Abstract
Methylorubrum extorquens is an important model methylotroph and has enormous potential for the development of C1-based microbial cell factories. During strain construction, regulated promoters with a low background expression level are important genetic tools for expression of potentially toxic genes. Here we present an accordingly optimised promoter, which can be used for that purpose. During construction and testing of terpene production strains harbouring a recombinant mevalonate pathway, strong growth defects were observed which made strain development impossible. After isolation and characterisation of suppressor mutants, we discovered a variant of the cumate-inducible promoter PQ2148 used in this approach. Deletion of 28 nucleotides resulted in an extremely low background expression level, but also reduced the maximal expression strength to about 30% of the original promoter. This tightly repressed promoter version is a powerful module for controlled expression of potentially toxic genes in M. extorquens.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Methylotrophs are organisms which use reduced one carbon compounds as sole carbon and energy source. Methylorubrum extorquens AM1 serves as model organism for bacterial methylotrophy research since its isolation in 1961 (Peel and Quayle 1961). Furthermore, the organism has gained importance in recent years as a platform organism for C1-biotechnology. Hence, several production routes for bulk and fine chemicals as 1-butanol, 3-hydroxypropionic acid, dicarboxylic acids, mevalonate and α-humulene have been described (Sonntag et al. 2014, 2015a, b; Hu and Lidstrom 2014; Liang et al. 2017; Yang et al. 2017; Schada von Borzyskowski et al. 2018; Lim et al. 2019). Nevertheless, the full potential of M. extorquens AM1 as a production platform has not yet been reached (Ochsner et al. 2015). The implementation of new synthetic production routes requires a broad set of molecular tools for DNA introduction, genome manipulation and recombinant gene expression. For many years, only PmxaF-based expression vectors were used for gene overexpression in M. extorquens AM1 (Marx and Lidstrom 2001). The mxaF gene, encoding for the large subunit of the methanol dehydrogenase in M. extorquens, is highly expressed during methylotrophic growth (Liu et al. 2006) and PmxaF is among the strongest known native promoters of M. extorquens (Choi et al. 2006). Besides PmxaF, a variety of synthetic constitutive promoters with different expression strengths have been described (Schada von Borzyskowski et al. 2015). Yet, constitutive expression is not always useful during construction of highly efficient production strains. Inducible and adjustable expression can be necessary to separate growth and production phases or to express toxic genetic constructs. Different inducible promoters with the possibility of tuning the expression level have been described for M. extorquens (Choi et al. 2006; Chubiz et al. 2013; Kaczmarczyk et al. 2013; Carrillo et al. 2019; Sathesh-Prabu et al. 2021). In two of the developments, expression levels comparable to or even exceeding those of PmxaF were achieved (Carrillo et al. 2019; Sathesh-Prabu et al. 2021). However, the development of promoters which are suitable for fine-tuned low expression of toxic genes in M. extorquens AM1, has not been the subject of studies so far.
In this study, we report on the use of inducible promoters for expression of a gene cluster for cis-abienol production in M. extorquens AM1. The organism has been described to be especially suited for production of terpenoids via the mevalonic acid (MVA) pathway due to the occurrence of the MVA pathway starting intermediate acetoacetyl-CoA in its primary metabolism (Sonntag et al. 2015a). While in this publication the sesquiterpene α-humulene was the target product, we now aimed at construction of a strain able to synthesise the diterpene alcohol cis-abienol. This compound serves as a valuable bioproduct material for the fragrance industry. For production of cis-abienol with M. extorquens AM1 we planned on using PQ5 derivative PQ2148 (Kaczmarczyk et al. 2013). The original cumate-inducible promoter system PQ5 was designed for expression in Sphingomonas species (Kaczmarczyk et al. 2013). For this synthetic promoter, Psyn2 was combined with control elements of the Pseudomonas putida F1 cym/cmt system to make it responsive to cumate induction (Eaton 1997; Kaczmarczyk et al. 2013). In the original study, Psyn2 -32 and -10 regions were exchanged with M. extorquens specific sequences. This resulted in PQ2148, that can be used to drive gene expression in M. extorquens. Surprisingly, in our study PQ2148 was not tight enough for using it with the cis-abienol synthesis gene cluster and caused strong growth inhibition. Hence, we present PQ2148-derivative Ps6, which is tightly repressible and whose activity is tuneable with different inducer concentrations. With this optimised promoter, we expand the genetic toolkit of M. extorquens to promote its use as platform organism for C1 biotechnology.
Results and discussion
Terpene production with PQ2148-based plasmids
Inducible expression of toxic genes or pathways with toxic intermediates can be essential during the implementation of novel production routes. For instance, previous studies have shown that it is beneficial for terpene production in M. extorquens AM1 to increase IPP supply as a metabolic substrate of FPP synthases (Sonntag et al. 2015a). Thereby, constitutive expression of the heterologous MVA pathway had a lethal effect on the cells, and no transformants carrying the corresponding expression plasmid could be isolated in the named study. To overcome this problem, the authors chose the cumate-inducible expression plasmid pQ2148. Although transformation of the construct was successful and product concentrations of the product α-humulene could be increased, the cells still showed a growth defect in the absence of the inducer, which indicates a certain leakiness of the PQ2148 promoter (Sonntag et al. 2015a).
When we attempted to replicate the experiments of the corresponding study (Sonntag et al. 2015a), the amount of α-humulene production surprisingly varied strongly between the different pFS62b-transformants of the AM1 strain (Fig. 1). These strong differences in productivity might be the result of toxic effects of the terpene production gene cluster, which probably caused a strong selection pressure against high carbon flux through the pathway. A non-induced control strain produced 8.7% of the α-humulene titer from the original study (Sonntag et al. 2015a). Another clone showed the same level of production even when induced, probably due to early occurrence of a suppressor mutation. These results indicated that the MVA pathway-encoding plasmid pFS62b exerts some toxic effect on the host strain in the absence of the inducing agent cumate.
These effects became even more evident during an approach to further broaden the terpene product spectrum of M. extorquens AM1. The introduction of a cis-abienol synthesis operon on plasmid ppjo16 resulted in a very poor transformation efficiency. After transformation of 400 ng of plasmid DNA and six days of incubation, only two colonies appeared on agar plates with medium containing tetracycline, but no cumate, whereas a control transformation of vector pQ2148F yielded over 3000 colonies. This low transformation efficiency rate and the fact that some small colonies appeared on the transformation plates after eight days of incubation led us to the conclusion that the promoter PQ2148F does not tightly regulate the expression of the obviously toxic cis-abienol synthesis operon. Streaking out some of the small colonies on a new agar plate resulted in the formation of faster growing strains, which probably contained suppressor mutations and were isolated. The corresponding strains are hereafter referred to as "suppressor mutants".
Investigation of suppressor mutants
In order to gain knowledge about the underlying cause for growth inhibition mediated by the plasmid ppjo16, the suppressor mutants were thoroughly analysed. First, their sensitivity towards fosmidomycin was tested. Fosmidomycin inhibits the DXP pathway (Shigi 1989; Jomaa et al. 1999), which represents the native terpenoid biosynthesis route of M. extorquens. Since IPP and DMAPP supply is crucial for growth of the cells, the suppressor clones were tested for a functional, alternative mevalonate pathway with this assay (Fig. 2A). To further characterise the suppressor mutants, terpene production yields were determined (Fig. 2A), the respective plasmids were isolated and the genes encoding the cis-abienol production pathway were sequenced (Fig. 2B). As positive control, an M. extorquens AM1 strain harbouring the α-humulene synthesis plasmid pFS62b was used.
The two suppressor mutants unable to grow on fosmidomycin and to produce cis-abienol (AM1_ppjo16s1 and AM1_ppjo16s4) were probably able to overcome the plasmid-imposed toxicity by deletion of MVA pathway genes. Additionally, the cis-abienol synthase gene AbCAS and GGPP synthase gene ERG20F96C were partly or completely deleted on the respective plasmids, leading to the inability to produce cis-abienol. Only three of the suppressor strains tested were resistant to fosmidomycin, namely AM1_ppjo16L1, AM1_ppjo16s3 and AM1_ppjo16s6. In AM1_ppjo16L1 AbCAS and ERG20F96C were partly deleted and no cis-abienol production was detectable for the respective strain. As the deletion can also affect mRNA stability or translation efficiency of the MVA pathway genes, reduction of MVA pathway flux might be the suppression mechanism also in this mutant. This assumption is supported by the fact that cis-abienol itself was found to be not toxic for M. extorquens AM1 (Figure S1, Online Resource 1). No plasmid could be isolated from strain AM1_ppjo16s3, so we assume that genomic integration of the entire gene cluster or at least of genes indispensable for cis-abienol production has occurred. AM1_ppjo16s6 in fact was able to produce 5.3 mg cis-abienol l−1 and was resistant to fosmidomycin. The isolated plasmid showed no mutations in any of the genes necessary for cis-abienol production or the MVA pathway-encoding genes.
The original cumate-dependent promoter system PQ2148 was already used for inducible gene expression in M. extorquens (Kaczmarczyk et al. 2013). In our experiments, expression of the genes encoding the toxic cis-abienol production pathway was not tightly repressed by CymR, which is supposed to bind to CuO operator sites as long as no cumate is present. AM1_ppjo16s6 overcame the toxicity of the plasmid while harbouring an intact synthesis operon (Fig. 2B). Sequencing the upstream region of the gene cluster on ppjo16s6 revealed a deletion of 28 nucleotides in the promoter region (Fig. 3). This promoter variant (henceforth Ps6) lacks parts of the Pbla-mut1T -35 and the adjacent CuO operator sequence. This modification probably leads to higher expression of the CymR repressor protein or enhanced binding efficiency to the repressor site.
Characterisation of Ps6
To further characterise Ps6, we conducted reporter assays with different cumate concentrations. Therefore, we designed mCherry-reporter constructs pQ2148_mCherry and pQ2148-s6_mCherry and monitored fluorescence of respective M. extorquens AM1 transformants in a microbioreactor system. The cumate concentrations we used (up to 150 µM) did not affect cell growth (Fig. 4). A high mCherry signal was already detectable at the begin of cultivation of AM1_pQ2148_mCherry and showed a linear increase in strength even before induction with cumate (Fig. 4A). This confirms that PQ2148 in its original confirmation is not as tight as assumed. Induction at 3 µM cumate did not affect fluorescence. Addition of higher inducer levels resulted in induction, although a tuneability with different cumate concentrations was not distinctly evident. In comparison, when investigating AM1_pQ2148-s6_mCherry, the initial fluorescence signal was fivefold lower (Fig. 4B). The signal remained nearly stable until induction (at t0: 0.38 ± 0.01; at ti-1: 0.45 ± 0.1) and did quickly respond to cumate addition, while tunability was evident. With addition of the highest tested cumate concentration of 150 µM a 40-fold enhanced signal (determined at tmax = 33.2 h) compared to the non-induced control could be reached. Moreover, the maximum mCherry fluorescence signal at this high inducer concentration was 54-fold higher (tmax = 33.2 h) than immediately before induction (ti-1 = 18.3 h).
PQ2148 was shown to be tight and inducible in M. extorquens AM1 in previous studies (Kaczmarczyk et al. 2013). Our reporter plasmids carried a different reporter gene, a different selection marker (Tcr instead of Kmr) and a different linker sequence between promoter and reporter gene due to distinct genesis of the constructs. To validate our observations made with PQ2148 and to assure that the sequence differences in the inter-promoter-gene region did not change promoter characteristics, we constructed plasmids pQ2148L_mCherry and pQ2148L-s6_mCherry with the according linker sequence (Fig. 5A). The monitored mCherry fluorescence signals for the new constructs were nearly identical to the previous results. Whereas PQ2148 on pQ2148L_mCherry was leaky and promoted mCherry expression even before induction (Fig. 5B), Ps6 on pQ2148L-s6_mCherry repressed expression without inducer and exhibited quick response to cumate addition with induction at various levels (Fig. 5C).
In either version of the reporter gene constructs, the overall mCherry expression driven by the Ps6 promoter was considerably lower than with PQ2148 (~ 30% of the maximal pQ2148 expression strength). Testing Ps6 in α-humulene synthesis plasmid led to similar results. Production experiments with the according construct pFS62b-s6 only yielded 28 ± 4 mg α-humulene l−1 (three replicates), which is a lower titer compared to experiments with the original plasmid pFS62b. Nevertheless, in the case of cis-abienol production, this property of Ps6 was highly beneficial. The avoidance of pathway-encoding operon expression under non-induced conditions only enabled plasmid transformation and strain cultivation without strong selection for terpene synthesis pathway destruction. Ps6 furthermore allowed production of cis-abienol and will facilitate metabolic engineering approaches towards a more balanced pathway.
Conclusion
Here, we provide Ps6, a modified version of the PQ2148 promoter (Kaczmarczyk et al. 2013) for cumate inducible gene expression in M. extorquens. While Ps6 is less efficient with regard to strong overexpression, it is a powerful tool for controlled expression of potentially toxic genes or pathways. We successfully demonstrated its application for the development of a cis-abienol production strain. Confirmatively, reporter experiments detected essentially no background expression for uninduced constructs. This property makes Ps6 a valuable addition to the emerging genetic toolbox for M. extorquens.
Material and methods
Bacterial strains and growth conditions
Escherichia coli DH5α (Gibco-BRL, Rockville, USA) was used for cloning and amplification of all plasmids. E. coli cultures were grown in LB medium (Bertani 1951) at 37 °C. Liquid minimal medium for M. extorquens AM1 (Peel and Quayle 1961) was prepared using 123 mM methanol as previously described (Peyraud et al. 2009) with a CoCl2 concentration of 12.6 µM (Kiefer et al. 2009; Sonntag et al. 2014). For preparation of solid growth medium, 1.5% [w/v] agar–agar was added. If necessary, tetracycline was added at a concentration of 10 µg tetracycline hydrochloride ml−1 for both E. coli and M. extorquens AM1 cultures. For cultivation of M. extorquens AM1, precultures were grown in test tubes for 48 h at 30 °C and main cultures were subsequently inoculated to an OD600 of 0.1. If not stated differently, gene expression was induced after 16 h of cultivation by cumate addition. Cumate (4-isopropylbenzoic acid) was prepared as a 100 mM stock solution in ethanol and diluted prior to use. Fosmidomycin sensitivity of suppressor mutants was tested by streaking out cells on solid medium containing 20 mg fosmidomycin l−1. All chemicals used for media preparation were purchased from Carl Roth (Karlsruhe, Germany) or Merck KGaA (Darmstadt, Germany).
Plasmid construction
All standard cloning procedures were performed in E. coli DH5α. Plasmids (see Table S1, Online Resource 1) were constructed as follows. For ppjo16, cis-abienol synthase gene AbCAS (Zerbe et al. 2012) and GGPP synthase gene ERG20F96C (Ignea et al. 2015) were codon optimised and a new RBS sequence was calculated (Salis 2011) and inserted. For the detailed sequence information of genes see international patent WO 2016/142503 (Schrader et al. 2016). Plasmids ppjo16s1, ppjo16s3, ppjo16s4, ppjo16s6 and ppjo16L1 were isolated from AM1_ppjo16 suppressor mutants. To construct pFS62b-s6, a fragment containing Ps6 was subcloned from ppjo16s6 into pFS62b using NheI and SpeI restriction sites. Reporter plasmids were constructed via Gibson assembly (Gibson et al. 2009): Assembly of PCR product of primers EGe119 and EGe121 on template pTE105_mCherry (Schada von Borzyskowski et al. 2015) and SpeI/EcoRI linearised backbone pQ2148F or ppjo16s6 yielded pQ2148_mCherry or pQ2148-s6_mCherry, respectively. pQ2148L_mCherry was constructed by assembly of PCR products of primers LPoe1 and LPoe2 on template pQ2148 and product of primers LPoe3 and LPoe4 on template pQ2148_mCherry. Accordingly, assembly of PCR products of primers LPoe6 and LPoe7 on template pQ2148_mCherry and product of primers LPoe5 and LPoe8 on template pQ2148_mCherry yielded pQ2148L-s6_mCherry. The sequences of final genetic constructs were confirmed by Sanger sequencing at Eurofins Scientific (Luxembourg, Luxembourg). All used oligonucleotides were purchased from Merck KGaA (Darmstadt, Germany) and are listed in Table S2 (Online Resource 1). PCRs were performed with Q5 Polymerase from NEB (Frankfurt, Germany) according to the manufacturer’s instructions. Subsequently, PCR products were purified with the DNA Clean & Concentrator Kit from Zymo Research Europe (Freiburg, Germany). Transformation of final constructs in M. extorquens AM1 was performed as previously described (Toyama et al. 1998).
Terpene production and analysis
Terpenes produced by M. extorquens AM1 strains harbouring respective terpene synthesis plasmids, were extracted in situ with a dodecane overlay as described before (Sonntag et al. 2015a). The analysis of the extracted terpenes was performed on a GC–MS (GC17A with Q5050 mass spectrometer, Shimadzu, Kyoto, Japan) equipped with an Equity 5 column (Supelco, 30 m × 0.25 mm × 0.25 µM) as previously described (Sonntag et al. 2015a). For cis-abienol analysis the split ratio was reduced from 1:8 to 1:1 and the overall measuring time was prolonged to 17.5 min. Retention time for cis-abienol was 14.1 min. The cis-abienol analytical standard was purchased from Toronto Research Chemicals (Toronto, CA).
Fluorescence assisted promoter studies
For high-resolution measurements of growth curves and mCherry fluorescence signals, cells were cultivated in a BioLector® microbioreactor system (m2p-labs GmbH, Baesweiler, Germany). First, precultures of M. extorquens AM1 containing respective reporter plasmids were grown in MeOH minimal medium with 10 µg tetracycline-hydrochloride ml−1 for 48 h at 30 °C. Subsequently, 1 ml of fresh medium was inoculated to an OD of 0.1 in 48-well Flowerplates® in the microbioreactor and incubated at 30 °C, 1000 rpm and 85% humidity. The growth was monitored via scattered light signal intensity at 700 nm. The fluorescence signal of mCherry was measured at 580/610 nm [ex/em]. Gene expression was induced by adding 20 µL of cumate stock solutions (solved in ethanol, the final ethanol concentration in the medium was 51 mM).
Data availability
All data generated or analysed during this study are included in this published article and its supplementary information file.
References
Bertani G (1951) Studies on lysogenesis I. The mode of phage liberation by lysogenic Escherichia coli. J Bacteriol 62:293–300. https://doi.org/10.1128/jb.62.3.293-300.1951
Carrillo M, Wagner M, Petit F et al (2019) Design and control of extrachromosomal elements in Methylorubrum extorquens AM1. ACS Synth Biol 8:2451–2456. https://doi.org/10.1021/acssynbio.9b00220
Choi YJ, Morel L, Bourque D et al (2006) Bestowing inducibility on the cloned methanol dehydrogenase promoter (PmxaF) of Methylobacterium extorquens by applying regulatory elements of Pseudomonas putida F1. Appl Environ Microbiol 72:7723–7729. https://doi.org/10.1128/AEM.02002-06
Chubiz LM, Purswani J, Carroll SM, Marx CJ (2013) A novel pair of inducible expression vectors for use in Methylobacterium extorquens. BMC Res Notes 6:1–8. https://doi.org/10.1186/1756-0500-6-183
Eaton RW (1997) p-Cymene catabolic pathway in Pseudomonas putida F1: cloning and characterization of DNA encoding conversion of p-cymene to p-cumate. J Bacteriol 179:3171–3180. https://doi.org/10.1128/jb.179.10.3171-3180.1997
Gibson DG, Young L, Chuang RY et al (2009) Enzymatic assembly of DNA molecules up to several hundred kilobases. Nat Methods 6:343–345. https://doi.org/10.1038/NMETH.1318
Hu B, Lidstrom ME (2014) Metabolic engineering of Methylobacterium extorquens AM1 for 1-butanol production. Biotechnol Biofuels 7:156. https://doi.org/10.1186/s13068-014-0156-0
Ignea C, Trikka FA, Nikolaidis AK et al (2015) Efficient diterpene production in yeast by engineering Erg20p into a geranylgeranyl diphosphate synthase. Metab Eng 27:65–75. https://doi.org/10.1016/j.ymben.2014.10.008
Jomaa H, Wiesner J, Sanderbrand S et al (1999) Inhibitors of the nonmevalonate pathway of isoprenoid biosynthesis as antimalarial drugs. Science 285:1573–1576. https://doi.org/10.1126/science.285.5433.1573
Kaczmarczyk A, Vorholt JA, Francez-Charlot A (2013) Cumate-inducible gene expression system for sphingomonads and other Alphaproteobacteria. Appl Environ Microbiol 79:6795–6802. https://doi.org/10.1128/AEM.02296-13
Kiefer P, Buchhaupt M, Christen P et al (2009) Metabolite profiling uncovers plasmid-induced cobalt limitation under methylotrophic growth conditions. PLOS ONE 4:e7831. https://doi.org/10.1371/journal.pone.0007831
Liang WF, Cui LY, Cui JY et al (2017) Biosensor-assisted transcriptional regulator engineering for Methylobacterium extorquens AM1 to improve mevalonate synthesis by increasing the acetyl-CoA supply. Metab Eng 39:159–168. https://doi.org/10.1016/j.ymben.2016.11.010
Lim CK, Villada JC, Chalifour A et al (2019) Designing and Engineering Methylorubrum extorquens AM1 for Itaconic Acid Production. Front Microbiol 10:1–14. https://doi.org/10.3389/fmicb.2019.01027
Liu Q, Kirchhoff JR, Faehnle CR et al (2006) A rapid method for the purification of methanol dehydrogenase from Methylobacterium extorquens. Protein Expr Purif 46:316–320. https://doi.org/10.1016/j.pep.2005.07.014
Marx CJ, Lidstrom ME (2001) Development of improved versatile broad-host-range vectors for use in methylotrophs and other Gram-negative bacteria. Microbiology 147:2065–2075. https://doi.org/10.1099/00221287-147-8-2065
Ochsner AM, Sonntag F, Buchhaupt M et al (2015) Methylobacterium extorquens: methylotrophy and biotechnological applications. Appl Microbiol Biotechnol 99:517–534. https://doi.org/10.1007/s00253-014-6240-3
Peel D, Quayle JR (1961) Microbial growth on C1 compounds. 1. Isolation and characterization of Pseudomonas AM 1. Biochem J 81:465–469. https://doi.org/10.1042/bj0810465
Peyraud R, Kiefer P, Christen P et al (2009) Demonstration of the ethylmalonyl-CoA pathway by using 13C metabolomics. Proc Natl Acad Sci U S A 106:4846–4851. https://doi.org/10.1073/pnas.0810932106
Salis HM (2011) The ribosome binding site calculator. Methods Enzymol 498:19–42. https://doi.org/10.1016/B978-0-12-385120-8.00002-4
Sathesh-Prabu C, Ryu YS, Lee SK (2021) Levulinic Acid-Inducible and Tunable Gene Expression System for Methylorubrum extorquens. Front Bioeng Biotechnol 9:1–10. https://doi.org/10.3389/fbioe.2021.797020
Schada von Borzyskowski L, Remus-Emsermann M, Weishaupt R et al (2015) A set of versatile brick vectors and promoters for the assembly, expression, and integration of synthetic operons in Methylobacterium extorquens AM1 and other Alphaproteobacteria. ACS Synth Biol 4:430–443. https://doi.org/10.1021/sb500221v
Schada von Borzyskowski L, Sonntag F, Pöschel L et al (2018) Replacing the Ethylmalonyl-CoA pathway with the Glyoxylate shunt provides metabolic flexibility in the central carbon metabolism of Methylobacterium extorquens AM1. ACS Synth Biol 7:86–97. https://doi.org/10.1021/acssynbio.7b00229
Schrader J, Buchhaupt M, Sonntag F, et al (2016) Process for de novo microbial synthesis of terpenes. WO 2016/142503 A1 (Patent)
Shigi Y (1989) Inhibition of bacterial isoprenoid synthesis by fosmidomycin, a phosphonic acid-containing antibiotic. J Antimicrob Chemother 24:131–145. https://doi.org/10.1093/jac/24.2.131
Sonntag F, Buchhaupt M, Schrader J (2014) Thioesterases for ethylmalonyl–CoA pathway derived dicarboxylic acid production in Methylobacterium extorquens AM1. Appl Microbiol Biotechnol 98:4533–4544. https://doi.org/10.1007/s00253-013-5456-y
Sonntag F, Kroner C, Lubuta P et al (2015a) Engineering Methylobacterium extorquens for de novo synthesis of the sesquiterpenoid α-humulene from methanol. Metab Eng 32:82–94. https://doi.org/10.1016/j.ymben.2015.09.004
Sonntag F, Müller JEN, Kiefer P et al (2015b) High-level production of ethylmalonyl-CoA pathway-derived dicarboxylic acids by Methylobacterium extorquens under cobalt-deficient conditions and by polyhydroxybutyrate negative strains. Appl Microbiol Biotechnol 99:3407–3419. https://doi.org/10.1007/s00253-015-6418-3
Toyama H, Anthony C, Lidstrom ME (1998) Construction of insertion and deletion mxa mutants of Methylobacterium extorquens AM1 by electroporation. FEMS Microbiol Lett 166:1–7. https://doi.org/10.1111/j.1574-6968.1998.tb13175.x
Yang Y-M, Chen W-J, Yang J et al (2017) Production of 3-hydroxypropionic acid in engineered Methylobacterium extorquens AM1 and its reassimilation through a reductive route. Microb Cell Factories 16:179. https://doi.org/10.1186/s12934-017-0798-2
Zerbe P, Chiang A, Yuen M et al (2012) Bifunctional cis-Abienol Synthase from Abies balsamea Discovered by Transcriptome Sequencing and Its Implications for Diterpenoid Fragrance Production. J Biol Chem 287:12121–12131. https://doi.org/10.1074/jbc.M111.317669
Acknowledgements
This study was funded by the German Federal Ministry of Education and Research (BMBF) in the project ChiraMet (FKZ 031B0340A). We thank J. A. Vorholt for providing us with plasmid pQ2148. We further thank T. J. Erb for providing us with pTE105_mCherry.
Funding
Open Access funding enabled and organized by Projekt DEAL. This study was funded by the German Federal Ministry of Education and Research (BMBF) in the project ChiraMet (FKZ 031B0340A).
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception, design and data analysis. Material preparation and data collection were performed by LP, EG, PJ and FS. The manuscript was written by LP and MB. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
Part of this work is published in the international patent WO2016/142503 A1 (BASF, Ludwigshafen, Germany).
Conflict of interest
Part of this work is published in the international patent WO2016/142503 A1 (BASF, Ludwigshafen, Germany).
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Pöschel, L., Gehr, E., Jordan, P. et al. Expression of toxic genes in Methylorubrum extorquens with a tightly repressed, cumate-inducible promoter. Antonie van Leeuwenhoek 116, 1285–1294 (2023). https://doi.org/10.1007/s10482-023-01880-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10482-023-01880-7