Abstract
The clamped–clamped beam has attracted increasing attention in the area of piezoelectric energy harvesting and transducer. In this paper, we present the theoretical models of clamped–clamped piezoelectric unimorph and bimorph beams with a quasi-static force in the middle. Based on the models, numerical studies are carried out to compare the generated charge, open-circuit voltage and generated energy of the piezoelectric beams under different condition. The simulation results demonstrate that the output performance of the beams are depended on the bonding position and electromechanical properties of the piezoelectric layer, and the length ratio, thickness ratio and the Young’s modulus ratio (YMR) of the piezoelectric layer and substrate. Specifically, the unimorph and bimorph beams share the same optimal length ratio while their optimal width ratio and thickness ratio are different. The YMR imposes a great impact on the performance of the beam both in the unimorph and bimorph cases. As a generalization, the models are not only suitable for the beam with a non-uniform cross-section but also applicable for the beam with uniform cross-section. The analyses can be used to improve the performance of the clamped–clamped beam working as an energy harvester and transducer.
Similar content being viewed by others
References
Abdelkefi A, Yan Z, Hajj MR (2013) Modeling and nonlinear analysis of piezoelectric energy harvesting from transverse galloping. Smart Mater Struct 22:025016
duToit NE, Wardle BL, Kim SG (2005) Design considerations for MEMS-scale piezoelectric mechanical vibration energy harvesters. Integr Ferroelectr 71:121–160
Erturk A, Inman DJ (2008a) Issues in mathematical modeling of piezoelectric energy harvesters. Smart Mater Struct 17:065016
Erturk A, Inman DJ (2008b) A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. J Vib Acoust 130:041002
Giffney T, Yu M, Aw KC, Zhang H (2013) Contactless RF MEMS switch using PZT actuation. In: 8th IEEE international conference on Nano/Micro Engineered and Molecular Systems (NEMS), pp 861–864
Hajati A, Kim S (2011) Ultra-wide bandwidth piezoelectric energy harvesting. Appl Phys Lett 99:3105–3107
Hajati A, Bathurst SP, Lee HJ, Kim SG (2011) Design and fabrication of a nonlinear resonator for ultra wide-bandwidth energy harvesting applications. 24th IEEE international conference on Micro Electro Mechanical Systems (MEMS), Cancun, Mexico, pp 1301–1304
Kim S, Clark WW, Wang QM (2005a) Piezoelectric energy harvesting with a clamped circular plate: experimental study. J Intell Mater Syst Struct 16:855–863
Kim S, Clark WW, Wang QM (2005b) Piezoelectric energy harvesting with a clamped circular plate: analysis. J Intell Mater Syst Struct 16:847–854
Li X, Shih WY, Aksay IA, Shih W (1999) Electromechanical behavior of PZT-Brass unimorphs. J Am Ceram Soc 82:1733–1740
Meyer Y, Collet M (2011) Active vibration isolation of electronic components by piezocomposite clamped–clamped beam. Mech Syst Signal Proc 25:1687–1701
Mo C, Wright R, Slaughter WS, Clark WW (2006) Behaviour of a unimorph circular piezoelectric actuator. Smart Mater Struct 15:1094
Mo C, Radziemski LJ, Clark WW (2007) Analysis of PMN-PT and PZT circular diaphragm energy harvesters for use in implantable medical devices. Proceedings of the SPIE smart structures and materials and nondestructive evaluation and health monitoring conference, San Diego, California, pp 652507–9
Mo C, Kim S, Clark AW (2009) Theoretical analysis of energy harvesting performance for unimorph piezoelectric benders with interdigitated electrodes. Smart Mater Struct 18:0550175
Smits JG, Dalke SI, Cooney TK (1991) The constituent equations of piezoelectric bimorphs. Sens Actuator A Phys 28:41–61
Sodano HA, Park G, Inman DJ (2004) Estimation of electric charge output for piezoelectric energy harvesting. Strain 40:49–58
Sun C, Qin L, Li F, Wang Q (2009) Piezoelectric energy harvesting using single crystal Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-PT) device. J Intell Mater Syst Struct 20:559–568
Wang Q, Cross LE (1999) Constitutive equations of symmetrical triple layer piezoelectric benders. IEEE Trans Ultrason Ferroelectr Freq Control 46:1343–1351
Wang F, Luo L, Zhou D, Zhao X, Luo H (2007) Complete set of elastic, dielectric, and piezoelectric constants of orthorhombic 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 single crystal. Appl Phys Lett 90:212903
Westra HJR, Poot M, van der Zant HSJ, Venstra WJ (2010) Nonlinear modal interactions in clamped–clamped mechanical resonators. Phys Rev Lett 105:117205
Acknowledgments
This work was financially supported by the Ministry of Science and Technology of China through 973 Program (No. 2013CB632902), and the Natural Science Foundation of China (Nos. 51332009, 51372258, 11304333 and 51272268).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liang, Z., Xu, C., Ren, B. et al. Theoretical analysis of energy harvesting performance for clamped–clamped piezoelectric beam. Microsyst Technol 21, 815–823 (2015). https://doi.org/10.1007/s00542-014-2237-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-014-2237-1