Abstract
The effects of xylanase treatment on the fiber surface properties of high yield pulp (chemithermomechanical pulp, alkaline peroxide mechanical pulp, and bleached chemithermomechanical pulp) were studied. Fibers surface composition and surface structure were investigated by X-ray photoelectron spectroscopy and scanning electron microscopy, respectively. The former demonstrated an increase in the atomic oxygen to carbon ratio, a decrease in the lignin content, and variation in the C1s on the fiber surface of enzymatically treated samples. An enrichment of a large proportion of open and fibrillated fibers was visualized by the latter, resulting in an improvement in the pulp’s physical strength-related properties. Surface modification using enzymatic treatments allow for improved fiber surface properties to obtain new products through sustainable technologies.
Similar content being viewed by others
References
Adewopo JB, Patterson DW (2011) Effects of heat treatment on the mechanical properties of loblolly pine, sweetgum, and red oak. For Prod J 61(7):526–535
Beg Q, Kapoor M, Mahajan L, Hoondal GS (2001) Microbial xylanases and their industrial applications: a review. Appl Microbiol Biotechnol 56(3):326–338
Börås L, Gatenholm P (1999) Surface composition and morphology of CTMP fibers. Holzforschung 53(2):188–194
Chen N, Lin Q, Rao J, Zeng Q, Luo X (2012) Environmentally friendly soy-based bio-adhesive: preparation, characterization, and its application to plywood. Bioresources 7(3):4273–4283
Cisneros HA, Williams GJ, Hatton JV (1995) Fibre surface characteristics of hardwood refiner pulps. J Pulp Pap Sci 21(5):178–184
Clark TA, Steward D, Bruce ME, Mcdonald AG, Singh AP, Senior DJ (1991) Improved bleachability of radiata pine kraft pulps following treatment with hemicellulolytic enzymes. Appita 44(6):389–393
Comlekcioglu U, Tutus A, Cicekler M, Gunes M, Aygan A (2014) Application of recombinant xylanase from Orpinomyces sp in elemental chlorinefree bleaching of kraft pulps. Rom Biotechnol Lett 19(1):8941–8950
Committee T (2000) TAPPI test methods. Tappi, Atlanta
Danilatos GD (1993) Introduction to the ESEM instrument. Microsc Res Technol 25(5–6):354–361
Dorris GM, Gray DG (1978) The surface analysis of paper and wood fibers by Esca-electron spectroscopy for chemical analysis-I. Applications to cellulose and lignin. Cell Chem Technol 12:9–23
Hoang PH (2014) Application of enzyme for improvement of acacia APMP pulping and refining of mixed pulp for printing papermaking in Vietnam. Appl Biochem Biotechnol 172(3):1565–1573
Hu G, Fu S, Liu H, Lucia LA (2015) Adsorption of cationized eucalyptus heteropolysaccharides onto chemical and mechanical pulp fibers. Carbohydr Polym 123:324–330
Inari GN, Pétrissans M, Dumarcay S, Lambert J, Ehrhardt JJ, Šernek M, Gerardin P (2011) Limitation of XPS for analysis of wood species containing high amounts of lipophilic extractives. Wood Sci Technol 45(2):369–382
Johansson LS, Campbell JM (1999) Evaluation of surface lignin on cellulose fibers with XPS. Appl Surf Sci 144(98):92–95
Koljonen K, Österberg M, Johansson L, Stenius P (2003) Surface chemistry and morphology of different mechanical pulps determined by ESCA and AFM. Colloid Surf A 228(1):143–158
Lei X, Zhao Y, Li K, Pelletier A (2012) Improved surface properties of CTMP fibers with enzymatic pretreatment of wood chips prior to refining. Cellulose 19(6):2205–2215
Li K, Reeve DW (2002) The origins of kraft pulp fibre surface lignin. J Pulp Pap Sci 28(11):369–373
Li K, Reeve DW (2005) Sample contamination in analysis of wood pulp fibers with X-ray photoelectron spectroscopy. J Wood Chem Technol 24(3):183–200
Liu Y, Tao Y, Lv X, Zhang Y, Di M (2010) Study on the surface properties of wood/polyethylene composites treated under plasma. Appl Surf Sci 257(3):1112–1118
Mader A, Kondor A, Schmid T, Einsiedel R, Müssig J (2016) Surface properties and fibre-matrix adhesion of man-made cellulose epoxy composites—influence on impact properties. Compos Sci Technol 123:163–170
Neto CP, Silvestre A, Evtuguin DV, Freire C, Pinto P, Santiago AS, Fardim P, Holmbom B (2004) Bulk and surface composition of ECF bleached hardwood kraft pulp fibres. Nord Pulp Pap Res J 19(4):513–520
Ni Y (2005) A review of recent technological advances in the brightening of high-yield pulps. Can J Chem Eng 83(4):610–617
Paice MG, Gurnagul N, Page DH, Jurasek L (1992) Mechanism of hemicellulose-directed prebleaching of kraft pulps. Enzyme Microb Technol 14(4):272–276
Panthi S, Choi YS, Choi YH, Kim M, Yoo JC (2016) Biochemical and thermodynamic characterization of a novel, low molecular weight xylanase from Bacillus Methylotrophicus CSB40 isolated from traditional Korean food. Appl Biochem Biotechnol 179(1):126–142
Patel RN, Grabski AC, Jeffries TW (1993) Chromophore release from kraft pulp by purified Streptomyces roseiscleroticus xylanases. Appl Microbiol Biotechnol 39(3):405–412
Reme PA, Helle T, Johnsen PO (1998) Fibre characteristics of some mechanical pulp grades. Nord Pulp Pap Res J 13(4):263
Saleem M, Aslam F, Akhtar MS, Tariq M, Rajoka MI (2012) Characterization of a thermostable and alkaline xylanase from Bacillus sp. and its bleaching impact on wheat straw pulp. World J Microb Biotechnol 28(2):513–522
Ström G, Carlsson G (1992) Wettability of kraft pulps-effect of surface composition and oxygen plasma treatment. J Adhes Sci Technol 6(6):745–761
Tian C, Zheng L, Miao Q, Cao C, Ni Y (2014) Improving the reactivity of kraft-based dissolving pulp for viscose rayon production by mechanical treatments. Cellulose 21(5):3647–3654
Wang S, Jämsä S, Mahlberg R, Ihalainen P, Nikkola J, Mannila J, Ritschkoff AC, Peltonen J (2014) Treatments of paper surfaces with sol–gel coatings for laminated plywood. Appl Surf Sci 288:295–303
Wong KK, Saddler JN (1992) Trichoderma xylanases, their properties and application. Crit Rev Biotechnol 12(5–6):413–435
Acknowledgments
The authors acknowledge the Natural Science Foundation of China (No. 31370585), the Science and Technology Planning Project of Guangdong Province, China (No. 2015A020215007), and the Fundamental Research Funds for the Central Universities (Nos. 2015ZM054 and 2015ZZ048) for sponsoring the research.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, Yy., Liu, Mr., Li, Hl. et al. Characteristics of high yield pulp fibers by xylanase treatment. Cellulose 23, 3281–3289 (2016). https://doi.org/10.1007/s10570-016-1032-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-016-1032-9