 32.40 MPa) in the AlSiMg-added ZrB2-20SiC composite.
Similar content being viewed by others
References
Fahrenholtz WG, Hilmas GE (2017) Ultra-high temperature ceramics: materials for extreme environments. Scr Mater 129:94–99. https://doi.org/10.1016/j.scriptamat.2016.10.018
Watts J, Hilmas G, Fahrenholtz WG (2011) Mechanical characterization of ZrB2-SiC composites with varying SiC particle sizes. J Am Ceram Soc 94:4410–4418. https://doi.org/10.1111/j.1551-2916.2011.04885.x
Fahrenholtz WG, Hilmas GE, Chamberlain AL et al (2004) Processing and characterization of ZrB2-based ultra-high temperature monolithic and fibrous monolithic ceramics. J Mater Sci 39:5951–5957. https://doi.org/10.1023/B:JMSC.0000041691.41116.bf
Justin JF, Jankowiak A (2011) Ultra High Temperature Ceramics: Densification, Properties and Thermal Stability. AerospaceLab J 3:AL3-08
Zapata-Solvas E, Jayaseelan DD, Lin HT et al (2013) Mechanical properties of ZrB2- and HfB2-based ultra-high temperature ceramics fabricated by spark plasma sintering. J Eur Ceram Soc 33:1373–1386. https://doi.org/10.1016/j.jeurceramsoc.2012.12.009
Ariharan S, Sengupta P, Nisar A et al (2017) Dual-layer oxidation-protective plasma-sprayed SiC-ZrB2/Al2O3-carbon nanotube coating on graphite. J Therm Spray Technol 26:417–431. https://doi.org/10.1007/s11666-016-0508-3
Zapata-Solvas E, Gómez-García D, Domínguez-Rodríguez A, Lee WE (2018) High temperature creep of 20 vol%. SiC-HfB2 UHTCs up to 2000 °C and the effect of La2O3 addition. J Eur Ceram Soc 38:47–56. https://doi.org/10.1016/j.jeurceramsoc.2017.08.028
Guo S (2018) Effects of VC additives on densification and elastic and mechanical properties of hot-pressed ZrB2–SiC composites. J Mater Sci 53:4010–4021. https://doi.org/10.1007/s10853-017-1850-7
Monteverde F, Bellosi A, Scatteia L (2008) Processing and properties of ultra-high temperature ceramics for space applications. Mater Sci Eng A 485:415–421. https://doi.org/10.1016/j.msea.2007.08.054
Sengupta P, Manna I (2019) Advanced high-temperature structural materials for aerospace and power sectors: a critical review. Trans Indian Inst Met 72:2043–2059. https://doi.org/10.1007/s12666-019-01598-z
Monteverde F, Guicciardi S, Bellosi A (2003) Advances in microstructure and mechanical properties of zirconium diboride-based ceramics. Mater Sci Eng A 346:310–319
Zou J, Zhang GJ, Hu CF et al (2012) Strong ZrB 2- SiC: WC ceramics at 1600°C. J Am Ceram Soc 95:874–878. https://doi.org/10.1111/j.1551-2916.2011.05062.x
Snyder A, Quach D, Groza JR et al (2011) Spark Plasma Sintering of ZrB2-SiC-ZrC ultra-high temperature ceramics at 1800°C. Mater Sci Eng A 528:6079–6082. https://doi.org/10.1016/j.msea.2011.04.026
Chamberlain AL, Fahrenholtz WG, Hilmas GE, Ellerby DT (2004) High-strength zirconium diboride-based ceramics. Scr Mater 87:1170–1172. https://doi.org/10.1111/j.1551-2916.2004.01170.x
Sha JJ, Zhang ZF, Di SX et al (2017) Microstructure and mechanical properties of ZrB2-based ceramic composites with nano-sized SiC particles synthesized by in-situ reaction. Mater Sci Eng A 693:145–150. https://doi.org/10.1016/j.msea.2017.03.088
Snyder A, Bo Z, Hodson S et al (2012) The effect of heating rate and composition on the properties of spark plasma sintered zirconium diboride based composites. Mater Sci Eng A 538:98–102. https://doi.org/10.1016/j.msea.2012.01.019
Zhang SC, Hilmas GE, Fahrenholtz WG (2008) Pressureless sintering of ZrB2-SiC ceramics. J Am Ceram Soc 91:26–32. https://doi.org/10.1111/j.1551-2916.2007.02006.x
Silvestroni L, Kleebe HJ, Fahrenholtz WG, Watts J (2017) Super-strong materials for temperatures exceeding 2000 °C. Sci Rep 7:1–8. https://doi.org/10.1038/srep40730
Mallik M, Ray KK, Mitra R (2014) Effect of Si3N4 addition on compressive creep behavior of hot-pressed ZrB2-SiC composites. J Am Ceram Soc 97:2957–2964. https://doi.org/10.1111/jace.13022
Yan X, Jin X, Li P et al (2019) Microstructures and mechanical properties of ZrB2–SiC–Ni ceramic composites prepared by spark plasma sintering. Ceram Int 45:16707–16712. https://doi.org/10.1016/j.ceramint.2019.05.151
Ghasali E, Shahedi Asl M (2018) Microstructural development during spark plasma sintering of ZrB2–SiC–Ti composite. Ceram Int 44:18078–18083. https://doi.org/10.1016/j.ceramint.2018.07.011
Inoue R, Arai Y, Kubota Y et al (2018) Oxidation of ZrB2 and its composites: a review. J Mater Sci 53:14885–14906. https://doi.org/10.1007/s10853-018-2601-0
Lin J, Huang Y, Zhang H et al (2015) Densification and properties of ZrO2 fiber toughed ZrB2-SiC ceramics via spark plasma sintering. Mater Sci Eng A 644:204–209. https://doi.org/10.1016/j.msea.2015.07.073
Mohammadpour B, Ahmadi Z, Shokouhimehr M, Shahedi Asl M (2019) Spark plasma sintering of Al-doped ZrB2–SiC composite. Ceram Int 45:4262–4267. https://doi.org/10.1016/j.ceramint.2018.11.098
Purwar A, Mukherjee R, Ravikumar K et al (2016) Development of ZrB2–SiC–Ti by multi stage spark plasma sintering at 1600°C. J Ceram Soc Japan 124:393–402. https://doi.org/10.2109/jcersj2.15260
Nayebi B, Ahmadi Z, Shahedi Asl M et al (2019) Influence of vanadium content on the characteristics of spark plasma sintered ZrB2–SiC–V composites. J Alloys Compd 805:725–732. https://doi.org/10.1016/j.jallcom.2019.07.117
Opila E, Levine S, Lorincz J (2004) Oxidation of ZrB2- And HfB2-based ultra-high temperature ceramics: effect of Ta additions. J Mater Sci 39:5969–5977. https://doi.org/10.1023/B:JMSC.0000041693.32531.d1
Zhang SC, Hilmas GE, Fahrenholtz WG (2006) Pressureless densification of zirconium diboride with boron carbide additions. J Am Ceram Soc 89:1544–1550. https://doi.org/10.1111/j.1551-2916.2006.00949.x
Golla BR, Mukhopadhyay A, Basu B, Thimmappaa SK (2020) Review on ultra-high temperature boride ceramic. Prog Mater Sci 111:1–73
Sonber JK, Murthy TSRC, Sairam K et al (2018) ZrB2 based novel composite with NiAl as reinforcement phase. Int J Refract Met Hard Mater 70:56–65. https://doi.org/10.1016/j.ijrmhm.2017.09.013
Murray JL, McAlister AJ (1984) The Al-Si (Aluminum-Silicon) system. Bull Alloy Phase Diagrams 5:74–84. https://doi.org/10.1007/BF02868729
Anstis GR, Chantikul P, Lawn BR, Marshall DB (1981) A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements. J Am Ceram Soc 64:533–538. https://doi.org/10.1111/j.1151-2916.1981.tb10320.x
Sciti D, Guicciardi S, Nygren M (2008) Densification and mechanical behavior of HfC and HfB2 fabricated by spark plasma sintering. J Am Ceram Soc 91:1433–1440. https://doi.org/10.1111/j.1551-2916.2007.02248.x
Yue C, Liu W, Zhang L et al (2013) Fracture toughness and toughening mechanisms in a (ZrB2-SiC) composite reinforced with boron nitride nanotubes and boron nitride nanoplatelets. Scr Mater 68:579–582. https://doi.org/10.1016/j.scriptamat.2012.12.005
Shackelford JF, Han Y-H, Kim S, Kwon S-H (2016) CRC Materials Science and Engineering Handbook, 4th edn. CRC Press, Taylor & Francis Group
Hitzler L, Janousch C, Schanz J et al (2016) Nondestructive evaluation of AlSi10Mg prismatic samples generated by Selective Laser Melting: influence of manufacturing conditions. Mater Sci Eng Technol 47:564–581
Callister WD, Rethwisch DG (2013) Callister’s Materials Science and Engineering (Adapted by R. Balasubramaniam), Second. Wiley
Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583. https://doi.org/10.1557/jmr.1992.1564
Schuh CA (2006) Nanoindentation studies of materials. Mater Today 9:32–40. https://doi.org/10.1016/S1369-7021(06)71495-X
Chamberlain AL, Fahrenholtz WG, Hilmas GE, Ellerby DT (2004) High strength ZrB2-based ceramics. J Am Ceram Soc 87:1170–1172
Fahrenholtz WG (2007) Thermodynamic analysis of ZrB2-SiC oxidation: formation of a SiC-depleted region. J Am Ceram Soc 90:143–148. https://doi.org/10.1111/j.1551-2916.2006.01329.x
Silvestroni L, Stricker K, Sciti D, Kleebe HJ (2018) Understanding the oxidation behavior of a ZrB2–MoSi2 composite at ultra-high temperatures. Acta Mater 151:216–228. https://doi.org/10.1016/j.actamat.2018.03.042
Cullity BD (1956) Elements of X-ray diffraction. Addisin-Wesley Publishing Company, INC., Notre Dame, Indiana
Xu Y, Yamazaki M, Villars P (2011) Inorganic materials database for exploring the nature of material. Jpn J Appl Phys 50:11RH02: 1-5
Cheng EJ, Li Y, Sakamoto J et al (2017) Mechanical properties of individual phases of ZrB2-ZrC eutectic composite measured by nanoindentation. J Eur Ceram Soc 37:4223–4227. https://doi.org/10.1016/j.jeurceramsoc.2017.05.031
Shahedi M, Nayebi B, Motallebzadeh A (2019) Nanoindentation and nanostructural characterization of ZrB2–SiC composite doped with graphite nano-flakes. Compos Part B 175:107153:1-8. https://doi.org/10.1016/j.compositesb.2019.107153
Sengupta P, Sahoo SS, Bhattacherjee A et al (2020) Effect of TiC addition on structure and properties of spark plasma sintered ZrB2–SiC–TiC ultrahigh temperature ceramic composite. J Alloys Compd. https://doi.org/10.1016/j.jallcom.2020.156668
Nayebi B, Parvin N, Shahedi Asl M et al (2021) Nanostructural and nanoindentation characterization of ZrB2 ceramics toughened with in-situ synthesized ZrC. Int J Refract Met Hard Mater 94:105391:1-14. https://doi.org/10.1016/j.ijrmhm.2020.105391
Csanádi T, Kovalčíková A, Dusza J et al (2017) Slip activation controlled nanohardness anisotropy of ZrB2 ceramic grains. Acta Mater 140:452–464. https://doi.org/10.1016/j.actamat.2017.08.061
Nisar A, Balani K (2017) Phase and microstructural correlation of spark plasma sintered HfB2-ZrB2 based ultra-high temperature ceramic composites. Coatings 7:110. https://doi.org/10.3390/coatings7080110
Guzmán de Villoria R, Miravete A (2007) Mechanical model to evaluate the effect of the dispersion in nanocomposites. Acta Mater 55:3025–3031. https://doi.org/10.1016/j.actamat.2007.01.007
Kempen K, Thijs L, Van Humbeeck J, Kruth JP (2012) Mechanical properties of AlSi10Mg produced by Selective Laser Melting. Phys Procedia 39:439–446. https://doi.org/10.1016/j.phpro.2012.10.059
Cutler RA (1991) Engineering Properties of Borides in Ceramics and Glasses: Engineered Materials Handbook, vol 4. ASM International, Materials Park, OH
Choren JA, Heinrich SM, Silver-Thorn MB (2013) Young’s modulus and volume porosity relationships for additive manufacturing applications. J Mater Sci 48:5103–5112. https://doi.org/10.1007/s10853-013-7237-5
Hlavac J (1982) Melting temperatures of refractory oxides: part I. Pure Appl Chem 54:681–688
Sengupta P, Bhattacharjee A, Maiti HS (2019) Zirconia: a unique multifunctional ceramic material. Trans Indian Inst Met 72:1981–1998. https://doi.org/10.1007/s12666-019-01742-9
Yuan F, Huang L (2012) α-β transformation and disorder in β-cristobalite silica. Phys Rev B - Condens Matter Mater Phys. https://doi.org/10.1103/PhysRevB.85.134114
Madden GI, VanVlack LH (1967) Transformation of Quartz to Tridymite in the Presence of Binary Silicate Liquids. J Am Ceram Soc 50:414–418
Jain A, Ong SP, Hautier G, et al (2013) The Materials Project: A materials genome approach to accelerating materials innovation
Zimmermann JW, Hilmas GE, Fahrenholtz WG (2008) Thermal shock resistance of ZrB2 and ZrB2-30% SiC. Mater Chem Phys 112:140–145. https://doi.org/10.1016/j.matchemphys.2008.05.048
Zhang XH, Wang Z, Hu P et al (2009) Mechanical properties and thermal shock resistance of ZrB2-SiC ceramic toughened with graphite flake and SiC whiskers. Scr Mater 61:809–812. https://doi.org/10.1016/j.scriptamat.2009.07.001
Zhi W, Qiang Q, Zhanjun W, Guodong S (2011) The thermal shock resistance of the ZrB2-SiC-ZrC ceramic. Mater Des 32:3499–3503. https://doi.org/10.1016/j.matdes.2011.02.056
Wang Z, Hong C, Zhang X et al (2009) Microstructure and thermal shock behavior of ZrB2-SiC-graphite composite. Mater Chem Phys 113:338–341. https://doi.org/10.1016/j.matchemphys.2008.07.095
Watts J, Hilmas G, Fahrenholtz WG et al (2011) Measurement of thermal residual stresses in ZrB2-SiC composites. J Eur Ceram Soc 31:1811–1820. https://doi.org/10.1016/j.jeurceramsoc.2011.03.024
Ghosh D, Subhash G, Orlovskaya N (2008) Measurement of scratch-induced residual stress within SiC grains in ZrB2–SiC composite using micro-Raman spectroscopy. Acta Mater 56:5345–5354. https://doi.org/10.1016/j.actamat.2008.07.031
Jin XC, Sun YL, Hou C et al (2019) Investigation into cooling-rate dependent residual stresses in ZrB2–SiC composites using improved Raman spectroscopy method. Ceram Int 45:22564–22570. https://doi.org/10.1016/j.ceramint.2019.07.285
Stadelmann R, Hughes B, Orlovskaya N et al (2015) 2D Raman mapping and thermal residual stresses in SiC grains of ZrB2-SiC ceramic composites. Ceram Int 41:13630–13637. https://doi.org/10.1016/j.ceramint.2015.07.161
Watts J, Hilmas G, Fahrenholtz WG et al (2010) Stress measurements in ZrB2-SiC composites using Raman spectroscopy and neutron diffraction. J Eur Ceram Soc 30:2165–2171. https://doi.org/10.1016/j.jeurceramsoc.2010.02.014
Fahrenholtz WG, Hilmas GE, Talmy IG, Zaykoski JA (2007) Refractory diborides of zirconium and hafnium. J Am Ceram Soc 90:1347–1364. https://doi.org/10.1111/j.1551-2916.2007.01583.x
Pierson HO (1996) Handbook of Refractory Carbides and Nitrides: Properties, Characteristics, Processing, and Application. Noyes Publications, New Jersey, USA
Gumbleton R, Cuenca JA, Klemencic GM et al (2019) Evaluating the coefficient of thermal expansion of additive manufactured AlSi10Mg using microwave techniques. Addit Manuf 30:100841. https://doi.org/10.1016/j.addma.2019.100841
Shackelford JF, Alexander W (2001) Materials Science and Engineering Handbook, 3rd editio. CRC Press
Liu J, Vohra YK (1994) Raman modes of 6H polytype of silicon carbide to ultrahigh pressures: A comparison with silicon and diamond. Phys Rev Lett 72:4105–4108. https://doi.org/10.1103/PhysRevLett.72.4105
Wang HL, Hon MH (1999) Temperature dependence of ceramics hardness. Ceram Int 25:267–271. https://doi.org/10.1016/S0272-8842(98)00035-2
Guo Q, Luo S, Gan J et al (2015) Effect of ball milled Zr/Al/ZrB2 composite powders on microstructure and toughening of ZrB2-SiC/Zr-Al-C composite ceramics sintered by spark plasma sintering. Mater Sci Eng A 644:96–104. https://doi.org/10.1016/j.msea.2015.07.010
Sun X, Han W, Hu P et al (2010) Microstructure and mechanical properties of ZrB2-Nb composite. Int J Refract Met Hard Mater 28:472–474. https://doi.org/10.1016/j.ijrmhm.2009.12.005
Liu HL, Zhang GJ, Liu JX, Wu H (2015) Synergetic roles of ZrC and SiC in ternary ZrB2-SiC-ZrC ceramics. J Eur Ceram Soc 35:4389–4397. https://doi.org/10.1016/j.jeurceramsoc.2015.08.024
Liu HL, Liu JX, Liu HT, Zhang GJ (2015) Contour maps of mechanical properties in ternary ZrB2SiCZrC ceramic system. Scr Mater 107:140–144. https://doi.org/10.1016/j.scriptamat.2015.06.005
Zou J, Bin MH, D’Angio A, Zhang GJ (2018) Tungsten carbide: a versatile additive to get trace alkaline-earth oxide impurities out of ZrB2 based ceramics. Scr Mater 147:40–44. https://doi.org/10.1016/j.scriptamat.2017.12.033
Yadhukulakrishnan GB, Rahman A, Karumuri S et al (2012) Spark plasma sintering of silicon carbide and multi-walled carbon nanotube reinforced zirconium diboride ceramic composite. Mater Sci Eng A 552:125–133. https://doi.org/10.1016/j.msea.2012.05.020
Wang H, Chen D, Wang CA et al (2009) Preparation and characterization of high-toughness ZrB2/Mo composites by hot-pressing process. Int J Refract Met Hard Mater 27:1024–1026. https://doi.org/10.1016/j.ijrmhm.2009.06.003
Acknowledgements
P. Sengupta would like to acknowledge CSIR-IMMT Bhubaneswar for providing financial support for this work through “OLP-76” project. I. Manna gratefully acknowledges partial financial support from DST sponsored projects ‘JCP’ (SR/S2/JCB-16/2012, Dt. 16.10.17) and ‘DGL’ (DST/TSG/AMT/2015/636/G, Dt. 18-06-2018), MHRD sponsored project ‘LSL_SKI’ (SPARC/2018-19/P723/SL, Dt. 31.05.19) and ISRO funded project ‘ONC’ (IIT/SRIC/MT/ONC/2018-19/057, Dt. 09.07.2018). Assistance from Mr. Nigamananda Ray, CSIR-IMMT Bhubaneswar is acknowledged for conducting thermodynamic analysis using the HSC Chemistry software.
Author information
Authors and Affiliations
Contributions
PS performed conceptualization, experimental design, measurements and manuscript writing. SB was involved in funding acquisition, administrative support and project supervision. IM contributed to conceptualization, experimental design, research supervision and manuscript writing.
Corresponding author
Ethics declarations
Conflict of interest
Authors declare no conflict of interests.
Additional information
Handling Editor: N. Ravishankar.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sengupta, P., Basu, S. & Manna, I. Structure–property correlation in a novel ZrB2–SiC ultrahigh-temperature ceramic composite with Al-alloy sinter additive. J Mater Sci 56, 19029–19046 (2021). https://doi.org/10.1007/s10853-021-06427-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-021-06427-7