Abstract
A micromechanics model for the prediction of elastic properties of reinforced polymers taking into account the agglomeration of fillers is developed. The influence of the shape of fillers on the results is discussed on the basis of a model developed earlier (Tandon and Weng in Compos. Sci. Technol. 27:111–132, 1986). The analysis is extended further for the consideration of possible agglomeration of fillers, and a micro-structure parameter \(\eta \) is accordingly introduced for its characterization. The values of the \(\eta \)-parameter are in the interval from zero to unity; higher value of \(\eta \) implies a greater degree of agglomeration of fillers. The applications of the model to some polymers reinforced with single-walled carbon nanotubes (SWNTs) are discussed; theoretical predictions are compared with experimental and numerical results available in the literature. It is concluded that the \(\eta \)-parameter increases with the volume fraction of fillers in current fabrication processes, and the agglomeration of fillers renders the reduction of the stiffness-enhancement capability of SWNTs.
Similar content being viewed by others
References
Christensen, R.M.: Mechanics of Composite Materials. Wiley, New York (1979)
Mori, T., Tanaka, K.: Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metallurgia 21, 571–573 (1973)
Taya, M., Chou, T.W.: On two kinds of ellipsoidal inhomogeneities in an infinite elastic body: an application to a hybrid composite. Int. J. Solids Struct. 17, 553–563 (1981)
Taya, M., Mura, T.: On stiffness and strength of an aligned short fiber reinforced composite containing fiber-ed cracks under uniaxial applied stress. ASME J. Appl. Mech. 48, 361–367 (1981)
Tandon, G.P., Weng, G.J.: Average stress in the matrix and effective moduli of randomly oriented composites. Compos. Sci. Technol. 27, 111–132 (1986)
Eshelby, J.D.: The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc. R. Soc. Lond. A 241, 376–396 (1957)
Hashin, Z., Shtrikman, S.: A variational approach to the theory of the elastic behavior of multiphase materials. J. Mech. Phys. Solids 11, 127–140 (1963)
Weng, G.J.: Some elastic properties of reinforced solids, with special reference to isotropic ones containing spherical inclusions. Int. J. Eng. Sci. 22, 845–856 (1984)
Wu, T.T.: The effect of inclusion shape on the elastic moduli of a two-phase material. Int. J. Solids Struct. 2, 1–8 (1966)
Hill, R.: Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys. Solids 11, 357–372 (1963)
Chiang, C.R.: An extended Mori-Tanaka’s micromechanics model. In: 16th International Conference on Composite Materials, Kyoto, Japan (2007)
Barai, P., Weng, G.J.: A theory of plasticity for carbon nanotube reinforced composites. Int. J. Plast 27, 539–559 (2011)
Wang, Y., Shan, J.W., Weng, G.J.: Percolation threshold and electrical conductivity of graphene-based nanocomposites with filler agglomeration and interfacial tunneling. J. Appl. Phys. 118, 065101 1-10 (2015)
Song, Y.S., Youn, J.R.: Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites. Carbon 43, 1378–1385 (2005)
Lusti, H.R., Gusev, A.A.: Finite element predictions for the thermoelastic properties of nanotube reinforced polymers. Modell. Simul. Mater. Sci. Eng. 12, S107–S119 (2004)
Selmi, A., Friebel, C., Doghri, I., Hassis, H.: Prediction of the elastic properties of single walled carbon nanotube reinforced polymers: a comparative study of several micromechanical models. Compos. Sci. Technol. 67, 2071–2084 (2007)
Zhang, X., Liu, T., Streekumar, T.V., Kumar, S., Hu, X., Smith, K.: Gel spinning of PVA/SWNT composite fiber. Polymer 45, 8801–8807 (2004)
Felbeck, D.K., Atkins, A.G.: Strength and Fracture of Engineering Solids. Prentice-Hall, New Jersey (1984)
López Manchado, M.A., Valentini, L., Biagiotti, J., Kenny, J.M.: Thermal and mechanical properties of single-walled carbon nanotubes-polypropylene composites prepared by melt processing. Carbon 43, 1499–1505 (2005)
Beran, M.: Statistical Continuum Theories. Wiley Interscience, New York (1968)
Kröner, E.: Statistical Continuum Mechanics. Courses and Lectures No92, International Centre for Mechanical Sciences, CISM, Udine, Springer, Wien-New York (1972)
Milton, G.W.: Bounds on the elastic and transport properties of two-component composites. J. Mech. Phys. Solids 30, 177–191 (1982)
Nomura, S., Chou, T.W.: Bounds for elastic moduli of multiphase short-fiber composites. J. Appl. Mech. 51, 540–545 (1984)
Weng, G.J.: The theoretical connection between Mori-Tanaka-Walpole bounds. Int. J. Eng. Sci. 28, 1111–1120 (1990)
Torquato, S.: Random heterogeneous media: microstructure and improved bounds on effective properties. Appl. Mech. Rev. 44, 37–76 (1991)
Chiang, C.R., Weng, G.J.: A new look at Hill’s arithmetic and geometric means for a two-phase, isotropic composite. Acta Mech. 156, 1–12 (2002)
Chiang, C.R.: Three-point geometric parameter for the transverse cross section of a fibrous composite. Acta Mech. 227, 1919–1926 (2016)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chiang, CR. Predictions of elastic properties of reinforced polymers accounting for the agglomeration of fillers. Acta Mech 228, 2933–2944 (2017). https://doi.org/10.1007/s00707-017-1856-x
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-017-1856-x